640 proBook G2: Problems on HP Probook G2 640 Broadcom wireless installation

Similar Questions

• HP Mini 210 Windows 7 32 bit 4313 Broadcom wireless problem, perhaps.

  I got my mini MP 210 with XP a few days ago House.  I've upgraded to WIndows 7 yesterday.  After installing, everything was humming very well, even the wireless.  I thought it's too good to be true.  Then Windows installed 21 updates.  After the updates that my wireless has been sprayed.  Same problems everyone else has documented ihere.  I think that there is something in these updates in conflict with the driver Broadcom 4313.

  To make a long story short, I found the previous version of the hp/broadcom driver.  The URL is:

  ini-210-PC-Broadcom-Wireless-LAN-Driver-5-60-18-4 http://www.userdrivers.com/notebook-Tablet-PC/HP-M...

  Right-click on the computer click Properties-, and then click Device Manager.

  Right-click on Broadcom 4313 802.11b/g/n (in network adapters), and then click on uninstall.  Check box to remove the driver for this device.  You should be uninstall driver version 5.60.350.6 dated dated 22/03/10

  Reboot, and then install the driver from the URL above.  This is the version 5.60.18.41dated 10/23/09.

  So far, I'm 2 for 2 with my wireless works now.

  My guess is that HP will have to come out with a new driver to fix this new conflict with WIn7.

  It is a follow-up to my original post.

  The old version of the Broadcom wireless driver has not fixed the problem.  WiFi was always intermittent.  Sometimes she would see my wireless home and sometimes she would bring free wireless.  I tried various things throughout the weekend.

  Last night I went to windows update and it says there are two updates to install.  One of them was

  Microsoft Update driver for Realtek RTL8102E/RTL8103E Family PCI - E Fast Ethernet NIC (NDIS 6.20)

  Well after I did this update as all my problems wireless went.  Maybe the Realtek driver has demolished the Broadcom wireless.  I think that HP knew there was a problem and got Microsoft to send the update to fix.it.  Just my guess.

• Problem with Broadcom wireless driver for HP Pavilion 15-p053eu

  Hello, I have a problem with the installation of the broadcom wireless driver for HP Pavilion 15-p053eu running on Windows x 64 8.

  When I download and try to install the driver I get this error...

  

  

  I really don't know what to do...

  Hello:

  If you want to run on your PC W7, good wlan driver BCM you need which should produce a full-power signal.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133353_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You also need this software bluetooth...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132205_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• There was a problem installing this card material Ralink Turbo wireless LAN, that an error occurred during the installation of the device. The system cannot find the specified file.

  Opus system Windows XP Edition SP3 eddition family

  I tried to install two NICs - Netgear RangeMax Wireless - N USB 2.0 adapt WN111v2 and PCI Ralink Startech 555WG 801,11 g Wireless PCI Adapter Card. In both applications on the end of the installation I received the message that installation failed.

  I downloaded all the latest drivers, disabled antiwirus program and firewall, I called the software factory. Nothink helped. Everything is pointing to problem windows install the drivers.

  For installation of Netgear USB wireless adapter WN111v2 - after installing software you plug wirelles adapter to the USB port and start the final driver configuration. After that I get message "installation of the client software has failed. Restart your computer and run Setup again.

  Can you help me?

  Hello
  
  Step 1: Adding to the suggestion of A70M1C, you can also check if the problem persists in the clean boot state.
  Reference: http://support.microsoft.com/kb/310353
  
  

  Step 2: Also check if you can find any error message in the event viewer and send back the same.

  Reference:
  http://support.Microsoft.com/kb/308427
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

  Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
  Message: Installation error prevented the service pack 2 windows systems (KB948465)

  http://support.Microsoft.com/kb/956702

  «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

  Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  http://support.Microsoft.com/kb/947821/

  "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

  If the above solves the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ProBook 455 L3P93ES G2 #ABZ: installation without end and return the video driver AMD R6 and R7 M260DX and stop on a black screen system

  Hello, I'm in trouble with this problem. If anyone can help me, I appreciate a lot. Thank you in advance.

  Laptop: HP ProBook 455 G2 L3P93ES #ABZ

  Problem: windows back AMD R6 and R7 video driver to the old version of windows update install. Return process the screen come black and stop here.

  Procedure, I followed:

  1. updating the bios with the latest version (M75_0141.bin)
  2. new facility created by HP Cloud recovery customer USB boot disk
  3. Install the drivers and programs of the HPSoftwareSetup.exe util
  4. Connect the network cable and upgrade the drivers and the HP Support tool programs assistant
  5. Install the software
  6. Join the Organization's domain
  7. Force Windows Update to version 1607 by the upgrade of Windows tool
  8. Windows Update

  Item 4, at random, windows update 10 and return the driver from these versions:

  • 15.201.1301.0
  • 15.201.2301.0
  • 15.300.1025.1001

  I don't have install the AMD specific video driver (Radeon Crimson Edition 16.7.3 software) or drivers from the Chipset AMD (Crimson edition 16.7.3) because when I try in a previous installation of test I had the same problems

  To restore the display I have to start windows in safe mode and disable the two R6 and R7 display cards, and then restart. After that I can reactivate the cards one time.

  This device first question first time I install Windows 10 the year in August (Yes, after a few days Windows 10 out)

  Any help that will be much appreciate because I have to reinstall on 20 laptops for the school to start the day.

  Thank you

  ScuolaCarovana

  Hello;
  
  Let me welcome you on the HP forums!
  
  From your description, it seems that, after you have installed the correct video driver for your ProBook (15.201.1301) AMD, Windows Update is then by installing a different driver on top of that, right version?

  If this is the case, you must follow these instructions to STOP Windows update update drivers: how stop Windows 10 to update automatically the device drivers - windows Windows 10-10

  Once you do this, you should not see updates to the pilot after that.

  Good luck

• HP Probook 4710 s sky wireless

  I have a brand new HP Probook s 4710 with Windows 7 Professional to work on Friday.

  Works wirelessly to the office okay.

  Home - have a sky Netgear (think it of a DG843T but not marked and can't see model in the admin page)

  My Iphone works wireless on this device, like a Nintendo Wii.

  I connect to my WIFI, HP shows connection but never get there. Comes right back as unable to connect.

  I check the settings of the adapter on HP - a noted that the that WLAN broadcast set to channel 11 and router on 1 changed wlan to match - still does not.

  Then tried to set security to

  WEP/WPA Pre Shared Key without joy - I was copying the key in a text file then don't transfer via a USB key so no typos.

  Even then I disabled the security on the wireless router and laptop computer still does not connect.

  All device drivers are present and functioning.

  Anyone who has experienced a similar problem or have some pointers?

  Thank you

  Panic-had another Cup of coffee.

  Drivers downloaded again to ensure that the vouchers have been installed (wasn't me that installation OS & drivers so couldn't be 100%)

  Set up a connection manually instead of plug and it connected OK? This yesterday, but maybe not to use a WEP 128 bit key, as tried many combinations of things.

  Please consider closed topic - can't see a way to remove just the job...

  Thank you

• ProBook 6560 b: Probook 6560 b - LG650ET - wireless module not supported ID of Module WLAN (702)

  I have a HP probook 6560 b with the motherboard 646964-001 REF.

  Current BIOS: F.61 Rev.A

  The wireless module is 631954-001 Ref. WLAN 6205 Intel 802.11a/b/g/n PCIe network map

  I've looked everywhere and the WLAN module should be supported, why it doesn't work?

  I have tried factory reset the BIOS and have a box to open with HP, but I am not getting anywhere.

  Looking here it should be compatible?

  http://PartSurfer.HP.com/search.aspx?SearchText=LG650ET

  @typk

  As long as the WiFi card has this label to the HP part on that number then your good to go.

  REO

• 4540 proBook s (Energy Star): Wireless got disabled - unable to start - no WiFi or Bluetooth

  My laptop worked well until one day all of a sudden the wireless got off. Switch wireless on my laptop has definitely turned amber (medium amber wireless is disabled and white wireless is enabled). Here are my comments or things that I tried in vain to solve the problem:

  1. When you press the plane mode switch gets toggled indicating that the switch is responding well but does not change the status of wireless.
  2. I checked the Device Manager and there was no sign of WIFI or Bluetooth. Then I reinstalled the drivers concerned. Still, there was no sign of WLAN & Bluetooth.
  3. Then I tried Safe Mode. Once again no sign of WIFI or Bluetooth in the Device Manager.
  4. Then I went for the Mode safe mode with networking. Once again no sign of WIFI or Bluetooth in the Device Manager.
  5. I tried disabling and activation then wireless in the start menu (F10), but still it did not work.
  6. I contacted HP Support. They took control of the remote control of my laptop and just reinstalled the drivers and told me that they could not solve the problem.

  I don't know that it's more a software problem that emit materials. There was a small bit of software called HP Wireless Assistant that could replace the physical wireless switch but unfortunately I can't find a compatible version to win 8.1.

  Can anyone help me please with this problem. It's terrible to use internet using Ethernet. Every day that passes is like a punishment for me. Please help me...

  Have you tried reinstalling the wireless card to be sure it has a good connection? Try to run to the top once with it deleted... then stop and reinstall.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.

• Problem with user access rights invited after the installation of el capitan (10.11.6)

  After that I installed OS X El Capitan (10.11.6), I can't change the way the guest user can access applications.

  When I change the usage rights of the guest user in Control Panel (user admin), everything's fine. Safari is the only application that I leave available. But then, nothing has really changed and guest user can use all applications. When I make the change, the guest user is disconnected (otherwise changes cannot be made).

  Could someone help me in this problem.

  There are problems with Parental controls do not stick in El Capitan.

  There is a long thread about this; of some people have found workaround solutions, but they do not always seem to work.

  OS X El Capitan: controls parental NOT work

• Photosmart 6510: Problems with registration of the analyses after the installation of Sierra on the Mac.

  After the installation of Sierra on the iMac, it is impossible to save a scan. You can't send it to a card. The printer is not a problem.

  With my old iMac with OS Lion everything works as it should and there is no problem, so I think it has to do with not working is not driver problem?

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.