Keyboard problems after install "Microsoft Keyboard Layout Creator"

Similar Questions

• Created using Microsoft keyboard layout creator of keyboard, but after installation does not display the name of my keyboard on language bar on the taskbar

  I created my keyboard with "Microsoft keyboard layout creator v.14" and I create the package. It works fine but does not display the name of my keyboard on the language bar on the taskbar

  Hello

  Follow these steps and check if that helps.

  (a) click Start and type area and the language in the search bar and press to enter.

  (b) go to keyboards and languages tab.

  (c) click on change keyboards.

  (d) now, click Add.

  (e) now under any input language, you have chosen who find and choose keyboard.

  (f) ensure that all options are listed.

  (g) if there is a check mark in the United States remove it and place a check next to the language and click Ok.

  (h) now you can check cross if the preview shows you the correct layout.

• Microsoft Keyboard Layout Creator on Windows 7 Setup error

  I'm having a problem to install the .dll file that gives the creator of page layout

  It gives me the error
  
  
  the installer was interrupted before in the United States (custom) can be installed. You must restart the installer to try again.
  I've searched around, but the only solution people had had to turn on IIS 6 compatibility, but that has not worked
  Since I was the. DLL file couldn't I just put in a directory?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to your description, I understand that you can not install Microsoft Keyboard Layout creator and you get an error message about the corruption of .dll files.

  Where you download it go?

  Please see the link below:

  http://msdn.Microsoft.com/en-us/goglobal/bb964665.aspx

   Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Satellite A100: Empty white sign Microsoft Vista watch keyboard layout creator

  Hello

  I installed the Microsoft Keyboard layout creator on my new laptop A100. When I opened it, the workspace of the program shows an empty white page only. I started it more than once, restarted the computer, but it doesn't help.

  What can I do?

  Best regards
  Bernd

  Hello

  I agree with the darkmatterman.
  The old version of Microsoft Keyboard Layout Creator (version 1.3) will work on all platforms of pre-Vista and requires version 1.0 or 1.1 of the .NET Framework.

  But the most recent must Microsoft .NET Framework v2. If you have not already installed you can do so from this place:
  http://msdn2.Microsoft.com/en-us/netframework/aa731542.aspx

• With the help of Microsoft Keyboard Layout Creator 1.4 (last) and need Numpad

  So I'm on Windows 7, using a Vostro 3446 with no paved hard dog digital, dedicated numeric keypad or NUMPAD FN (FN/UIO-JKL, like on a Dell D800).

  I found this program, but I'm wondering 2 things

  -I want to use the keys FN + Key or icon + Windows key

  -I want to be able to use all functions on numeric keypad, I do not have (I have PgDn, PgUp, Home, End) which are Num0-9, NumLock to add, subtract, divide and multiple are not necessary, but if I would be good

  -Would I any Type in "NUM1", 'NUM2', etc. or Ref. as "VK_OEM_102" in the pop-up window, and if this number is therefore NUM0-9

  So far the format ' NUM ',?? (The number) and the "VK_NUMPAD?" format does not work

  Are these it (I had to IsKeyPressed - GECK) cause during the test, there was insert 'NUM0-9' not the real number (let me try hexadecimal)

  0 X 47 71 NUM7
  0 48 72 NUM8 X
  0 X 49 73 NUM9
  0X4A 74 NUM-
  0X4B 75 NUM4
  0X4C 76 NUM5
  0X4D 77 NUM6
  0X4E NUM 78 +.
  0X4F 79 NUM1
  0 50 80 NUM2 X
  0 51 81 NUM3 X
  0 52 82 NUM0 X
  53 83 NUM 0 X.

  Or are these he (http://www.kbdedit.com/manual/low_level_vk_list.html) cause VK_NUMPAD0-9 do not work due to the limit of 4 characters

  VK_NUMPAD0	0 x 60	NUMPAD 0
  VK_NUMPAD1	0x61	NUMPAD 1
  VK_NUMPAD2	0 x 62	NUMPAD 2
  VK_NUMPAD3	0 x 63	NUMPAD 3
  VK_NUMPAD4	0 x 64	Numeric keypad 4
  VK_NUMPAD5	0 x 65	NUMPAD 5
  VK_NUMPAD6	0 x 66	Numeric keypad 6
  VK_NUMPAD7	0 x 67	Numeric keypad 7
  VK_NUMPAD8	0 x 68	Numeric keypad 8
  VK_NUMPAD9	0 x 69	Numeric keypad 9

  VK_NUMLOCK

  0 X 90

  Numlock

  It is anyway they would update the program or y at - it a way to specifically tell the application to use the numeric keypad as how Microsoft Office uses special characters to search & replace "Enter/Return".

  I think that's what I should ask what is the Point of Code for the keypad (as Google thinks I'm looking for special characters)?

  Help > code point - a digital reference in a coding. In Windows, this is usually the numeric Unicode character value. Microsoft Keyboard Layout Creator can accept Unicode code points like "U + # ' or '\x###' values.

  According to the program 4, NUM4 and 0 x 64 are all the 4 is 4 and Numpad 4 the same cause I use a mod that needs NUM4 and does not meet the 4

  Hello
  Welcome to the Microsoft community. Sorry for the delay in responding.
  Please take a look at this article and check if that helps.

  The Microsoft Keyboard Layout Creator

  Keyboard Layout Creator 1.4

  You can also post your request here for better assistance.

• Satellite L300 - MSKLC1.4 keyboard layout creator does not work properly

  Hello

  I installed the MS MSKLC 1.4 tool. on Toshiba Satellite L300 and Vista32. This tool is to generate a clean keyboard layout.

  I wanted to implement Gujarati signs for a friend. To do this, we put signs and letters on three 'levels' in this keyboard layout:

  1 Standart "a, b".
  2. pass the speeds as "A B"
  3 Altgr + key

  The first two levels with letters not run very well, but the last of them.

  We have tested in Open Office 3.1 and MS Works Word. The two programs do not accept Altgr + key letter.
  Open Office has no special function keys altgr +.

  In an editor that comes with MSKLC 1.4, level 3 also works very well. NO problem here!

  How this can happen? What should I do?

  Jens

  MSKLC 1.4. is available:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8be579aa-780D-4253-9e0a-e17e51db2223&displaylang=en#overview

  > On a German-Toshiba A50 with XP.
  > THREE States appear Gujarati letters.

  To be honest I never tried to MSKLC1.4 keyboard layout creator but I n t think that it s a question of Toshiba.
  I think that it s related to the UK keyboard layout because he of working with available German (as you suggested).

  My personal suggestion could change the layout of the UK keyboard for the German language in Control Panel-> regional options & language control

  Check if this help

• MS Keyboard Layout Creator 1.4 construction installation package error

  I installed Microsoft Keyboard Layout Creator 1.4 on my real

  Windows 7 Home Premium x 64 SP1, then created my own layout changed RUSSIAN, then go to 'PROJECT' > 'DLL BUILD AND PACKAGE INSTALLATION. It checks it, looks like no problems or errors, bit at the end it says:

  CL. EXE returned 1
  

  
  

  RC. EXE returned 1
  

  
  

  LINK. EXE returned 1

  
  

  How can I SOLVE this problem?

  In fact I tried on Win XP SP3 x 86 and Windows 7 Ultimate x 86 - the same problem :(

  Hi Aziz,.

  I suggest you to follow the steps and check if it helps.

  Method 1: Check out the link below and check if it helps.

  http://msdn.Microsoft.com/en-us/goglobal/bb964665

  Method 2: Reinstall and install as administrator and check if it helps.

  (a) right click on the program you want to install as an administrator.

  (b) click on run as administrator.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• Satellite A205-S5804 - after installing Microsoft sync, it does not start

  Hello

  This model uses by me. I downloaded it from Vista to XP.

  After installing Microsoft Sync, you need to restart and my laptop does not start after that. HD is indicated and known on the BIOS.

  Any help please?
  BR

  Hello

  > After installing Microsoft Sync it requires a reboot and after that my laptop does not start.
  And it does n average boot t?
  You get an error message? The laptop freezes on start up? Do you get a BSOD?

  I put t know how you can solve this problem, but can you go into the advanced boot menu? You can start in safe mode?

  In my opinion Microsoft installation synchronization destroyed something in Windows and in the worst case, reinstall the whole OS.
  :(

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena

• Hi I have a problem after installing my CS6.  He repeats to me that msvcr100.dll was not found

  Hi I have a problem after installing my CS6.  He keeps saying that msvcr100.dll was not found?

  Download the runtime MSVC 2010 from Microsoft and install it.

  Mylenium

• Activate a medium custom keyboard Microsoft keyboard layout creator 1.4

  Hello

  I'm trying to creat a custom keyboard to place the letters where I want that they in a farsi/Persian keyboard.

  After days of searching I creative cam of microsoft keyboard layout 1.4 I have installed this and created the layout I want. I was also told that to do this I need Microsoft .NET Framework 2.0, which I also installed.

  the only problem is that I can't get this new keyboard that I did with the creator of with other keyboards keyboard layout in the language of the control panel settings.

  Hi wiseman3,

  Please see this link with some useful information and links:

  http://msdn.Microsoft.com/en-us/goglobal/bb964665.aspx

  If you need additional support, thanks for posting questions here:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• keyboard layout creator version 1.4.6000.2 corrupt description

  In the project properties, I put the Description. When it installs, in the list of installed applications, the description is as I put it. But when I put them to the top of the list of keyboards after the installation of the keyboard, it uses an old name.

  I created the keyboard 'save the source as a file.

  I tried this several times. I tried to install it on another computer fresh, but corruption seems to be in the .klc file

  Someone knows how to 'corrupt' this file so that it uses the descirption as a description?

  Well, I don't know how to PROPELY solve this problem. By that I mean, so if I change the file with the creator of keyboard layout, it will update the description.

  But I found that I can open the file with Notepad, copy the description of the top of the file and replace the copy "corrupted" next to 409 downstairs with good, then when I compile it it works fine.

  I assume that if I change it in the program in the future, I'll still have to go and edit the file .klc with notepad - but at least I * can * so I'm not stuck anymore.