Keep the NumLock on after startup

Similar Questions

• Slow to open the first time after startup apps

  Slow to open the first time after startup apps

  How about, the second time, that is, close and reopen?

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• keep the class added after update css

  I have a page jsff based calls to action events a bean and this bean adds a css class to a button. When I press the button refresh, which disappears from the css class, I added the button (the entire page that remains the same). How can I keep the css class after a refresh of browser?

  ADF 11 g

  Rather than apply the css directly on the component, bind the style of the element attribute to an attribute of bean. According to your belongings, you change the attribute of bean. The component reads the css of the bean attribute all the time and gets no matter what the style is defined in the bean.

  Timo

• How to keep the video selected after you move the playback cursor

  I use Flash CS5.5

  After selecting a Clip, the properties panel displays its properties. When you move the cursor reading by dragging the mouse, the properties of this Clip are still visible in the properties panel. But as soon as I stop dragging and release the button of the mouse, the properties panel changes - it now shows the properties of the motion tween.

  Is there a method to keep the selected Clip after dragging the playhead and do not pass the selection to the motion tween? That's because after dragging the playback slider I still need the Clip properties, so I need to select again and again after dragging the playhead.

  You forget entirely on the query editor.

  Query Editor window->.

  When you slide on your scenario, this shows you all the key properties and their values as well as real keyframes. This is where you should be inspect and adjust the values.

  

  It took me a while to return to flash animation and when I started the conversion from the classic Tween system to the new system of motion tween I didn't know that this sign existed. He brings Flash a little closer to After Effects (my favorite animation tool). It's a lot better that the classic tweens, it's safe.

• How to keep the input value after click on the back button being the ADF

  Hi expert,

  I have a case currently the adf:

  1. I put 'value' in the Label 1

  2. I click on the next button

  3. I click on the "back" button

  4. the 'value' went from 1 label.

  

  How to keep the 'value' of 1 tag after I click back, do you have any suggestions?

  Kind regards

  Ricky

  Hello

  Where you store the value? Try to store it in a variable pageFlowScope or a property of the pageFlowScope bean.

  value = "#{pageFlowScope.testVar} '"

  value = "#{pageFlowScope.testBean.testVar} '"

  Kind regards

  Ruben.

• A way to keep the 'schema' object after the creation of mesh?

  From forms primitive, I created an object resembling a pipe and I would like to add a stitch to give an appearance of 3D lighting... HOWEVER, I like to keep the black features original, which defined the hose. Is it possible to do this? When the mesh is added to the object, the 'Plan' features disappear.

  Of course, I'm hoping that I missed something very basic details.  Thank you in advance.

  Once you have created your object mesh, select with the selection tool, then hover over the appearance Panel. He calls the object "Mesh". Click on the word mesh and then click on the drop-down menu where you see 'add new '.

  

  

  I hope this helps!

  Michael

• __Chess titans: change to keep the part saved after completion?

  Hello

  I did a search and finally understood what happened.  In Vista Chess Titans kept the same saved game even after completing the game.  I find wire-to-wire on the ' net to complain about this.

  Now, it seems that W7 Chess Titans erases the game after completion.  I understand why people want to do this.

  However, I would like to put a game so I can play differently to a conclusion.  Is it possible to change a value somewhere that keeps Chess Titans in W7 to delete a saved game once he is competing?

  Thanks in advance.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  If you want to save a game after finishing, you can visit the link below.

  http://Windows.Microsoft.com/en-us/Windows7/Chess-Titans-how-to-play

  Note the saved games in Windows 7 are stored in the path below.

  C:\Users\User\saved games

  You must save the file to a removable device, and you can insert this backup file next time if you want to play the game.

  If you find difficulties to perform the steps you can post back.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Keep the light on after (onClick)

  

  FIRST: I have a system menu 6 touches: when the user clicks on a link in the main menu it will light red and light up a fire just to the left of the link them rental know that they clicked with success. After the initial click, it will lower a sub menu with links. However, once they release the mouse button, the small green light turns off. I want that little green light to stay until they move the mouse outside the slide the Panel with the MAKE. How can I keep this light until the user moves the mouse outside the bounding box of the Sub-group of experts with links to void? should what code I insert?

  SECOND: When I publish to HTML, my slide panel that contains the MAKE is cut. How do it were the submenu goes above and on top of my Web page content just below instead to increase the size of my table?

  Here's a copy of my code. I'll post a picture in 30 minutes or less:

  Click EFFECT - submenus of the main menu will come down once the user clicks on a button.
  The submenu will arouse and disapper when the user mouse leaves the area of subgroup of experts.

  Import fl.transitions.Tween;
  Import fl.transitions.easing.Regular;
  Import fl.transitions.easing.Elastic;

  Stop();

  menu_cont.prices_rect.Alpha = 0;

  
  menu_cont.prices_btn.addEventListener (MouseEvent.CLICK, pricesonClick);
  menu_cont.prices_rect.addEventListener (MouseEvent.MOUSE_OUT, pricesMouseOut);

  function pricesonClick(event:MouseEvent):void {}
  var pricesMenuTween:Tween = new Tween (menu_cont.prices_menu, "y", Regular.easeOut, menu_cont.prices_menu.y, 75,40,.5, true);
  }

  function pricesMouseOut(event:MouseEvent):void {}
  var pricesMenuTween2:Tween = new Tween (menu_cont.prices_menu, "y", Regular.easeOut, menu_cont.prices_menu.y - 94.60,.8, true);
  }

  If you greenlight anywhere in your code, you did not what I described.  Read it carefully, take your time.

  .

• Should I keep the old windows after the re-installation?

  Original title: Reinstalling windows

  I have re-installed windows on my pc. He kept my old windows, but I want to know if I should keep or remove it completely.

  If you ask on the folder Windows.old so if you don't need all the files stored there, for example Documents, etc., then you can remove it.

• Converter to keep the primary Partitions after conversion.

  Hi all

  So we just started to use the converter for P2V, its an impressive tool. I noticed that his change of level primary logical partitions to drives. Not a huge problem, but if I add space on the logical drive he immediately wants to convert it to a dynamic disk. Dynamic disks is something of normally, we don't use in our environment. I ran through by converter some times, is there something I'm missing? We took the latest version - I would add that this server physical I have set up to test the converter in our laboratory.

  

  Before the conversion on the physical server.

  

  After conversion on VM.

  

  Thank you

  Javier

  Hi Javier,

  Unfortunately, it is a long-standing problem in the converter, but it has never been highly prioritized in order to process and fixed. I guess the assumption was that "it doesn't hurt" to have logical partitions. This is the first time I've heard that there are real problems - additional free space at the end cannot be used unless that switching to dynamic disks. We must need to revisit this bug again and hiérarchisera as it accordingly.

  As a solution, I would say you can resize volumes as part of the conversion process - you can add free space on each volume in the conversion wizard and would not need additional resizing after that. I know that's not a real problem, but it might be enough for your case.

  Kind regards

  Ivan

• My watch keeps the password locking after the iOS2.1

  My watch used only need the password when I put in the morning.

  He would know that there on my wrist for the rest of the day, as it should.

  Since the upgrade to Watch OS 2.1 it continually needs unlock code while remaining on my wrist.

  Today alone I unlock it about 20 times.

  Apple support suggested turning off wrist recognition but which would disable ApplePay and health monitoring features.

  Help? Suggestions?

  Hi Adam

  If your watch has a hardware failure, it may be eligible for the warranty (subject to the usual warranty).

  Apple support to help determine if your watch should be checked under the guarantee, it may be prudent to follow their recommended troubleshooting steps (which may include disabling and re-enabling wrist detection and access code), and supported the continuation of your record of taking.

• The computer hangs after startup - operating in Mode safe

  "My computer doesn't meet not what whatsoever once home page is pulled to the top. However, it works fine in safe mode. Please help. »

  Alternatively, you can remove your phone number. It is never wise to post personal information on a public forum; you might be contact by people who aren't very nice.

  Please start with the basics and the post back with results of additional assistance. Do not skip the preparatory work.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• Why some paragraphs keep the old format after editing while Para Designer please?

  With the help of 10 on Win 7 Pro frame

  I'm trying to change the font and color for a few paragraph with paragraph Designer tags.

  Most of the paragraphs change OK when I click on update, but there are strange paragraphs that do not change with the rest. For example, try to apply changes to the text of the Table changes some cells, but not others, even in the same table. I find it rather impossible to believe.

  Similarly, for some of my numbered lists changes that affect the actual figure number correctly (tested by changing the color parameter), but the text retains the old font and color

  I change my tags offending outside the designer of Para, but I suspect that they will just return to the old style if I close and reopen the chapter.

  Any help please?

  Thank you

  Phil

  Re:... but there are strange paragraphs that do not change with the rest.

  No chance that they have applied character Formats?

• How to get to keep the tablespaces work after datafile deleted on OS

  Hello
  
  situation like this:
  
  1 operating system HP - UX 11i
  2 oracle 9.2 or 10 g
  3. the tablespace AAA have a data file AAA.dbf
  4 AAA.dbf has been removed by a guy on BONES by accident
  5. it is a production database, I have another copy of the product running elsewhere
  6. we cannot forget this tablespace data, just want to make sure that the new data will be always inserted
  
  I know there is a magical way involving the file descritpor to the recovery of the file to the operating system if it is still open by the process
  seems that it works on linux or solaris, HPUX with / proc
  
  Here's what I did,
  1. in offline mode, drop the tablespace
  2 export the AAA to another DB without data tablespace but everything else
  3. import in DB without AAA now
  
  the problem seems to only application could not insert object priveledge not given in the tables,
  I had checked the export file, these SQL object grants are there, I don't know why the import failed
  
  so my question is
  If it was you,
  1. you have a better idea of how to do to recover
  2. If you anyway dirty and quick recovery of the file box from HP, who also appreciate
  3 can you image why import doesn't seem to get any priveledge? My DB version 9.2.0.4
  
  Thank you very much
  
  BR/ricky

  If you have the newspaper archive since the data file created, you can retrieve data from the data file. It is a long long method if the file created long back.

  measures

  take the tablespace and datafile is eliminated

  alter tablespace off-line test;

  create the file that has been deleted.

  ALTER database create datafile ' / disk2/data/test_01.dbf' as ' / disk2/data/test_01.dbf';

  recover tablespace test;

  alter tablespace test online;

• Activate the NumLock at startup - like X 360

  Hello

  Is there a way to activate the NumLock at startup for HP envy x 360?  It's frustrating for him, I use the method of axis on windows 8, simly because his character only 4 and I don't have to hit enter. There is also no light on the button to indicate its status.

  The BIOS details:

  Insyde, version: F.06

  Exit the: 12/06/14

  Hello @wmhp ,

  Welcome to the HP Forums!

  I appreciate that you try to find a way to activate the NumLock feature on startup.

  Try this simple regedit:

  1. run the registry editor. (Windows key + R, regedit, OK)
  2. navigate to (and click on) HKEY_CURRENT_USER\Control Panel\Keyboard
  3. change the value of the InitialKeyboardIndicators from 0 to 2.

  NOTE: Always back up the registry before making changes. Make it open regedit window and click file > export... Save the file to a location that you will remember. If something happens after editing the registry, you can start in safe mode and Open regedit to import the backup version.

  The registry should remember if the NUMLOCK is turned on or off when you turn off your laptop. Make sure that the NUMLOCK is turned on before you turn off your PC.

  Let me know if it works for you.