KeyboardDrake: changing the type of menu overview af: panelCollection

Similar Questions

• Need ip vm info to change the type of network adapter

  Hello

  I need to change the type of network adapter on the virtual machines, but to do this I will need to get all relevant intellectual property information. This is because the server returns to DHCP afer restart, after the change of the NIC with the command below. I've seen various commands, but the simplest works only with 32-bit powercli which I did not present (or what I want). Does anyone do this?

  Thank you

  Get - vm servername | get-networkadapter | set-networkadapter -type 'Vmxnet3' -confirm:$false

  PowerGui FAQ.

  Q: how to start the administration Console in 32-bit mode on a 64 bit system?

  When you first install PowerGUI, on the last page of the installation there is an option to open the administration Console.  This option will open the default version of the administration Console.  The default version is 64-bit on 64-bit computers, or the 32-bit version on 32-bit computers.  Actually, on computers 32 bit, there is only one version, 32-bit version.  The PowerPacks to use a feature that is only available in mode 32 bits, so you can open the administration Console in this mode to use these PowerPacks.  To do this, you have a few options:

  1. from the start menu, open the programs PowerGUI, then x 86 folders and click the shortcut of PowerGUI x 86 to open the Management Console in 32-bit mode.

  2. in PowerShell, run the following command: & ${env:ProgramFiles(x86)} \PowerGUI\AdminConsole_x86.exe }

  3. in cmd.exe, run the following command: "% programfiles(x86) \PowerGUI\AdminConsole_x86.exe"

  Note that you can have only one instance of the Console of administration open at a time, so if you have already opened the Management Console in 64-bit mode, you need to close this window before you open the Management Console in 32-bit mode.  Also note that you may need to wait a few seconds after closing the window of the Management Console for the process to stop completely, how you can re - open it in 32-bit mode.

• change the type of legend

  I'm a captivate user in training.
  My settings created text captions, legends of suspicion (overview) and legends of failure when I recorded my video training, which has been authorized. I was tasked to remove text captions, but the legends of suspicion. Suspicion of legends seem to be the same as the legends of overview and I do not want to display on a roll - I want that they on the slide, most of the time. Is there a way to change the caption type without having to create all new? Better yet, is it possible to change the type of all the captions at the same time?
  Legend properties do not appear to offer this option, but I hope that maybe there's somewhere that I haven't looked.

  Hi klhdv

  Types of legend fall into a few different categories.

  * Standard text captions
  * Your comments legends
  * Rollover captions

  While you should be able to change all of a type of category to a different type in the same category, you can not change them in several categories. For example, if you use blue Adobe for a Standard text caption and you want ALL your Standard text captions to be blue Adobe, you can use the "Apply to all" feature you see on the legend dialog box to accomplish it. But if you also want to change the captions of all the "success" to be blue, Adobe, you would have to change among the legends of success, make the change, and then use them apply to all features.

  Yes, I know them apply to all features has a field where it says "any type of legend", but in my experience, this does not work most of the time for this.

  Here is the difference between a legend of suspicion and a caption simple flipping. A legend of suspicion is associated with a button object, click box or text entry area. It appears by positioning the mouse on these objects to provide a 'hint' that something can be done. With a standard typical bearing legend, you simply set an area where you want the user to hover over and Show legend by positioning the mouse over the area. The big difference here is that the ancient artifacts, they are interactive. Normally, the user must do something with them. Click or type the text. And with the latter, they simply have the mouse on and read.

  A bit more about changing the type of legend. There is no installation that I am aware of that you can use inside Captivate maybe right click on a legend of feedback and to choose to convert it to a standard legend text or a caption reversal.

  I hope this has been helpful for you... Rick

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Change the type of sensor pressure strain for SCXI-1314

  Hello!

  I would like to ask how to change the type of strain sensor.

  I use SCXI-1314 and one of my pressure sensor is a type of 4-wire. (Output 100mV, excitement: 10vdc)

  , but I want to replace the sensor by another type of current output type. (Output 4 ~ 20mV, excitement: 12-30Vdc)

  I checked the output voltage cable 4. (Defined as full-bridge OR max)

  Power + = Ex +.

  Food - = Ex-

  CH+        =  S+

  CH-         =  S-

  However, I don't know how to connect the type 2-wire with SCXI-1314.

  In addition, I don't have enough experience on the types of bridge (bridges and whole, quarter half)

  Can you explain what I need to do?

  One thing you migth try is to put a 5 Ohm resistor in the current loop. causing a drop in voltage 100mV on resistance, however check the soil conditions.  Since you will need a new calculation of sensitivty sensor anyway you can use a resistor 4.7 Ohm or 2 10 ohms in parallel... just find a good match between your 1314 input voltage range and the 4-20mA.

  And you will have an external power supply for the sensor.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• How can I change the "right click" menu for a table control?

  Hello

  How can I change the "right-click menu" of a table control. I would like to be able to remove the ability to add or remove columns and maybe more selections. I want to keep the possibility of

  Add or remove lines

  Right-click on your table.  Then go to advanced-> DURATION Shortcut Menu-> Edit.

• Change the type of serial number of UUT

  Hello

  I am a new user of Teststand and I would like to change the type of serial number to USE.

  or add condition number of the operator to write in the information of the object to measure dialog box.

  I want the serial number that have just number 20 and no letters.

  If the serial number is different, the dialog box should reappear as at the beginning.

  Hope that I was clear.

  Thank you

  You will need to replace the PreUUT callback and then build some sort of algorithm to verify the serial number desired.

  I've attached an example of how do.

• Update of cases in the structure of the case after having changed the 'Type of case.

  Hello

  After you change the "Type of business" (only one case has been deleted), I discovered that in cases of strcuture cases has become "damaged": case "named" have been changed to digital small (that is, 0, 1, 2, 3).

  Is there a way to den strcuture case?

  Thank you

  Pavel

  

  Right click on one of the enums greyed out and choose 'review and update of Type Def.  That should allow you to solve problems.

• How to change the type of insurance policy indicator on front panel

  Hello

  I want to change the type of digital indicator police led style. I have the police. But, how can I change the type of indicator of independent policy and not only not by changing the type of policy application. I checked the property node available are only color, size, justification, but type.

  Yoppy.

  Go

   

  LED > right mouse click > Create > property Node > Label > police > name

   

  then use (or)

   

  Digital > right mouse click > Create > property Node > digital text > police > name

  Kind regards.

   

• Change the Type of Interpolation of waveform graphic part

  Hello dear colleagues,

  How can I change the type of interpolation to a graph of waveform in part? Check the attached photo.

  I don't want yellow interpolation to the beginning of the measure.

  I know that the interpolation can be modified with the property node, but this has an influence on all points.

  Any idea?

  Thank you very much.

  

  Hi maximint,

  -NaN values used to hide unwanted in the plot points

  -use separate plots when you do not want the "edges" in land line

• How can I change the type of chassis in an existing CompactRIO project?

  Hello

  I have a built in LabView 8.2 for a chassis 9101 cRIO. Now, I want to bring to LabView 2009 and use it on a chassis of 9104. I would have thought this should be simple, but there is a VI on the FPGA itself. When you compile, I get the error "the device type that has been set up in this function does not match the actual type of the device. I don't want to have to remove the frame of the project & add it back (losing all the settings it can have) - is there a way just to change the type of target, but keeping the relevant parameters?

  Thanks for any help!

  Dave

  Hi Dave,.

  Once you've practiced it several times it is actually a piece of cake.

  Right click on the project select new target or device

  Rember just to specify rather than the current goal.

  Otherwise, you will have a conflict.

  The new target is initialized to the Ip (0,0,0,0) then re address assignment standard.

  Copy (drag) all the components for the new device (RT & FPGA if included)

  Note it's manual labor rather than you have to 'say' labview what material he must understand!

  concerning

  Xseadog

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• Change the type of user account is not updated

  I changed my account type standard user principal and account invited to administrative yesterday. Now, I want to change it back but is not allow me to change my primary administrative standard. I can click on it, but it is not updated. What should I do to not having guest account my administrative account?

  Hello

  You receive an error message or code everything by trying to change the type of account?

  Note: Guest account cannot be defined as administrative account. There the option only to turn on or off.

  Reference: Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  If there is an another account on your computer, and then log on to the administrative account and then try to change the account type.

  Method 1: Activate the default Administrator account, and then try to change the type of account and check if it helps:

  Enable and disable the built-in Administrator account

  http://TechNet.Microsoft.com/en-us/library/dd744293 (WS.10) .aspx

  Method 2: If the above mentioned method does not work then try the system restore:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• How to change the type of user account in the registry editor

  Hello.

  Can someone tell me how to change the type of user account in the registry editor

  Thanks in advance... :-)

  Kind regards
  Rambeau

  Hello.

  Can someone tell me how to change the type of user account in the registry editor

  Thanks in advance... :-)

  Kind regards
  Rambeau

  You can not. You need to do this via the control panel / accounts of users or via the command prompt. In both cases, you need to be logged in as an administrator account.