keys NUM 0 does not work

Similar Questions

• Satellite C660-11W - Num pad does not work

  Hello!

  I have a Toshiba Satellite C660-11W, which I bought 10 months ago. Since October, the num of my laptop keypad does not work, but when I press the "Num Lock" button, it makes a noise as I had turned on the StickyKeys.

  How can I solve this problem?

  Hello

  Looks a bit bad operation of the keyboard.
  I think that the service technician if you want to initialize the digital keypad function by Test & Diagnostic software and will replace the keyboard to fail the test.

• The key fire method does not work

  Hi all

  I have a little problem with my javafx application. I designed my application with the scene designer and added a few buttons for them. For each button, I defined a listener method (annotated with @FXML) and

  I also added each button as member variable to my controller. So far so good.

  Now my controller extends an AbstractController which has certain functions inside. Inside of my method to initialize I pass the button to a method of the abstract class to collect the buttons inside a set.

  Now, to a point that I want to get all buttons of my abstract class defined but that does not work.

  I tried to add to each button setAction method and implemented an anonymous class before you put the button in my game. Then the fire of the button method calls the anoymous class / method. But

  Why it works don't not with a @FXML annotated method?

  The problem would be the "timing"? If I switch the button the the class abstract in the init, the button may not be registred listener method? Just for my understanding, when the init method calls anyway?

  It is difficult to create a small test application for this problem, but maybe someone can help me already.

  Greetings,

  Hauke

  I misunderstood the question a bit, I think. It also works with the following changes:

  Buttons.fxml

  Controller.Java

  import javafx.event.*;
  import javafx.fxml.FXML;
  import javafx.scene.control.Button;
  
  public class Controller extends AbstractController {
    @FXML private Button button1;
    @FXML private Button button2;
    @FXML private Button button3;
  
    public void initialize() {
    this.addButtons(button1, button2, button3);
    }
  
    @FXML private void buttonPressed(ActionEvent event) {
    Button button = (Button)event.getSource();
    System.out.println(button.getText() + " fired");
    }
  }
  

  In this version, where managers of the action for the individual buttons are defined in the FXML, these action handlers will be actually installed earlier: before Controller.initialize () is called (and potentially before the controller is instantiated and the buttons are injected in the it).

• Smartphones blackBerry lock key / sleep button does not work after upgrade the OS to version 5.0 Bundle 1168

  a refresh, I noted that the "key lock" button and the button 'sleep' on the top of the phone no longer works. The phone unfortunately does not go on standby when you press the mute. The mute however put mute a telephone conversation.

  Mari_43 wrote:

  is there anyway that I can get back to a version that supports?

  Yes, you can downgrade to an older version if you want.

  1 remove the newer operating system of your PC by going to control panel > Add/Remove programs. (If you never physically installed the OS on your PC, go to step 2.)

  2. next, download and install the earlier version of the operating system. Operating system blackBerry downloads

  3. install the older operating system to the computer by running (double click) the downloaded file.
  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• HP pavilion n011tu 15: keys F2 & F3 does not work (brightness and contrast)

  Brightness and contrast of the F2 and F3 keys do not work. I can adjust the brightness by using display settings, but do not use keyboard keys F2 and F3. I have the setup of windows 8 and the model is n011tu.

  Hello

  Try the following.

  Download the Intel HD graphics installer on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63064.exe

  Once finished, download the Chipset driver on the following link andreinstall.

  http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62417.exe

  Once resettlement Chipset completed, do not restart as a guest, rather open your download folder, right-click on the Intel HD graphics card installation program and select "Run as Administrator" to launch the installation.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows take over completely for a few minutes before checking the function keys f2/f3.

  Kind regards

  DP - K

• I have a genunie product key but it does not work. How to solve the problem?

  I bought a PC refurbished which came with license Windows XP Pro renovated the Micro Center near my house. My son got the infected PC and so I decided to reinstall the operating system. I used the product key on the label of license on the PC, but it did not work. I went to Micro Center for help, but they have had the same problem and then I recommend to contact Microsoft Support. To my surprise, it is so hard to get help from Microsoft even if I have a license and use a product of Microsoft Genunie. Is this an easy problem to solve, or should I complain (or continue) Microsoft to have this problem resolved? Thanks adavance.

  My suspicion is that it's a SP3 - the description of the disc key you give seems to be right (from what little I can find that the part number on the web) for a disk of SP2.

  You may be able to confirm this by calling an Activation Center and asking them to confirm the validity of the key - use your local number in this list.

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• Key Action WiFi does NOT work on Pavilion DV6t-7000

  I just got a new Pavilion DV6t-7000 Quad Edition laptop, and the first thing I did after I boot the system was to upgrade the operating system.  I have an MSDN subscription, so I've upgraded to Windows 8 Pro (RTM).  Everything is great... except for the WiFi button.  It does simply not to turn on or turn off the WiFi connection.

  It always shows a white LED while the WiFi is on, and pressing the button does nothing.  Other action keys may work... the brightness, mute audio, etc.  If I disable the WiFi in the network Panel, then the light turns red.  As if she recognizes the WiFi it's takes no action to actually turn on or turn it off.

  I updated the BIOS to the latest version, by the site of HP support for the 64 bit of Windows 8 OS, and I checked in the BIOS action keys are enabled.

  Can someone help me get this to work?

  Thank you!

  -Andrew

  Have you tested it before loading Windows 8 on it?
  
  Support of thing going before interview, that Windows 8 drivers are available or not, is to perform a recovery to the original embedded operating system.
  
  If it is a fault, the question would be present in the original Windows 7 operating system as well. I suspect that this is largely a software/driver problem.
  
  Also, I recommend the update to the BIOS before installing Windows 8. Windows 8 installations work differently with the BIOS that previous versions of Windows, so the end result would be different to reinstall Windows 8 from the version of the BIOS is different this time.
  
  However, I recommend he get back to Windows 7 in order to ensure all features is present.
  
  I know you probably don't want to go back in the recovery efforts there to Windows 7 and then put 8 on.
  
  By chance, you did the recovery disks for your system first? If this is not the case, they must be ordered from HP. You can try to use the Recovery Manager to create, but I don't know if it will work since the operating system has been modified.
  
  In all cases, whether it works or not with the original software, she shipped will help determine if it is a defect or not. More than likely, it is not and is only a matter of unfortunate compatibility with Windows 8.

• Key keyboard control does not work do not

  Hello world

  I recently (about a month) has bought a new keyboard game v100. I plugged it to my Macbook Pro and my keyboard installation and at the beginning of each key program was very good. Then suddenly today, my command button on keyboards (which is the windows button) has stopped working even though it was fully functional before. I first encountered this problem when I tried to change the apps did not. I then tested several functions that require the key command (cmd + t, cmd + c), but none of them worked either.

  Can someone help me solve this problem?

  Thank you.

  Check if something is wrong with the mapping of the modifier keys:

  yout http://9to5mac.com/2016/03/17/How-to-remap-Windows-Keyboard-Buttons-match-Mac-la.

• Satellite A350 FN key - 10 b does not work

  I have the same problem... I've tried everything. I reinstalled Windows 7 on my A350-10B and what is strange, some of the FN - key as Sound on / off or brightness control works fine, but only until I install VAP. Then Fn doesn't work :/

  Hello

  He needs the support of card Flash utility for Win 7!
  Choose the one published for L500!

  First install VAP then Flash Utility card holder. These two tools must be compatible with Windows 7!
  Restart the device, and then test it again.

• 'original!' activation key Windows 7 does not work on Mac!

  Dear all,

  I recently bought a Mac, and I was hoping to use my original windows 7 Home Edition I used before on my pc in the House.
  Unfortunately I get messages from Security Center,... .saying my windows could not be activated, I have to type a different product key, or I have to buy a... etc.
  I don't know who I assume to address with this problem?... Microsoft or Apple?
  I saw people with similar problems around forums, but found the same questions for example I saw someone who had problems, because its windows was not a true produced.
  In any case... If someone could give me an answer, or direct me somewhere I can find a solution, I would be really grateful.

  Kind regards

  Inimma

  Dear all,

  I recently bought a Mac, and I was hoping to use my original windows 7 Home Edition I used before on my pc in the House.
  Unfortunately I get messages from Security Center,... .saying my windows could not be activated, I have to type a different product key, or I have to buy a... etc.

  OEM System Builder licenses are usually related to the first computer on which you install. You could always phone activation if the house built computer is no longer in use:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  I don't know who I assume to address with this problem?... Microsoft or Apple?
  I saw people with similar problems around forums, but found the same questions for example I saw someone who had problems, because its windows was not a true produced.
  In any case... If someone could give me an answer, or direct me somewhere I can find a solution, I would be really grateful.

  Kind regards

  Inimma

• Unwanted search pane in Word (Windows7, Office 2007), keyboard and then acting weird, unpredictable, F1 key and then does not work. Office 2003 has been removed before installing Office 2007 and Word 2007 seemed ok before that.

  While typing in a Word Windows7 (new office 2007) doc I suddenly get the stream to the right of the screen, not asked for.  Go to the revision, Proofing tab shows the space search button highlighted (never selected by me);  my keyboard (Microsoft!) and then crashes and behaves strangely and I can't seem to do anything. I can't find a way to remove or to move from this unwanted intrusion with the exception of the stop and restart, but it happened again and again.  Got a 3000 Word report to write, going crazy now.  No joy with the help online - in fact the F1 button stops working during these "tricks".  Someone at - it similar problems, or ideas where to go from here?  The most appreciated

  We sat, November 29 09 17:23:58 GMT, Pix101 wrote:

  > While typing in a Word Windows7 (new office 2007) doc

  Please note that there is no such thing as a word "Windows 7".
  document ". You're talking about Word 2007 (part of Office 2007) and
  It has nothing to do with Windows 7. Yes, it runs under Windows 7,
  but it can also under other versions of Windows. Word is a
  art of the operating system.

  Ask a question about word in a Windows 7 forum. You are
  much more likely to get the help you're looking for, if you ask
  in a word (or newsgroup) forum since it is the place where the Word experts
  Hang.

  > I suddenly get the listed to the right of the search bar
  > screen, not asked for. Go to the Review tab, check
  > Search button highlighted box shows (never selected
  (> by me); my keyboard (Microsoft!) and then crashes and
  > is behaving oddly and I can't seem to do anything.
  > I can't find a way to remove or change this undesirable
  > intrusion except by closing but down and reboot
  > It happened again and again.

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• I have a product key, but it does not work.

  Help!

  You've been given for most likely a redemption code, not a serial number

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Dash to key command here does not work in CS4 and OSX 10.7 (lion)

  Unable to invoke the keyboard command for dash here since the upgrade to lion.

  Works great when you select via menus.

  I was wondering if anyone else encountered this, and if there is a solution.

  This problem occurs when you have installed 1password.

  The keyboard shortcut for auto fill your login information in your browser is defined on CMD +- by default in 1password. Assign to another, or to change the default value of InDesign. I put the 1password shortcuts Alt + \.

• Satellite L505-13D - Fn key does not work

  Hello
  I have some problems in my laptop

  Key Fn - 1 does not work with any service of Toshiba, only with windows keys, this happened after some windows critical updates (win 7 64 bit)
  2. I have not found my cell phone ' number series or in the site Web of Toshiba part number.

  Please can someone help me
  Thank you

  Hello

  The FN keys are controlled by the Support of Flash memory card utility.
  You will need to reinstall this tool.
  But also the VAP (value added package) must be reinstalled.

  I recommend first of all remove the system from the Flash and the PPV card.
  Then restart the device and clean the registry with CCleaner.
  After that, you need to install the two tools VAP and Flash memory card Support utility

  Good bye

• Qosmio G30-223: keyboard key '2' does not work in console/konsole/xterm in Debian

  Hello

  I installed debian on a qosmio g30-223, it works correctly except the key of a keyboard in console/konsole/xterm.
  Under KDE, all the keys work but when I'm under a console (without xorg), konsole or an xterm, the '2' key (shift + a) does not work.

  It is a french keyboard layout and a card keyboard fr-latin9. Before connecting, the key also works.

  Any ideas?

  Hi face,.

  I have gentoo with 2.6.17 kernel and windowmaker as office. I know this problem. Maybe it s an idea to check the file xorg.conf to map keyboard under X then to change the keymap under console as X replaces the console overview.
  If the worst comes to the worst, try "dpkg - reconfigure console - data ' to choose a new layout for your page layout.
  I think that there are more keymaps under the hull for french available key-layouts, just to play with it. :)