KeyPress events for background application

Similar Questions

• Is AS3 an event for which application Android came out on its own?

  OK, I made an app for Android. And when we press the central button or back (lefthandside) of phone Android, we know all that Android apps always runs in the background.
  So my code is as follows:

  the first line (addEventListener) is a private function that works as soon as you open the application.

  NativeApplication.nativeApplication.addEventListener (flash.events.Event.EXITING, onMyAppExit)

  private void onMyAppExit (event:flash.events.Event): void {}
  trace ("onMyAppExit is running");
  saveProgress();
  }

  
  Basically, I want saveProgress() to run when the application leaves ACTUALLY being run in the background. I noticed that my application leave actually when I open another application like Candy Crush. I assumed that the Android operating system leaves apps automatically when applications are not used and when the application you use takes a lot of RAM. However, my code does that when I run my application in AIR Debug Launcher (Mobile). I know that, because I see the sign of the function in my window out when I click the x button in the right corner of the application window. But when I connect my Android phone to the computer and then-> AIR3.8 for Android settings-> publish and then I "Start to debug remote Session" and on my Android phone, I open my application first, then Candy Crush so that the Android OS automatically leaves my app, I don't see the trace. So I put that code does not work on my phone.

  Sorry, something like that scene is absurd in this context.  use:

  NativeApplication.nativeApplication (Event.Deactivate, onMyAppExit);

  There is also an event of Event.SUSPEND you can use.

• Closed event for inDesign Application

  I want to call a method disconnect from session chanelset in the event of closure of the inDesign application, but am unable to follow the inDesign application close event, can anyone suggest me on this.

  Thanks in advance.

  To listen CSXSInterface windowClose event.

  http://cssdk.host.Adobe.com/SDK/1.0/docs/Webhelp/references/csxslib/com/Adobe/CSXS/core/CS XSInterface.html #event:windowClose

  private void listen (): void

  {

  CSXSInterface.getInstance () .addEventListener (StateChangeEvent.WINDOW_CLOSE, csxsInterface_windowCloseHandler);

  }

  private void csxsInterface_windowCloseHandler(event:StateChangeEvent):void

  {

  do something;

  }

  I hope that helps!
  

• Error in Event Viewer: loading libraries of dynamic links customized for each application. The system administrator should review the list of libraries

  My system features, i7 thinkpad w540, 16 GB of ram and a 256 GB ssd. Using MSE as av with AMBM pro

  whenever I start my system, win 7 x 64, I get the following error in the event viewer:

  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  any help with this error?

  Atul

  Description: NVIDIA shim dll initialization

  Product: Shim NVIDIA D3D drivers
  Company: NVIDIA Corporationhttp://systemexplorer.net/file-database/file/nvinit-dll/33069751

  I would not be concerned by this driver.

• Problem with background application.

  Hi all

  I develop background application, which always runs in the background. If the application then restart my app starts to reboot. But for some unknown reason, to leave you my request. But I am unable to know the reason why is output.

  Can someone help me please in this?

  -Shekhar.

  On the device, tap L G L G

  Or, you can download the appliance event log using javaloader.

• How to use the script "click menu item" command on a menu item for an application that runs under another user?

  Hey everyone, quick question...

  I am trying to run this script:

  say application "System events".

  say process of "iTunes."

  click on menu item "Start Station" from the menu 'Song' to menu bar item 'Song' in the menu bar 1

  end say

  end say

  
  

  
  

  The idea behind this is to start a song selected currently playing station. I know, it's not hard to do it manually, but I want to be able to do it without having to call the iTunes app to the front. Now, this script works for my own iTunes app, but I have a second instance of iTunes connecting the second user on my computer at home (User2), with its own separate library and account and all. script I have works fine for an instance of iTunes under my user account, but I can't figure out how to specify which instance of iTunes, I'd like the script to work on.

  
  

  
  

  
  

  I want to emphasize as an FYI that i use.

  
  

  the shell script "connection f User2 /Applications/iTunes.app/Contents/MacOS/iTunes > & - 2 > & - &" with administrator privileges

  -to open my second instance of iTunes as User2

  
  

  
  

  is there a way to change the "process"iTunes"to say" something like 'process 'unix ID' say' and have the ID for each respective instance of iTunes unix?

  
  

  Let me know if I do not make sense... Thanks in advance to anyone who can help

  
  

  
  

  
  

  
  

  
  

  You can target a process of application using various properties of system events, for example:

  tell application "System Events"
    tell first item of (get application processes whose unix id is 15174) -- or whatever id
      activate --> needed when using GUI scripting
      get properties
    end tell
  end tell
  

• Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773)

  Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773) did a new install of windows... trying to update and it always fails to download... even small jets of microsofts help page and downloaded it... says file is corrupt... tired of this fight to get the puter back up to date

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that give repair install (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What architecture for my application?

  Hello!

  For my test bench, I developed the LabVIEW software. In the last months, I asked several questions in this forum, but always about the details of my application. Until now, I never really questioned the general architecture (which is certainly a mistake, that I want to learn).

  What drives this desire to review my work, it's that I am currently not able to interrupt the complete progam or subfeatures of controlled prematurely or if errors occur.

  I hope you could give me some suggestions which would fit my application better. I'm not really experienced in structured programming, use for example architectures producer/consumer etc and I'll read up on them, but first I need a general boost in the right direction.

  First a brief overview of my hard - and software:

  HW:

  • 3 different controllers control of actuators
  • 2 different cameras

  SW:

  • Front for the interaction with the user
  • Several measurement routines that use different combinations of actuators and cameras. For example "move to position 1 and take a picture, then move on to position 2, etc.. These routines can be quite long, including the analysis of the images and decisions based on the results. These routines must sit in event of an event structure that in turn lies in my main program (the program of the façade).
  • Void / screw (lowest level in my software) who send the actual orders for controllers, for example 'move', 'read the current position' etc. These Sub VIs are separated from my Panel VI and consist of structures events themselves, an event for every basic function. These event structures are controlled from the front panel via the dynamic user events. So basically a push of button on the remote.

  Finally a very brief example of workflow in my software:

  1. Façade is started. Along the SubVIs for controllers are also started
  2. Lance user measure routine N1 with a button
  3. Start of the event in the front panel. In this case, other events are generated sequentally, according to the algorithm of measure.
  4. These remote events live Sub point 1, for example remote press the buttons for the basic functions in the desired order (move, take photo etc.).

  Problem is that the user cannot terminate measurement routines before they are completed, because the program is locked up in the case of corresponding event.

  In addition, when a controller reports an error (e.g., loss of power), as routine orders keep coming which results in more errors.

  This should be possible with my new architecture:

  • The user in the front panel (as before)
  • Premature termination of all auxiliary program if the user wants or if the error occurs. Then a defined State must be entered (including closure of all references, power off all devices, etc.)

  I'm not at work right now, but I'll upload some screenshots later because let's face it – which was a wall of text

  But maybe it's enough for a few first thoughts of you?

  Thank you!

  I tend to like to have HAL - so I tend to create a module that is designed just to communicate with the instrument and then my main loop of the program (e.g. routine measurement / logic program) interact with that and sends updates to the user interface. This is because if I want to use this material in another application, I can re - use the 'module '. It's perfectly OK to have your material combined with your message loop - loop, but if it takes a long time to read the data of the instrument, your application would be not as sensitive to the façade events (because it must wait to finish first).

  So, you could have:
  -UI event loop
  -The main Message loop (responds to user interface events and your program 'flow')
  -Hardware Loop (to initialize and communicate with the instrument)

• Freezing of Windows Explorer (problem event name: AppHangB1 application name: Explorer.EXE)

  my laptop freeze everytime I try to copy files from one disk to another, and here is the problem report

  Problem event name: AppHangB1

  Application name: Explorer.EXE

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Hang Signature: e36f

  Hang the Type: 4

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Signing of additional blocking 1: 84a74b2e2362b73156ffd8ce815ab7de

  Signature of blocking additional 2:0433

  Signing of additional blocking 3: 7ac408085f85bc7b4993b6de39385374

  Signing of additional blocking 4: ef2c

  Signing of additional blocking 5: 7192d5cf15e616a12e2e559236f7057d

  Signing of additional blocking 6: a5d3

  Signing of additional blocking 7: 9338adb319feac4f0ba33134abc2bfbc

   

  Original title: problem event name: AppHangB1 application name: Explorer.EXE

  Hello

  1 did you change on your computer before this problem?

  2. this problem occur when copying all the files?

  3. you try to copy files to an external drive?

  You can check if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  (For Windows Vista)

• Loading libraries of dynamic links customized for every application

  Can someone tell me why I get this warning in my system (ID:11 event) Event Viewer whenever Windows7 x 64 boots? Should I worry about this? Is there anything I can do to make it go away?

  Walt

  For the moment, it won't affect anything else, if AppInit_Dlls is empty.  LoadAppInit_Dlls is an indicator that tells Windows to "respect" (load the dll in the AppInint_DLLs) the AppInit_DLLs value.  More former, prior to Vista apps will not know to LoadAppInit_DLLs a value of 1, so the dll would add him to this place would not be loaded.  It can be considered a good thing, because it is a quick way to get the (good and bad) code loaded into the address space of each loaded process user32.dll (practically everything), which deals with the AppInit_DLLs.  New apps are common sense for LoadAppInit_DLLs setting so they put 1 and also add components to AppInit_DLLs.  In your case, it seems that some program added DLLS to AppInit_DLLs, LoadAppInit_DLLs set to 1, and then the dll have been removed (manually? program cleaning? uninstall program?) of AppInit_DLLs, but LoadAppInit_DLLs was restored to the default value of 0 (or not being is not present at all).

  So, our exploration indicates that Windows based the decision to record the event on "Custom Dynamic Link Libraries loading for all applications" for the LoadAppInit_DLLs parameter, regardless of the content of the AppInit_DLLs value.

• HomeScreen.updateIcon updates the bad background application

  I have an application with two entry points. A single point of entry runs as a background application to listen to calendar changes. When the Exchange Calendar I need to change my icon on the home screen to the GUI of my app app part. However, if I am in another application when the event occurs, the current application has its icon has changed.

  I know that there is another version of updateIcon() in 4.7, but how do I handle this in older versions of the operating system?

  Use a global event to send a message to your Application that the calendar has changed.  Your application can then some he wants, including the amendment of the application icon.

  What is - world events and global event listeners
  Article number: DB-00145
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

• Canon MP Navigator EX has stopped working; Problem event name: APPCRASH Application name: mpnex40.exe

  Original title: Canon MP Navigator EX has stopped working

  I use Win 7 64 bit. I spent an hour with Canon. I followed their directions without success.  I did everything suggested on the internet without success.   I uninstalled and reinstalled. I tried to fix the corrupted user file. The scanner send scans to the computer for work. The person Canon thought it might be a corrupt and says something about a twain file function registry file. Here are the details of the problem:

  Description: Has stopped working the problem signature: problem event name: APPCRASH application name: mpnex40.exe Application Version: 4.0.2.0 Application timestamp: 4df9a6aa fault Module name: ole32.dll Version Module fault: 6.1.7601.17514 fault Module Timestamp: 4ce7b96f Code of Exception: c0000005 Exception Offset: 0004afb2 OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033

  Thanks for any help.

  Hello

  1. have you tried to create a new user profile?

  2. what happens when you work with Canon MP Navigator EX?

  3. do you get an error message? If Yes, what is the full error message?

  4. What are the troubleshooting steps you have tried to solve the problem?

  5. have you done any software or hardware changes on your computer before this problem?

  Try the following steps.

  Method 1:

  Run the fixit from following link.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833
  Display the results.

  Hope the information is useful.

• Need to know about the background application

  Test Simulator with JDE version 5.0. I work at the request of the alarm. So I created a background application, where I look in the database and perform the necessary task vibrant just the phone. I have another point with nongui param. Its works fine. Now the problem is, I set an alarm for once, now is the time and the alarm goes off and the user he repeated for 10 minutes, average while I just still run my application in the menu of the eclipse without closing the Simulator, I was expecting that the alarm that was repeated should get fired, but it won't. the problem always occurs when I run the application without closing the Simulator. So what can be the reason for this, and if I just closed Simulator and run it from the eclipse menu its new working fine means repeated when time comes it vibrates the Simulator can someone explain me what are the problem here.

  Do not disable not either sorry here...

  Your code looks fine.

  You can run this code too early.  You probably need to wait until the device is completely upward before you check this:

  http://supportforums.BlackBerry.com/T5/Java-development/write-safe-initialization-code/Ta-p/444795

• Background application of MysQL PHP

  Has anyone using PHP / MySQL / uninstall to develop a background application that is clocked at base?  Basically, I'm looking to trigger a procedure stored all "n" minutes.  Is it possible to write / configure an app for that?

  Hi Jim,.

  There is a little bit different cron to applications running on a windows platform.

  I couldn't tell you who is the best.

  ICron

  ZCron

  nCron

  etc.

  Google cron for windows.

• Flow of events for the head-scratching?

  There is a lot of talk about how the new event stream makes easier communication between classes. This sounds swell, but nowhere is well explained. All the examples I find concerns dispatching of events within the same class or looped through a customEvent, but I need a way to tap into this event for communication flow backward.
  
  I have a document mainGUI class which distributes subclasses of my application. How can I configure a listener in mainGUI which brings together some events of any of his children or grandchildren? And how do I use this line to display the properties of the object?

  It's good now. I managed carefully dissecting Lee Brimelow's excellent oopscrollbar at gotoandlearn, do a bunch of reconfigurations. Seems AS3 is not that you are wicked Uncle after all.