Kernel_Data_Inpage_Error STOP: 0X0000007A (0xc0000185, 0xBF9043B6, 0xE1238CA0, 0x0E213860)
It's the first many msgs of error msg that appears on my laptop screen after power on. It wasn't anything newly installed on my laptop. And I want to backup my files but I can not even past the F2 or F12 screen to do so. He no longers can't to the Windows form so I can get eRecovery (Acer Aspire 3680-2682 w/vista basic) or even in Safe Mode. What is wrong w / my laptop?
If you can not acess Acer eRecovery process, contact Acer at the link above.
It's Recovery process Acer, not Microsoft.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I had this problem with my computer, running Windows Vista Home Premium 32 bit, for several months now, where it will show the blue screen of death shows the error message above. It will be at random times, it seems to just freeze and sit there for a few minutes and then display the error message. I tried chkdsk, System Restore, defragment the HARD disk, running analysis antivirus/antispyware, security scans, check the registry errors, have all the updates and everything I can think of nothing. I saved some of the previous error messages that he brang upward in the same way if they can help with what either.
* [date - 16/06/09; 8:00p.m.] KERNAL_DATA_INPAGE_ERROR
Stop: 0x0000007A (0xC0415BBO, 0x000000E, 0x35AED860, 0x82B76000)
Storport.sys - address 82B 76000 based B 82, 41000, Datestamp 49e01ef7.* [day - 17/06/09] Stop: 0x0000007A (0xC000000E, 0x259268C0, 0xC0438A40, 0x87148EC4)
* DRIVER_STATE_POWER_FAILURE
Stop: 0 x 00000095 (0 x 00000003, 0x83AD8B70, 0x8560D2B0, 0 x 84417808)* [day - 27/08/09] DRIVER_STATE_POWER_FAILURE
Stop: 0x0000009F (0 x 00000003, 0x8611E030, 0x8611E030, 0xAS09E5B8)Pura9910
Hello
If a PC you can try reseating all the memory cards and cables (both ends) - are not just tight - actually remove
and replace. Remove ALL power before opening the case.95 is a Plug n not specified ' error to play and no help.
9F is usually power associated - powersupply thouugh, there might be question of device or driver and antivirus related.
7A
Cause
Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:
- 0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
- 0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
- 0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
- 0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
- 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.
These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).
Another common cause of this error message is the defective material or failing RAM.
A virus infection can also cause this bug check.
Solve the problem
Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.
If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.
Warning If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
Solve a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.
Solve a problem RAM failure: Run the hardware diagnostics feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.
Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.
Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.
Make sure that the latest Windows Service Pack is installed.
If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.
Solve an infection by the virus: Search your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.
--------------------------------------------------------------------------
It's my generic bluescreen convenience store which may help.
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I'm having this BSOD error for the last 6 months. I updated my drivers, run chkdsk and recovery system and the error is not always intentionally. Please help me to solve my problem. I realized that my ntfs.sys file does not work for windows vista.
In addition, it can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
For the last two weeks, I received a stop erro: on the BSOD kernel_data_inpage_error. I tried to fix according to the instructions, but it happens more frequently now. The technical info is as follows:
STOP: 0X0000007A (0XC000000E, 0XF758C825, 0XC03DD630, 0X337F8860)
NTFS.sys - address F758C825 base at F7539000, DateStamp 48025be5
Thank you
Hello
Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.
Use the check disk command for all errors on the hard drive.
Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.
Use the drive control as follows:
1. click on start.
2. in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
3. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
4. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors if there is.NOTE: The root of the drive should be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
Warning of Chkdsk.
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
When chkdsk is finished, boot up to the desktop, and then check.You can check the link below for more details - mentioned
http://msdn.Microsoft.com/en-us/library/ms793989.aspxSee also:
http://support.Microsoft.com/KB/174630
I hope this helps. Let us know the results.
-
STOP: 0x0000007A - new large hybrid drive; no model BSOD
I put a 1 to Seagate hybrid drive in a Samsung R580 laptop and reinstalled Windows 8 House (64-bit).
I now get to chance the Kernel_Data_Inpage_Error with the following code:
STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X000000000DFE1860, 0XFFFFF6FC40006E00, 0XFFFFF88000DC0630)
Partmgr.sys address FFFFF88000DC0630 base at FFFFF88000DB2000, DateStamp 4f641bc1
Clearly, this means something, but how can I know what it means? Googling, it does not reveal anything!
I thank very you much in anticipation.
HelloDo you use a SSD? Or RAID? Double control "EVERYTHING" on the hard drive.
controller and wiring (from the discontinuation of ALL power first).
--------------------------------------------------------------------------------------------------------------Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available the onedrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
BCCode: 7A 0x0000007A
The main causes of this error are virus/malware, drivers, memory, and disk damage. And
It may even be combinations of those so meticulous control of all is needed. Possible addition
the causes are such as the motherboard damaged material errors or other materials.BCCode: 7A 0x0000007A
Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR
The KERNEL_DATA_INPAGE_ERROR bug control has a value of 0x0000007A. This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
KERNEL_DATA_INPAGE_ERROR parameters
The four parameters that are listed in the message can have three possible meanings. If the first parameter is 1, 2 or 3 and the third parameter is 0, the parameters have the following definitions.
Parameter Description 1
The type of lock which took place (1, 2 or 3)
2
The error status (usually a State of I/O code)
3
If lock Type is 1: the current process
If lock Type is 2 or 3: 0
4
The virtual address that could not be paged into memory
If the first parameter is 3 (and the third parameter is nonzero) or 4, the parameters have the following definitions.
Parameter Description 1
The lock type that was held (3 or 4)
2
The error status (typically an I/O status code)
3
The address of the InPageSupport structure
4
Failing address
Otherwise, the parameters have the following definitions.
Parameter Description 1
The address of the page table entry (PTE)
2
The error status (usually a State of I/O code)
3
The PTE contents
4
Failing address
Cause
Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:
0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.
0xC000000E or STATUS_NO_SUCH_DEVICE, indicates a hardware failure or an incorrect drive configuration. Check your cables and check the disk with the available from the manufacturer of your drive diagnostic utility. If you use old PATA (IDE) disks, this status code may indicate a bad master/subordinate drive configuration.
These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).
Another common cause of this error message is the defective material or failing RAM.
A virus infection can also cause this bug check.
Resolution
Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.
If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.
WARNING if your system partition is formatted with the FAT file system, the long line that names the windows operating system uses could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
Fix a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.
Resolve a problem RAM failure: run the diagnostics of material feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.
Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.
Make sure that the latest Windows Service Pack is installed.
If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.
Solve an infection by the virus: check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.See also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)
BCCode: 7A 0x0000007A<-- read="" this="">-->
* 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-=============================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and use scanners online and other methods.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGEAdwCleaner
http://www.bleepingcomputer.com/download/adwcleaner/
Run the malware removal tool from MicrosoftStart - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxScan online ESET
http://www.eset.com/onlinescan/Scan Kaspersky online
http://www.Kaspersky.com/virusscannerOther tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
=======================================
=======================================Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind more slowly
memory. So it is best to also exchange the rods in and out to check these even if all memory
tests fail show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor Vista/Windows 7 memory diagnostics tool
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructionsWindows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html----------------------------------------------------------------------------------------
Could be a driver related issue however less inclined than memory. Update your drivers
manually looking at system and sites of the manufacturer of the device manufacturer.References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).
This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Why this keep happening? -STOP: 0X0000007A
Sometimes my computer (running Windows 7 32 bit) will crash with a blue screen with this error code:
STOP: 0x0000007a (0x00000020, 0xC000009D, 0x86F29BDC, 0x00000000) and made a crash dump.Hello
Do you use a SSD? Or RAID? Double control "EVERYTHING" on the hard drive.
controller and wiring (from the discontinuation of ALL power first).Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
BCCode: 7A 0x0000007A
The main causes of this error are virus/malware, drivers, memory, and disk damage. And
It may even be combinations of those so meticulous control of all is needed. Possible addition
the causes are such as the motherboard damaged material errors or other materials.BCCode: 7A 0x0000007A
Cause
Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:
0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.
These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see theNtstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).
Another common cause of this error message is the defective material or failing RAM.
A virus infection can also cause this bug check.
ResolutionSolve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.
If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. RunChkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and runChkdsk/r.
Warning If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
Solve a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.
Solve a problem RAM failure: Run the hardware diagnostics feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.
Check that all the cards in the computer are properly housed. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.
Look in the Event Viewer system log for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.
Make sure that the latest Windows Service Pack is installed.
If the previous steps do not solve not the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.
Solve an infection by the virus: Search your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.
BCCode: 7A 0x0000007A<-- read="" this="">-->
* 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-=============================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is
clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
Run them in regular Windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
=======================================
=======================================Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind more slowly
memory. So it is best to also exchange the rods in and out to check these even if all memory
tests fail show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor Vista/Windows 7 memory diagnostics tool
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructionsWindows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html----------------------------------------------------------------------------------------
Could be a driver related issue however less inclined than memory. Update your drivers
manually looking at system and sites of the manufacturer of the device manufacturer.References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
original title: I get the blue screen of death & a Kernel_Stack_Inpage_Error & Stop message (0xc0000185, 0xc0000185, 0x00000000, 0x01e1600)
This sometimes happens once a day & sometimes repeatedly, he spent 2 days without crashing. I ran registry fix on that, but always seens to crash. Help
Hello
· Were there any changes made on the computer before the show?
Follow the steps from the link and check if it helps: you receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR": http://support.microsoft.com/kb/315266
-
stop 0x0000007A address 80791A5C base at 80782000 datastamp b 45, 02660
What is this error?
Hello
1. when exactly did you receive this error message?
2 did you change on your computer?
3. What is the exact error message?
Method 1:
Step 1:
I suggest you to control in safe mode and run clean boot.
Advanced, including safe mode startup options
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
Stop error message when you put a computer that is running Windows Vista or Windows Server 2008 mode hibernation: "STOP 0x000000A0," "STOP 0x0000007a" or "STOP 0 x 00000077.
-
Help to fix the blue screen error: STOP: 0x0000007A
Original title: I get the BSOD on my Dell Inspiron 14 stop information is at the bottom. What means this dose-specific code and how can I solve this problem?
STOP: 0x0000007A (0xFFFFFFFFC0000056, 0x0000000058DB3860, 0xFFFFF8A000E42A48, 0xFFFFF960001E082C) he begins again each time after it happens like nothing ever happened, but I don't want my computer any crash if there is an easy way to understand what it means and set it would be nice.
Hello
Here are some of the more general methods that could help solve the problems of use as
necessary (same as in the link below).Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
This error appears frequently as a blue screen. I have to restart the laptop.
I checked the SMART status of my hard disk with HD Tunes Pro and there is no bad sector.
I have also checked the troubleshooting page and did not find the explanation for the I/O "0XC0000056" status code
Help me to find the cause and fix? Thank you
My laptop is a Thinkpad W500
Platform: Win XP Professional
http://msdn.Microsoft.com/en-us/library/ff559197 (v = VS. 85) .aspx
Hope this helps, Gerry Cornell
-
Stop 0X000000ED (0XC0000185, 0X852C4488, 0x00000000, 0x00000000)
randomly, I got this blue screen, iv tried runing in safmode and all the other options, but it is loading windows screen for some twinks blinks then blue screen before just go to the beginning and start again.
IV tried to use the windows reinstall disk but when I told it to boot from the disc it says loading disk, then when he finishes everything turns black twinks a little later, the pointer turns upward, but that's all that I can move it, but that's all.
that all I'm basically able to do.
I want that my files than most inportaint thing, I can just reformat everything after that. I have a blacx by thermaltake exsternal hard drive dock. so I put my laptop hard drive in the dock and readers to come on the directory, but can't access my files from the disk im f, it just says: it needs to be reformatted. It is my understanding that im supost to be able to get the files because the blue screen I have is one thing start and therefor using the docking station, which must ignore directly to files. so if someone knows something about this I really really need thoes files.
Yet once the f drive comes back but I can't acsess it. It just says: the disk must be formatted to be used, should not be I could just directly pulug and opened to see my files? I can open disk E recovery but theres nithing inportaint it.
Bug Check 0xED: UNMOUNTABLE_BOOT_VOLUME
This indicates that the i/o subsystem attempted to mount the boot volume and it failed.
http://msdn.Microsoft.com/en-us/library/ff560355%28VS.85%29.aspx
0x000000ED (0X852C4488, 0 XC0000185
//
MessageId: STATUS_IO_DEVICE_ERROR
//
MessageText:
//
I/o device reported an error of e/s.
//
#define STATUS_IO_DEVICE_ERROR ((NTSTATUS) 0 xC0000185 L)Your HARD drive has errors. Check with a diagnostic tool for your HARD drive manufacturing.
Best regards
André"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
KERNEL_DATA_INPAGE_ERROR message
Recently I was away for two weeks and my system was closed all the time. My system was working fine when I left. No software or hardware has been added. Nothing has changed. When I came back, I started getting the following message with a BSOD: KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A (0xC0000185, 0 x 80572092, 0xC0402B90, 0x18F08860). I have unplugged everything except the monitor, keyboard and mouse, but the problem remains. No idea how to solve this problem?
Not without more information. Well... no good ideas.
Your system is a Compaq Presario V4440 or is it a gateway FX6803?
Are you running XP Professional SP2?
is your antivirus/antimalware currently Norton or McAfee?
Here are some ideas of an engineer of Microsoft Support previously marked as 'response' - see how these things work for you:
Step A.
Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.See the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Step B.
You need to perform a clean boot to find the program that is causing and then disable or remove.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-usStep C: make SFC scan on the computer.
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, the following line, and then press ENTER:
sfc/scannowNote: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
Please note that if the idea of the engineer of Microsoft Support for try sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.
Until 14, I'm zero dollar.
-
The code of error BSOD 0x0000007a: KERNEL_DATA_INPAGE_ERROR.
Original title: 30 + hours of chkdsk on a hard disk of 1 TB and no indication of progress
Have an ASUS PC (care not available at this time). Home work to discover has recovered from a blue screen crash. The code indicates anything a Windows software for a chip failure problem RAM or motherboard.
Decided to check the disc with recovery of bad sectors option. It has been approximately 30hrs and all I have is a blinking on-screen cursor: no indication of text on what is happening or what stage it is during the process. It's an old PC with a 1 TB hard drive. Don't know mghz speed but the processor is powerful enough to play in the COD, Skyrim and other games.
Any recommendations would be greatly appreciated. Thank you in advance.
Hello
Sorry for the late reply.
According to the newspapers of file dump, error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.
If the problem persists, try the methods provided in the link below:
Resolution in Windows 7 stop errors (blue screen) .
http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Please let us know the status of the issue so that we can help you further.
-
STOP 0x07a Lenovo3000 g430 20003
Hello, everyone.
I have laptop Lenovo3000 g430 20003.
and I have error KERNEL_DATA_INPAGE_ERROR STOP 0x07a (0xc0000185, 0x55a6b820, 0xc0487F70, 0x90feee7e).
I read that 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.
I do on laptop and cleaned contacts with wood alcohol.there are not all cables connected with the disk.
I have updated the bios to version 1.18.
Two years ago, that I changed disk.
I checked my drive on another PC and it pass SMART tests and has a few bad blocks (not much just a little bit). I used to check the disk with the program Victoria.
on official support site are not all pages use according to this model.
Now, I get lost what to do.
It seems to me that I have to change the disk controller
Can you help me with advice?I had tried a week but successfully solved.
I changed in the BIOS from AHCI to IDE disc type. And since that time there is no BSOD error.
I think the reason is bad driver in AHCI mode
-
Kernel_Data_Inpage_Error error blue screen
Original title: recently, our PC had blue screen errors
We have tried to update the BIOS, but we always get the Kernel_Data_Inpage_Error. What else can we try?
Hello
1. are you able to boot to the desktop?
2. when exactly you get this blue screen error?
When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.
For more information on the reading of the memory dump files, see the following article:
How read partial memory dump files that Windows creates for debugging
Resolution:
Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.
Use the check disk command for all errors on the hard drive.
Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.
Use the drive control as follows:
(a) click Start.
(b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
(c) type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
(d) then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.
NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
When chkdsk is finished, boot up to the desktop, and then check.You can check the link below for more details - mentioned
http://msdn.Microsoft.com/en-us/library/ms793989.aspx
Maybe you are looking for
-
I don't know if it's records after a certain period of time is there at - it a work around that.
-
Satellite U500-1E0 - how to turn off the mouse "by clicking on" noise
Please can someone tell me how to turn off the little "click" the mouse buttons do when they're depressed? Thank you.
-
HP 15-g030so: the selected boot device has failed. Press ENTER to continue
So, I got a disc error and had to go on my hard drive. After that, I was invited by a certain recovery of hp and tool that fussed around a while and rung me that he could not repair the system and some newspapers were stored. After that I tried to in
-
Routing changes? New route not respected
I changed the default GW for all members of a group. Traffic always flows, but a traceroute of the CLI has traffic going to the old router before turning in circles and be re-routed to the appropriate router. It seems that the SAN learned a particula
-
Nothing on the works of Windows 7 Home Premium
I have a Toshiba Satellite C660 and almost nothing on it works. I tried to reinstall windows, but it says "Windows could not retrieve information about the disks on this computer" I tried everything to get the disks working even launch the CD with wi