Keep the text perpendicular to the base line when you use the string.

Similar Questions

• Now shift isn't snapping line when you use the line Segment tool

  I could be wrong and it has always been like that, but when I take a shift to rotate a line created by using the line Segment tool turns is more degrees as I thought that it used to. I checked and it works always with the Rectangle tool, but not when I traced a line. Guides and snap to Point are both on.

  Is much more annoying when I'm dragging an end point and it will remain at an ideal level of 90 or 45 angle... but nevertheless it remains valid this angle when I paint, just do not change.

  Matt,

  You are not alone.

  See this thread with a link to the other thread:

  https://forums.Adobe.com/message/8274663#8274663

• How can I change the line spacing of the double to single spacing between lines when you use Wordpad in Windows 8?

  How can I change spacing of double room to single space?

  I tried.  I changed the line spacing of 1.5 to 1, but it made no difference.  I also highlighted the text and hold the Ctrl and 1 keys at the same time, as suggested elsewhere.  None of these things worked.  My laptop runs Windows 8 operating system.  What now?

• Error "Invalid line" when you use the command tableFile - ttImportFromOracle

  Execution of the order and got an error, as shown below:

  c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt
  Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt'
  Use '-help' for more information
  
  

  table_list.txt looks to below, except I have 112 tables total in the list, a table by line, as indicated in the help documentation.

  mySchema.myTable

  mySchema.myTable1

  mySchema.myTable2

  I tried to make the file table_list.txt have only the table (without figure) names and the same error occurs.

  Invalid line is always the last table in the file. So if I take off the table she complains, she complains always just whatever the table is the last in the file.

  Can someone tell me what I am doing wrong?

  Thank you

  Matt

  To work around the error, I just used - tables instead.

• HP Officejet Pro 8600: Printing vertical lines when you use doc auto power

  I cleaned the optical window such as suggested in other posts. However, this has not fixed the problem for me.

  The vertical line is the center of the page, from top to bottom.

  Hello @KR76,

  I'd be happy to help you with your problem of copy on your OfficeJet Pro line 8600.

  Basically, the line is created if any part of the scanner glass and the scanner cover fingerprints fingerprints, stains, lint, dust, or other debris or scratches. To resolve this problem, clean the ADF scanner glass Strip, the ADF white plastic band on the underside of the scanner cover, the underside of the scanner cover and the scanner glass. You need to repeat the cleaning several times to fix this.

  The document that will guide you through the inspection and cleaning of these independent pieces would be; Vertical stripes, lines or streaks in the Copies, faxes, or scans.

  Take note of the following in the document;

  Warning: Only use a glass cleaner to clean the scanner glass. Don't use of cleaners containing abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the printer. Avoid alcohol isopropyl (rubbing alcohol) because it can leave scratches on the glass.

  Warning: To protect the scanner are not spray the glass product directly on the glass.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• need to get only one line when you use between (date columns)

  Hi all

  create the table SAMPLE_ITEMS

  (ITEM_NO, varchar2 (10))

  Date DELIVERY_DATE,

  Number of QTY_SUM1

  Number of QTY_SUM2

  Number ITEM_QTY,

  Number ORDER_QTY,

  Number ITEM_AMOUNT,

  Number of SALES_AMOUNT

  );

  insert into SAMPLE_ITEMS values ('AAA', ' 28 / 04/2014 ',-88, 0,475,262,-123.45,-1188);

  insert into SAMPLE_ITEMS values ('AAA', ' 28 / 05/2014 ', 0, - 122, 475, 262, - 10.234,-1647);

  insert into SAMPLE_ITEMS values ('AAA', ' 16 / 06/2014. ', 0, 0,475,262,-80.59,-135);

  insert into SAMPLE_ITEMS values ('AAA', 19 December 2014 ', 0, 0,475,262,-42.29,-67.5);

  Setting out with my own query,

  ITEM_NO	TRUNC (DELIVERY_DATE)	QTY_SUM1	QTY_SUM2	ITEM_QTY	ORDER_QTY	ITEM_AMOUNT	SALES_AMOUNT
  AAA	28/04/2014	-88	0	475	262	-123.45	-1188
  AAA	28/05/2014	0	-122	475	262	-10.234	-1647
  AAA	16/06/2014	0	0	475	262	-80.59	-135
  AAA	19/12/2014	0	0	475	262	-42.29	-67.5

  Every time I question as code

  Select * from SAMPLE_ITEMS

  where DELIVERY_DATE between April 28, 2014 ' and 19 December 2014 '-> they must pass as a parameter

  I need to get only one line

  AAA

  -88

  -122

  475

  262

  -256.564

  -3037.5

  Database 11.2.0.1.0

  Note; Please do not use MAX for Date and do not want to display Date columns in the result

  Note 1: I want to choose DELIVERY_DATE in select it also and only get a line like above the expected result

  SELECT item_no

  SUM (qty_sum1),

  SUM (qty_sum2),

  SUM (DISTINCT item_qty),

  SUM (DISTINCT order_qty),

  SUM (item_amount),

  SUM (sales_amount)

  OF SAMPLE_ITEMS

  WHERE the DELIVERY_DATE BETWEEN TO_DATE (28 April 2014 ', "dd/mm/yyyy")

  AND TO_DATE (19 December 2014 ', "dd/mm/yyyy")

  GROUP BY item_no;

  I will get

  ITEM_NO Trunc (DELIVERY_DATE) QTY_SUM1 QTY_SUM2 ITEM_QTY    ORDER_QTY TTEM_AMOUNT SALES_AMOUNT        

  AAA             12/19/2014                         -88                 -122                475                262                       -256.564              -3037.5

  OK fine, I want to choose DELIVERY_DATE as if so I'll have all the lines, but I want to only show one as shown above

  Because I do report discoverer in Oracle Apps, without taking the DELIVERY_DATE of the select query, it is not possible to move the date as a parameter

  Can you please help me how to do this?

  Thank you

  Post edited by: Rajesh123 NOTE added in the body of the Message

  Post edited by: added test Rajesh123 messages

  Maybe you want a single line in all cases

  Select si.item_no,

  start_date min (d.start_date),

  min (d.end_date) end_date,

  min (si.qty_sum1) qty_sum1,

  min (si.qty_sum2) qty_sum2,

  min (si.item_qty) item_qty,

  min (si.order_qty) order_qty,

  Sum (si.item_amount) item_amount,

  Sum (if. Sales_Amount) sales_amount

  of (start_date select to_date(:date_from,'dd-MON-yyyy'))

  to_date(:date_to,'dd-mon-yyyy') end_date

  of the double

  ) d

  left outer join

  TR sample_items

  on the si.delivery_date between d.start_date and d.end_date

  Group of item_no

  ITEM_NO	START_DATE	END_DATE	QTY_SUM1	QTY_SUM2	ITEM_QTY	ORDER_QTY	ITEM_AMOUNT	SALES_AMOUNT
  -	01/01/1900	31/12/2000	-	-	-	-	-	-

  Concerning

  Etbin

• Problem creating a new line when you use tabs regions

  I'm new on JHeadstart and ADF and use the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its effectiveness for a new application of significant size. As part of this evaluation, I created a small application (you can do this with the HR schema using say the Departments table) with a single entity and VO. I then placed some fields in several regions of element within a region by tabs on the same page and below the Group (Table, Table Overflow Style available below with separator style) on JHeadstart. Display the existing lines very well and I can view the data on separate tabs.
  
  However, if I try to create a line, I can fill in the data on the main area, but if I fill in the data on the first region of tabs I can not switch to the next without a mistake tab is generated.
  for example using departments - fill DepartmentId and DepartmentName on main region, learn ManagerId on first region by tabs and try to move to the second area by tabs to fill LocationId:
  Missing mandatory attributes for a line with key null of type HRModule.DepartmentsView1
  DepartmentId in HRModule.DepartmentsView1 attribute is required.
  DepartmentName in HRModule.DepartmentsView1 attribute is required.
  If you save, and then you can navigate.
  
  You can also prove something similar (but probably the same cause different error message) on the myJHSTutorial demo. If you go to an employee outside the regions page and try and create a new employee (using the button "+" under the label of 'Employees'), then the legs are not updated, and any attempt to change the tabs causes an error
  
  Could not validate a line with key oracle.jbo.Key [999] in HRModule.EmployeesView3
  Required attribute HRModule.EmployeesView3 wages.
  Wages must be between 6000 and 12000 for this work.
  
  The JHS Devguide does not help. Any thoughts? I can send the HR sample if you wish.

  David,

  That is right.
  The change in model will be added to the next version of JHeadstart so you don't have to make this change.

  Steven Davelaar,
  Jheadstart team.

• Lines of white brush model customized when you use raster/bitmap image

  Hello

  When to use a PNG image of raster/bitmap for a custom model brush, that I have the chance to see white lines when I use this brush on a stroke, whereas if I use a vector image (illustrator) for a model brush I don't see all the white lines.

  For example, I had two brushes model, perfect each containing a black rectangle of 256px X 256px. One is one PNG image which shows the white lines, the other a vector image (illustrator) who doesn't show white lines.

  

  How can I get rid of these white lines when you use an image as a brush model raster?

  It is probably the result when an image is interpolated for the corners.

  If you create a separate rounded image for the corners and use it to a rectangle, there is no need of distortion and the result would go well (within the limits of a bitmap into a vector application model).

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box, to an area of the page... rather than through a long straight line...?

  When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box on a specific area of the page... instead of the text box is in a long straight line...? I do not see there is an option or the ability to do so, just want to confirm.

  Improving the management of multiple line text fields is in our plans, but for now, you need to add manual carriage return (Enter).

  Thank you

  Josh

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• When you use the metro apps the computer displays a black background instead of a text being illegible white

  When you use the metro apps the computer displays a black background instead of a text being illegible white

  So basically I can't use the metro beyond the home screen interface
  Know of a solution:
  Using
  i7 processor
  640 m GPU NVIDIA
  6 GB memory
  It could be a driver problem or there at - it an option to change

  You have FXAA enabled in the NVidia Control Panel? That was the problem for me.
  Otherwise, just click on restore in Control Panel and it should fix the problem.

• I can't get a list of bullited when you use the synchronized text feature.

  I can't get a list of bullited when you use the synchronized text feature. The option is grayed out and no assets. Any tips? I'm doing something wrong?

  It is by default, the synchronized text does not change any style and other visual attributes associated with the instance.

  Thank you

  Sanjit

• Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  No one can tell you anything without the proper system or other technical details info. The standard answer with all the problems of text is quite simply, you have a "bad policy" on your system and need to get rid of him.

  Mylenium

• Collect in bulk in stores less number of lines in the collection when you use the LIMIT?

  I wrote the following PL SQL anonymous block. However, the line dbms_output.put_line (total_tckt_col. FINALLY gives me) output as 366 (DBMS_OUTPUT is Developer SQL) which is correct when there is no limit. If the limit is set at 100 in the FETCH statement then dbms_output.put_line (total_tckt_col. Give me FINALLY) 66. What I'm doing wrong here?

  
  

  DECLARE

   CURSOR cur_total_tckt 
   is
   select  t.ticket_id ticket_id, t.created_date created_date, t.created_by created_by, t.ticket_status ticket_status,
  t.last_changed last_changed, h.created_date closed_date
   from n01.cc_ticket_info t
   inner join n01.cc_ticket_status_history h
   on (t.ticket_id = h.ticket_id)
   where t.last_changed >= '6/28/2012 17:28:59' and t.last_changed < (sysdate + interval '1' day);

  type total_tckt_colcn
   is
   TABLE OF cur_total_tckt%rowtype;
  total_tckt_col total_tckt_colcn;
  total_coach_col total_tckt_colcn;
   begin

  total_tckt_col  := total_tckt_colcn ();
  total_coach_col := total_tckt_colcn ();
   OPEN cur_total_tckt;
  loop
   fetch cur_total_tckt bulk collect into total_tckt_col;
-- fetch cur_total_tckt bulk collect into total_tckt_col limit 100;
   EXIT
   WHEN (cur_total_tckt%NOTFOUND);
   END LOOP ;
   CLOSE cur_total_tckt;  

  dbms_output.put_line(total_tckt_col.LAST); 

   FOR i IN total_tckt_col.first..total_tckt_col.last
  LOOP

  dbms_output.put_line(i);

   END LOOP;
   end;

  Jocelyn says:

  This is a modified version of your code on the standard table EMP in schema scott.

  Have you tested it? All you have is last batch has 4 rows. But you print outsite the loop. That way if the last batch is incomplete (within boundary lines) last batch does not have your loop. Suppose you want to print the enames:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of the total_tckt_col 5;

  EXIT WHEN cur_total_tckt % NOTFOUND;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER

  PL/SQL procedure successfully completed.

  SQL >

  As you can see, it didn't print the last batch. Why? Because NOTFOUND is set to true if the number of lines that you asked to fetch was not recovered. This last batch has 4 rows while the claim code to get 5. Therefore, NOTFOUND has the value true and outputs code before dealing with this last batch. Therefore, repeat the treatment code again once outside the loop:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of the total_tckt_col 5;

  EXIT WHEN cur_total_tckt % NOTFOUND;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER

  PL/SQL procedure successfully completed.

  SQL >

  But you have to accept to repeat that twice the processing code is no better solution. When you use BULK COLLECT LIMIT we should not leave NOTFOUND but rather by collection.count = 0:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of total_tckt_col 6;

  WHEN OUTPUT total_tckt_col.count = 0;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER

  PL/SQL procedure successfully completed.

  SQL >

  SY.