Keyboard - certain keys are not doing what they should

Similar Questions

• My fonts suddenly changed in Firefox, but not in other browsers. I solved all the duplicated fonts, cleared cache, and the settings in preferences are still on what they should be. What caused this and how can I solve this problem?

  Policies changed in the Firefox browser - not in any other browser.

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1
  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• Buttons on Smartphones Curve 8520 blackBerry answers do not or do not do what they should

  Hi all!

  My sister has a Blackberry Curve 8520 to the age of 6 months.  She dropped it in water and it no longer works.  I dried (in rice) and bought a new battery for it that the old man has failed.

  The phone works and turns on.  However, whenever it is turned on, it displays the message ' eception exception: index 3 > = 3'.  To override what I have to press on enter on the keyboard.  This shows the main screen and all the links, news etc.  The trackball or 4 keys (power, call, etc.) do not respond when I try to press ok.  They all respond when the screen goes well.

  The volume button does not work, but the button to camera but I can't leave it by pressing return.  I have to remove the battery.

  In the journal of calls by pressing the 4 buttons, from left to right, shows Jk, yi, hl b nm.  Bring down that I have to take out the battery.

  If I try to get the IMEI number after you type the #, pressing on * # turns into 'Quo '.  Pressing SHIFT + a # after U, Alt + a = Q =.

  Is it fixable somehow?

  Thank you.

  images sent by mms and email from my vacation.

• My .exe files are not open as they should after a virus removal and some do not work right.

  Here's the problem. I did a scan for viruses with AVG and deleted viruses from my computer. One of those annoying virus seems to be a program called Vista Antivirus that I had never downloaded or installed. I had a feeling that it was not good when she appeared all first. After that AVG has found to be a threat, he removed. This is where the problems started.

  After the removal of Antivirus Vista, my programs refuse to open without a right click and run as administrator. In some cases, like my WMP, the music and the Zune program, they do not work properly. Whenever I try to open a song in WMP or Zune, it won't play them or videos. Instead, as with all other programs, the 'Open with' window as if it does not recognise .exe files. So now you can see my aggravation.

  There is one more problem. After that I restart and login to my account and open the Task Manager to close unnecessary programs that I don't need or want to open, there are usually a whole list of them. However, as I did this virus removal, only a few main Basic programs that are needed to power the computer are open. Since most of those who opened before were .exe files, I can see where is the problem.

  Honestly, I'm stuck for what to do to solve this problem. I'll do a system restore and see if it works (and I hope it will be). If this isn't the case, I need little help and instructions to fix this annoying problem.

  Thank you for taking the time to read this and help out me.

  -iggy

  Edit: System Restore has been a success. Is there anyway I can stop this from happening in the future?

  Hi ignite444,

  Glad to hear that the problem is solved!

  Unwanted programs or virus downloaded on the computer without the user's knowledge.

  Important Antivirus software must be updated regularly to stay effective against new viruses. Most of the antivirus software are designed to update automatically, but you can also update your software manually.
  You should also keep during the virus scan regularly.

  Update your anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-your-antivirus-software

  check the link below for the number of Windows vista-compatible antivirus software.
  Windows Vista consumer security software providers
  http://www.Microsoft.com/Windows/antivirus-partners/Windows-Vista.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Some keys on my keyboard do not work as they should

  Original title: Hello

  
  

  I use windows vista in my laptop is L G e som are not working keys keys 7 8 9 p and BACKSPACE keys are not working this time I use on screen keyboard

  Hi AyaanNadeem,

  Have you made any changes to the computer before the show took place?

  Method 1
  I suggest you to connect different keyboard and verify whether these keys work.

  Method 2
  Try to update the drivers for the keyboard from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• FN keys are not displayed on-screen Portege Z30T-A

  I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5

  It is pre installed Win7 and I upgraded to:
  OS Microsoft Windows Version 8.1 Pro 6.3.9600 with their CDs.

  The problem is that the FN keys are not displayed on the screen.
  When I got my laptop under Win7 I would press the FN key and options would appear on my screen, it was great. But after a day, it does not display anything on the screen.

  How can I solve this problem?

  Post edited by: djemo

  Hello

  At first, I must say that the described issue is not a problem.
  Under Win8.1 Toshiba offered the use FN keys in two modes:
  -Special mode of operation
  -Mode of F1 - F12 standard.

  If you use open Win8.1 Please help Desktop > tools & utilities > system settings > keyboard.

  Here you can change the mode of function keys.

  Please test its operation.

• Satellite L50-B-127 - some keys are not working and touchpad blocks constantly

  Before leave here an apology because I'm Portuguese and my English level is very low.

  My computer is a Toshiba Satellite L50 B 127

  Lately, I noticed some anomalies which appeared me on my computer (which should take about a year). When I speak of anomalies refer to the keys you use rarely, and at this stage do not work (example: arrow left, Z,...)
  Not to mention that I noticed that my touchpad is constantly blocking, that is to say after the buttons to work, the cursor does not move, being sometimes more than 20 seconds to wait for the cursor to return to normal.

  If anyone has had this problem or knows the cause and the solution? Recognizing a response as soon as possible

  Hello everyone, I'm here to post my problem that has caused me a lot of problems and troubles and especially apologize because that throughout this text should meet several errors since my English level is low

  My computer is a toshiba satellite L50 B 127 and has a little more than a year of use

  Lately, I found some anomalies in my computer including some keys from one day to the other crashed, these keys are not widely used (arrow to the left, z, dash). In addition, my touchpad has been constantly block of minutes in minutes, even if the buttons on the touchpad still work, the truth is that the block cursor for a few seconds and then comes back to work as if nothing had happened. In 10 minutes, however this situation occurred four times

  I would be grateful if someone knew the reason why this happens or even the solution to answer me as soon as possible

• Soft keys are not visible on Simulator

  Soft keys are not visible on BB10 Simulator by clicking on textfield. It will be visible on real device

  You use the resolution of 720 x 720 in the Simulator? There are no virtual keyboard as the device has a physical keyboard. You can use your keyboard to office as input.

  To test the virtual keyboard, make sure that you start the Simulator in the fulltouch option 1280 x 768. This option is visible during the initial start of Simulator.

  Thank you

• Boot Camp keyboard and trackpad will not work. They do in Fusion

  Hello

  I have a problem with my VM ware / boot camp of activation. I have a Boot Camp partition on my Macbook Pro. I am able to boot the disc using the fusion, but when I try to use Boot Camp coming to the windows activation screen and my keyboard and mouse do not work so I can't press the button to continue. I tried to boot into safe mode on boot camp and the keyboard and mouse are not recognized either. I tried to plug in a keyboard and a USB mouse generic and is not no longer works. I am running XP pro (not OEM version).

  Does anyone have any suggestions on a cure?

  Hi tsugua,

  This sounds like it may be more than one Apple, or Microsoft problem. However, my recommendation would be to ensure that the leopard drivers have been properly installed. To install the insert drivers your Leopard installation disc and run the setup.exe if is not autorun. So, make sure you run software updates of the Mac OS to ensure you have the latest version of the Bootcamp drivers.

  Let me know if this helps.

  Eric

• When I change bookmarks and close firefox and open upward once again changes to my favorites are returned to what they were before, I changed them?

  When I change my favorites and the close firefox and the open upward once again changes to my favorites are returned to what they were before, I changed them?

  Try the solutions in Impossible to add, edit, or save bookmarks - how to fix

• I get this message your Skype name and password are not recognized what should I do

  original title: Skype
  I get this message your Skype name and password are not recognized what should I do

  Look at the Sticky Thread at the top of this page.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/where-do-i-get-Skype-support/3ae98b5e-566c-4D8C-B189-37b50e475539

• I use Photoshop CS5 ver.12.1. Photos I take in Camera Raw with my Canon 60 d are viewable, but those taken with my Canon 70 d are not. What can I do to be able to view Camera Raw photos taken with both cameras?

  Question:

  I use Photoshop CS5 version 12.1.  Photos I take in Camera Raw with my Canon 60 d are visible and can be worked, but those taken with my Canon 70 d are not. What can I do to be able to view and work on Camera Raw photos taken with both cameras? Y at - it a plug-in that I can use that will allow me to display and work on photos of 70 d and my photos of the 60 d? Helpful suggestions are appreciated.

  The 70 d has not supported until the Camera Raw version 8.2:

  Devices supported by Adobe Camera Raw

  PS Camera Raw versions of CS5 ended with 6.7:

  Camera Raw plugin and Adobe application compatibility

  You have two options: upgrade to at least Photoshop CC or CS6 or get the free DNG Converter to convert your RAWs 70 d DNG for use in CS5. The last option will always require an additional step.

  Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC

• Components in each canvas are not initialized until they appear

  I have a bar of toggle buttons that each rocker selects a different canvas that contains different components. However, the components of each of the paintings are not initialized until they appear when you click on their respective button.
  
  Is there a way around this?

  where do you keep these canvases. inside a browser or view tab battery?
  in any case, just do the creationPolicy = "all" for the parent of your paintings.
  then they will be initialized until they appear.

• Why aren't my indesign notes linking as they should?

  Why aren't my indesign notes linking as they should? :-(

  m.

  You really give much more information about your workflow. How you produced the endnotes and anything that can help us help you.

  Screenshots are a treat too.

• Microsoft Natural 4000 ergonomic keyboard with IntelliType 8.15 64-bit for Windows 7, some keys are not function (new, open, undo, redo, fence, etc.) in Office 2010

  Hello MSFT sensi.
  I need help. I have the Microsoft Natural ergonomic 4000 keyboard with IntelliType 8.15 64-bit for Windows 7 installed. I run on a brand new i7 with 9 GB of ram and 1 TB of hard drive.  I just installed Office 2010.  Have you tested this keayboard with Office 2010?

  I bought and returned 2 of these keyboards at my local dealer and two keyboards have the same problem. Preconfigured keys (help, undo, redo, new, open, close, reply, fwd, send, spell, save and print) F1 - F12 do function not all as they are indicated in MS Word 2010 etc. I was able to program my favorites 1-5 with little problem.

  I did the following to try to resolve the problem:
  1. research of virus (clean)
  2. uninstalled the driver and downloaded the last strand 8.15 64
  3 entered the keyboard layout configuration and reset the default settings
  4 tried to manually program the F1 - F12 function keys

  NONE of these things solve the problem.  Which brings me to the conclusion that this keyboard does not have to be 100% compatible with Office 2010.

  Any suggestions / feature of configuration problems feature keys?

  PS. No, I didn't record this keyboard, because is it not there no solution - he goes back to the retailer.

  To the right of the function keys, there is a key LOCK.

  Toggle this button to toggle between the keys F1 to F12 with their usual function and the functions listed in the relevant programs.