keyboard changed on its own!

Similar Questions

• R7000 can't access admin page and IP DHCP address range changed on its own

  I noticed recently that my IP range internal from 192.168.1. * to 10.0.1 on its own. I think I got the router configured to auto update to new firmware, so I think that it updated itself and change its settings. When I try to access the admin page that nothing loads. I tried 10.0.1.1 and 192.168.1.1 and nothing comes up. I was wondering if anyone else has had this problem recently. I will be eventually provided to the factory settings and set it back up like that, but I'm hoping to exhaust my options before you go this route. Any ideas?

  I was able to determine the cause. He I warned when you say IP changes when there is a second device with DHCP. I noticed there was some new computers on my network when I watched the network file share. I use the Netgear Powerline device to do wired connections to my living room. What I think has happened is that my recently developed neighbouring apartment unit in place the internet and also uses a feature of current line. I noticed that my DNS suffix changed to a different address, which is the ISP instead of my router. I put 2 and 2 together and realized that my network was overlaps sound via the Powerline. I have never set up an encryption key on the Powerline online so it was still using the default settings and connecting to my neighbors by current carrier. When I added the encryption key, the problem disappeared and my network returned to normal. Next time I should follow the instructions when setting up new network equipment. Oops

• Infected w/Spyware, etc? Keyboard typing on its own.

  Hello everyone, I am new to this site and a novice in computer science. Lately my computer makes a beep when you tap email, Word or even search engines. Once it beeps, the keyboard no longer work more, or more often it starts to type many characters on its own. Very frustrating and I am at a loss of how to get rid of it, but also how it could have been infected in the first place. I ran ComboFix first and can provide a newspaper if need-be. Any help would be greatly appreciated. Thanks in advance.

  In addition, I ran MalwareBytes before and here were the two topics with which he kept coming:

  HKEY_CLASSES_ROOT\scrfile\shell\open\command\ (Default)
  HKEY_CLASSES_ROOT\regfile\shell\open\command\ (Default)

  This sound signal as being due to the blocking of the system or frost and it's sound motherboard. What I think, is that while you type a reason any PC cling and stop working and you might not notice and you pressing the keyboard or press the key on the keyboard to solve the problem and when it released to hang it then wrote to evertything you have entered but doesn't not visible here.

  I suggest to check the update and make sure that everything is updated and you have the latest Service Pack for Windows.

  Also, you can try running:

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  to see what is happening.

• Security setting Internet properties continues to change on its own / CPU of the computer goes Haywire / 15 + Instances of dllhost.exe * 32 Com substitutes

  I have seen that this is a problem for more than just me by reading online about this.

  See:

  http://www.bleepingcomputer.com/forums/t/554044/slow-Internet-IE-security-settings-keep-changing/

  http://community.Norton.com/forums/trojanpoweliks-multiple-dllhostexe-32-processes-and-PowerShell-Windows-7

  I need the solution and you can't find it.

  Most of the places online say download all these other programs but never say what is really happening.

  I hope you guys can help.

  Windows 7 Home Premium PC

  THAT IS TO SAY 11

  I did add something new to my pc.  It started randomly happening...

  What I've noticed, is my computer will be stronger, as it is to wrap upward and the CPU goes crazy.

  After that research around these things, I noticed happen when this noise starts and the CPU going nuts:

  -Under Internet Security my settings changed on their own to custom

  (I then change them back only to have this all happen again minutes later)

  -When this is happening and I'm going under dllhost.exe Task Manager suddenly over 15 years * 32 Com alternatives pop up all at the same time

  I do stop by changing my Internet Security properties to default and putting an end to the tree of processes all the dllhost.exe * 32 Com substitutes.

  Then, about 5 or 10 minutes later it happens again. This has happened in recent days.  I ran safely scan and it found some VirToolWin32 - CeeInject.gen! KK (linked in Adobe Updater). This VirTool:MSIL/injector.BF has been removed but all that I mentioned above is still ongoing.

  I have apprecitate your answer. Thank you

  It arrived today.  I checked the updates as soon as I logged in and it was so maybe that fixed the issue.

  Update definition for Microsoft Security Essentials - KB2310138 (definition of 1.187.1412.0)

  I'll keep the links you posted and use them to check everything. I am running the Microsoft Safety Scanner again now, I ran it yesterday and he did not find anything.

  Another weird thing, all my update history disappeared. It says updated, ever. Now it only shows the update one alone that I did when I opened a session today.

• router password changed on its own

  Some days, my internet router is spent most of my links router devices and when I enter my password now it says it is incorrect.  I wrote when I created it a password.  I only had a few months to this router.  How could this have happened?  now, I have several devices in my house that cannot access wifi.

  has anyone had this happen? How did you solve this problem?

  Thank you

  @tilogarcia Hi! It is possible someone changed the password of your router wireless. What is the model number of your router? You can try to reset the router and reconfigure again. To reset the router, just hold down the button reset for 20 seconds. Make sure you update the firmware on the router to its latest version.

• Make sure the brightness stays where I want it to be instead of him change on its own

  Why the brightness does not change where I put it to be? The laptop is not connected to the power I've set up my own custom plan and tried to use the power saver option but the brightness changin dungeons have his own and becomes clearer...

  Hi BigBoyLopez,

  When this happens? This occurs when the computer wakes up from a sleep state

  You can follow the steps mentioned in the link below

  The display brightness may change when the computer comes out of standby on a Windows Vista-based computer state

  http://support.Microsoft.com/kb/929249

  You can check with the manufacturer of laptop computer for known problems

  Thank you, and in what concerns:

  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• keyboard typing on its own

  whenever I have leave my computer idle for about 1 minute and then start to move the mouse or type something a row of letter 'q' is written in the box as if its holding down, or if there is no zone I hear beep from the windows by default.  everything first this thing was going to last for 1 second, but now it lasts 10 seconds with that repetition annoying beep, I use programs like ccleaner and speed up my PC to clean and fix PC problems, so I don't know if this is due to some system files or the registry I deleted by mistake, I did a full scan by McAfee , but nothing showed up, also controlled for update my drivers, I even unplugged the USB receiver for my keyboard and wireless mouse but still this thing continues to be on!

  Hmm - another problem with the letter 'q' in two days. Here's what I did the last time.
  See how you go.

  It may be a virus/malware or the key-logger/hijacker.  Have you run a scan time of full boot with your anti-virus?
  If who does not find anything, download MalwareBytes to make sure the cross
  (turn off your regular AV before running the scan with Malwarebytes as have two at the same time may cause conflicts).

  Malwarebytes: Download free anti-malware

  Take a look at your list of startup programs to see if there is something with Windows launch
  that looks suspicious (type msconfig in the Run Start command menu or the search bar for)
  Open the System Configuration). If necessary to disable it and try to find its location if you can uninstall/remove it.

  Also avoid connecting them secure sites until you check if your device has been hijacked.

  .

• Cliq 2.1, 2.0.13, 2.0.17: Cliq ringtone continues to change of its own accord...

  I noticed that my Cliq continues to change ringtones, even if I already have a game. It doesn't matter what ringtone I change it for her jumps back between the default and I chose the one guard. All this experience?

  Update:

  Today, my Cliq, started with the issue of the ring again. I don't know what the cause of the problem or why. The last time I had to format my Sd Card and re add all returned using the motorola media link. I hope I don't have to do it again because it's a slight pain whenever there is an update. Any suggestions?

  Post edited by: heavenleigh87

  
  

• My screen resolution changed on its own

  I change user (Windows Vista Home Edition) when the resolution passes just by himself from 1920 x 1200 to 800 x 600.  1920 x 1200 is my largest resolution available and it has been defined for both users and works beautifully for over a year.  Now, when I go to display settings, I can change to any EXCEPT 1920 x 1200 resolution.  If I select 1920 x 1200, it sets everything to 800 x 600.  Help, please! Thank you.

  1 reinstall the video drivers. See the end of this post to find out how to get them.

  2. If video drivers reinstall it does not work then probably video hardware is a failure. Exchange on a map of well-known work test.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• HP p2-1334: p2-1334 HP goes off instead of hibernating, changed on its own

  I forgot to include my OP

  This article may help. Please let me know.

• Re: Satellite L850 changes display on its own

  Hello everyone,

  My problem is that my laptop changes between project options on its own.
  Project options = when you press F4, you see.
  It's really annoying because I can't work when it does 6 - 12 times per minute.

  THX Grini

  To be honest I never heard of something like that.
  What you can try is to enter the BIOS settings and set it to default settings.

  By the way: how old is your laptop? Since when did you notice this behavior?

• Keyboard has its own life!

  I have a brand new T410i.     Running Windows 7.    I got it for a few days.   A couple of times already they keyboard has just gone 'crazy' on me.    I'll be typing away and then the cursor moves to the right, text will erase as I type it.  It happened when I was browsing the web and it will click links on its own... or if I do a Google search, search to return results once it will just open one of the links... The pointer will be difficult to control.    The only thing that fixes it is when I stop and restart Windows.    No rhyme or reason as to what triggers it.   My laptop was on during a few hours today and then he began to act up.    Any ideas?   I checked the drivers and according to Windows, it uses more updated drivers.

  
  

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe

• Why Acrobat does change the parameters in the bookmarks and links on its own?

  Hello everyone ,

  In the last weeks I met a problem that seems to be a bug.

  I used the functions of many times before without encountering this problem.

  The problem is: Acrobat seems to change my settings of bookmarks and links on its own.

  
  

  
  

  That's what I do:
  

  A Word document is converted to pdf using Acrobat / save as pdf.

  Then I open the document in Adobe Acrobat format and make some additional adjustments on how are treated bookmarks, and how pages are displayed.

  For this, I use the menu: file / properties... where I in initial view choose to display bookmarks menu and an entire page.

  Links: for each link, I have activelly chose page to link to and I have this than a whole page to be shown.
  

  But something strange seems to happen to my favorite (and links). Even if I manually change each single bookmark properties (by right-clicking on the bookmark and then change properties), the Acrobat seems to change my settings in "Execute JavaScript", after which pages in my document do not appear as whole pages; Instead, the view is expanded. Often Adobe (and the reader, I tested both) show the zoomed pages so that they fit the frame of the window open.

  What is the problem here? What I am doing wrong?

  This would be a strange bug? Or is there a setting that I happened to change without knowing?

  I have a similar problem with links. Even though I actively chose a particular magnification of the linked page, the program changes the settings on its own. Rather than show a whole page, Acrobat (and subsequently Reader) are suitable for the page on the frame.

  What is the problem here? What can I do to ensure that my personal settings are retained?

  Sorry for my English. I use the Swedish version of the program, so I am only guessing what are the different options are called in English.

  
  

  Greetings from Scandinavia,

  LM

  
  

  I can change the properties of the bookmark without any problem:

  

  

  

  

• on-screen keyboard change language by itself

  My wife speaks Russian and should be able to type Russian for emails.

  I installed the screen keyboard on and the Russian language pack. It works fine except that most of the time you go online or change a Web page, everything you type to the real keyboard, not the Russian keyboard to screen on TAPE instead of English. I am constantly go to the taskbar and back to English. Next time I'll type something that she herself changed back to the Russia on its own.
  I want only the screen keyboard to type Russian, not the real keyboard, and the taskbar should not change language on its own. What's up with that?

  Hi Hobbit107,

  You can follow this link & check if the problem persists:

  Change your keyboard type

  Hope the helps of information.