Flow of events for the head-scratching?

Similar Questions

• Another room for the heads side on different Master Pages?

  I prepare an updated book existing with about 40 chapters, and I added a head aside to add graphic markers in the margins.  I took a chapter, went to the page master and enlarged the flow of the text.  Then, I went to Format | PageLayout. ColumnLayout and clicked on "room for side heads.  I then imported the layouts and the properties of the Document (to pick up the room for the heads side) in the other chapters.  For the main text flows on the 'left' and 'Right' template, it works very well.

  However, it is ruin the flow of the text on the page 'First' master, that I use for my chapters.  Strangely, the head side seems correct, but the left margin moves in 1.75 ".   If I click on the first page and turn to the "House of Chiefs side" off, then turned it off it for the entire document.  Here's a screenshot:

  

  And here's after:

  

  Any suggestions on how to fix this?

  Thank you!!!

  John

  www.controlgeek.NET

  Ah, you put me on the right track - I had to change my "Chapter title" paragraph format to "through all of the Collins and side heads" and that fixed it.

  Thank you!

  John

  www.controlgeek.NET

• Hello. I started with the DPS. Is it possible to publish a magazine for a limited specific target group? For example, in a Department of a large company? Or for the heads of the different services? If so, how should I do? Thank you for your help.

  Hello.

  I started with the DPS. Is it possible to publish a magazine for a limited specific target group? For example, in a Department of a large company?

  Or for the heads of the different services? If so, how should I do? Thank you for your help.

  The short answer is Yes.

  Click on the request of consultation in link Digital Publishing Suite help | DPS pricing options to receive a quote for your project of the DPS license.

• Is there a way to detect the mouse during the event for the controls within a tab control?

  I need to change the mouse pointer when it moves on controls that are found in the tabs.

  Now when the mouse passes over the tab, LABVIEW does not detect the saperately of controls for the mouse over event.

  Is there a way to do what I intend to do?

  Your problem is with the Panel.Controls [] property. It does not return the controls that are inside containers (tables, tabs, groups) and returns only the container itself. As illustrated by Sam, if you want the references to the controls in the tab, you must get the references to the pages and get the controls on each page and add them to your original table and do this recursively.

  You can either write a VI to do this (or search for it. There was posted here screw that analyzes recursively the FP for all control references) or everything just statically for this control a tab and move. There is also a VI delivered with LV that can help you with this, but I suggest that you not use, because it will be difficult to operate if you generate an EXE file.

  And I also recommend the Tool of Capture of Code.

• triggering event for the time of day

  I'm trying to put in place a system that requires taking several samples per day at the fire time (at irregular intervals) and then repeat it every day for a week or two. So far, I have tried to use a TimeStamp control array, but I'm not getting much. Does anyone has any ideas on how to do it, or can point me to an example that I missed in my research.

  Thank you

  So what I would do, is create a loop of events with a single event - a timeout. Conduct of this event would be a picture of the time when an action should be performed. The loop starts, remove the first item and subtract the current time of the time goal. This will give you the time in seconds before the event. Multiply by 1000 to get the number of milliseconds before the time runs out. Feeding this value for the time-out. Then each timeout event fires of time, of the index to the next item and calculate a new delay.

  Mike...

• Regarding events for the text box

  Hi all,

  I'm new with the Labview I have it the simple program I use the tab control in the tab control I have set Num control a (text box) in the tab 1 and Num B in the tab2 and control on the front panel, I place the indicator of Num C.I want when I set the value of a control number and enter then value goes to the led num c.Simillarly when I put the value B number and press on enter, then the value of B will go to the num indicator. How do I put the event on the text box as the value of A or B num command will go num indicator capers press on enter for the number corrosponding control.

  Due to the fact that I can't delete my post, I'm editing only say I am ashamed of what my response was completely wrong because of the mistake of reading your question :/

• Using more of a structure of the event for the same control in a machine to standard reports

  Hello

  I'm working on a test sequence using a machine standard reports in the examples of LabVIEW.

  Part of my test, I displays a waveform on a graphic scale. The entry for this is a PXI-4070 DMM. This goes into a "while loop" update permanently the waveform. The screen simulates an oscilloscope. The test operator must make adjustments while watching this screen. This bit is working and I have no problem here.

  On my front, it has a "continue" button to the next part of the test once the adjustment is done. Some changes are then made to the configuration and the following adjustment must be made the same way, that is to look at the screen, make the adjustment, press on ' continue. Is where I have the problem.

  I tried using the event structures in the while loop the loop stops when you press the button continue. This works for the first adjustment, but when the test arrives at the second stage of the adjustment, the event seems to "remember" and the loop ends immediately.

  Is it far from resetting the event so that the button can be used again in a good way

  Kind regards.

  
  

• '=', ', ';', 'asm' or '__attribute__' before error for the header WHEREAS C++ file.

  The path location type Resource Description
  EXPECTED '=', ', ',';', 'asm' or '__attribute__' before 'geolocation '.

  I searched high and low in Google to find a solution to this.  The header file is GeoLocation.hpp and it is the class declaration "class location". "."

  Any thoughts?  My C++ is a few years old.

  My experience tells me that you try to use a C++ class (class doesn't exist in C++ I suppose you know) in a C project.

  The key is:

  #if defined (__cplusplus) || defined(__CPLUSPLUS__)
  

  so that it compiles only in a C++ 'context' (I guess you'd call it).

  Test case:

  //------Test 1 (just the class)
  class GeoLocation //Error
  {
    public:
      GeoLocation();
      ~GeoLocation();
  };
  
  //------Test 2 (extern C)
  extern "C" {
  class GeoLocation //Error
  {
    public:
      GeoLocation();
      ~GeoLocation();
  };
  }
  
  //------Test 3 (extern C++)
  extern "C++" { //Error
  class GeoLocation
  {
    public:
      GeoLocation();
      ~GeoLocation();
  };
  }
  
  //------Test 4 (only use for C++)
  #if defined (__cplusplus) || defined(__CPLUSPLUS__)
  class GeoLocation //No error :D
  {
    public:
      GeoLocation();
      ~GeoLocation();
  };
  #endif
  
  //------Test 5 (only use for C++ and extern C++)
  #if defined (__cplusplus) || defined(__CPLUSPLUS__)
  extern "C++" {
  class GeoLocation //No error :D
  {
    public:
      GeoLocation();
      ~GeoLocation();
  };
  }
  #endif
  

  I did the code in the same way (with the if statement) then did::GeoLocation() GeoLocation and everything worked and compiled correctly.

• 'Room for the heads side' on the Master Pages does not not on body pages.

  In a new document, I created master pages, each with a text frame type of the "model for Page body text, frame 'each with the same tag stream."

  For each block of text, I enabled property of "heads of Lounge next door.

  When I apply master pages to the body of the document (Format > Page Layout > Master Page use > Use Master Page: > Apply), the property of "heads of salon for side" disappears.

  Does anyone know why my text frames do not follow the format of applied master page?

  I use Framemaker 11.

  > For each block of text, I enabled property of "heads of Lounge next door.

  If I remember a recent discussion, you must enable that via:

  Format > Page layout > column layout

  [*] The heads side room

  and it is a document, not just for chosen setting the Master Pages.

• Is there a VM event for the VM host name change?

  Hello

  I have an application that is in talks with the VC to get the events from the virtual computer.

  I have a virtual machine on which I install VMWare tools to get the host name of the virtual machine. From now, the first time that the virtual machine gets up, my request to get the host name for this virtual machine. Now, if the host name of this virtual machine changes, is there any event that will be generated by VMWare or VC tools that my application can subscribe to in order to choose the host name change?

  Thank you

  There is no integrated case that will capture this.  The virtual machine has the dns name property that can be extracted from the db, or using one of the vi toolkits.  You can run gets against these data and validate it against the previous value, but no direct case is only triggered when the host inside the virtual machine name is changed.

  -KjB

  VMware vExpert

• How to change the font size for the header component of group header text

  Hello
  
  I need to change the size of the default font of the text in the header of the component of the < af:panelHeader >. I tried to use a custom skin, but I'm not able to get the correct selection for it. I tried under css:
  
  . Af CustomHelpHeader | panelHeader {}
  do-family: Tahoma, Verdana, Helvetica, without serif.
  do-size: 8px;
  make-weight: bold;
  }
  
  and page jsff I use it like:
  
  < af:panelHeader text = "use this tab to add and offers customization".
  helpTopicId = "OHW_BUNDLE_GI_CS" id = "phContent".
  styleClass = "CustomHelpHeader" >
  
  This has no effect on the header text and the size of the displayed font is always default 14px.
  
  Can someone help me with the proper way to apply the counting?

  Hello..
  It's the PanelHeader h1 tag, we can apply your style by substituting the PanelHeader style as follows. It works for me xdl is the style of substitution class.

  
  
  and page jsff I use it like:
  
  helpTopicId = "OHW_BUNDLE_GI_CS" id = "phContent".
  styleClass = "xdl" / >
  

• use marker iff section is too long for the header

  Hello everyone,

  I wonder: is it possible to implement FrameMaker using a marker iff there is one on this page?

  Here's the problem: I have a book with several chapters of different authors. Some of them used topics that are too long for the headers. For those I want to use markers.

  I know how to display markers, which I don't want, because then I have to create a benchmark for each unique position in the book (using this master page). And I know how to view the different titles for example < $paratext [H1, H2, H3] >.

  Now I'm looking for is something like this < [marker, line] $paratext >. In plain language: 'check if there is a certain marker. If there is one, show the marker, otherwise display the heading."

  Then I would be able to use the same master page and would need to use markers only where a title is too long.

  Thanks in advance

  Dennis

  Dennis,

  Take a look at http://forums.adobe.com/message/3503638#3503638

  You could create an alternative heading tag (for example InvisibleH1) with an invisible color in a framework anchored to it and can then use the building block <$paratext[InvisibleH1,H1,H2... etc.]="">. Just toggle the views appropriate to hide text in anchored frames.

• Canvas, click events for the child objects

  I am trying to record an event for each child object.
  and I use the following code
  
  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_08.html
  in the part of the examples (second example)
  
  However, I am dynamically add custom Image objects extended and when click on a displayed Image and check for its type if its correct type, it would just return false.
  Alert.Show ((event.target_est_dans_MyAClass).toString ());
  
  When clicking on one of the children is opposed and display the event.target.name and it's just also displays a silly 'FlexLoader74' or whatever number. Somehow, it loses its properties or the type of the object.
  
  Is there something that I am missing?

  The loaded image, you click on IS what would return with event.target. It is added to your image class extended as a child of this class. So it's probably that you want to do:

  Alert.Show ((event.target.parent_est_dans_MyAClass).toString ());

  Keep in mind that if EMBED you your images in your image personalized instead compile-time class, then you can check for this as you did before:

  Alert.Show ((event.target_est_dans_MyAClass).toString ());

  TS

• How to program the events for the back of the device button

  Hi all, I wanted to ask, is it possible to change the action of the back button on the blackberry device? I want to program my application after the user login, the back button does not return to the screen connection but moved into the background... Thank you

  's called it the ESC key. You can override onClose, for example, which is called when you try to close a form.

  or you can crush keyChar and check for Characters.ESCAPE

• Add on Click event for the button

  Hi Experts

  I have a button in my INDD file. Now, I want to add behaviors show/hide buttons when you click the button. How I can do this via Javascript ID CS5 Windows.

  Thanks in advance

  Concerning

  Arul

  Hi Arul,

  Here is the solution for your problem:

  var myDoc = app.documents[0];
  var myBtn = myDoc.buttons[0];
  
  var bShw = [myDoc.buttons[1], myDoc.buttons[2]];
  var bHid = [myDoc.buttons[3], myDoc.buttons[4]];
  
  var addBeh = myBtn.showHideFieldsBehaviors.add();
    addBeh.behaviorEvent = BehaviorEvents.MOUSE_UP;
    addBeh.fieldsToShow = bShw;
    addBeh.fieldsToHide = bHid;
  

  Do not forget that the bShw and acachees are arrays of keys.

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com