KKKKK application fails to work even after the update of the latest graphic drivers

Similar Questions

• ESX 3.0.2 Build number even after the latest patches

  Hello

  as soon as I installed the latest patches for ESX 3.0.2 version number still shows 134609. Usually, it goes back once the patches have been applied.

  Any ideas?

  Raoulst

  Use vmware - v to check the version of latetst on your box

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Need the latest graphic drivers for Satellite 1900 - 704

  Hi all.

  I just bought a Satellite 1900 704 from a friend who has updated. The problem I have right now is the graphics driver. I have the drivers and the computer works well. The computer is good enough to play related games like half-life 2 and World Of War craft. But when I run half-life 2, he told me that my graphic driver should be upgraded and it might not work properly.

  It still works, but when I play World of War craft the graphics are quite wrong and distorted and does not play. I downloaded the latest drivers from the Toshiba site but no luck. It's a GeForce 6800 Go. I tried the Nvidia site for drivers, but none are compatible.

  It would be great if someone hade any idea on what to do. Appreciate the help.

  / me

  Hi Robbin

  I had Satellite 1900 703 nearly two years and this unit is known to me. You're right about the performance of the laptop. The performance of the graphics are really good and I was also able to play several games but I had trouble with Far Cry. The graphics card was absolutely not powerful enough for him.

  I can tell you one: If you can play games more recent you will be lucky, but if you have some problems with graph there is not much to do. You must understand that this unit is old enough and you can't wait for graphics to force und fabulous graphics giving more than possible performance.

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• Equium L40 - question on the latest graphics driver

  Hello

  I have a laptop L40 and I have problems with the display driver. ?

  I use Win Xp SP3 I have all the latest drivers including Bios ver 5.5

  The machine works fantastic and I am very happy with it, except for some graphics programs the only not to include/display as it should.
  Is there a more basic graphics driver, I can try to see if it helps to solve my problem. If so, please give a link.

  Thanks for any help coming next.

  Phil_H

  Hello

  The latest graphics drivers are already published on the European driver Toshiba page.

  If you want, you can see some graphics drivers for Satellite L40 / Pro L40.

  These units are very similar to the Equium L40 and possibly there are other, more recent graphics driver version

  But generally all available drivers are already displayed on the page of Toshiba.

  Good bye

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• One by one my plugins After Effects stop working, even after reinstalling AE

  Good,

  It is a strange.

  I got several plugins for After Effects crash and die in a row now. It started with one and it starts to look like a failure of plugins to work in the latest After Effects - even after their updating and reinstalling AE completely.

  What happens is the following; a plugin starts to give an error at startup (or same æ crashing completely). Can I remove the panels (or even from the folder scripts completely). The program works very well for another day or so with other plugins installed and anchored in the panels.

  The next day, another plugin no longer throw up another mistake of his own.

  No update or changes since, except using AE for hours.

  The cycle repeats; I remove this plugin, continue to use AE (feature slowly lose this way) and then the next day fails a few other plugins...

  There may be a third culprit somewhere, it might even be Java associate? Since there were a few updates in recent weeks?

  But this is the behavior I've seen so far. It's like a slow systemic breakdown and I don't know how to stop it. Purchased same plugins became useless for me.

  Anyone else knows a similar behavior? Or someone who has experience?

  The problem is the plugin related.

  It turns out that the fb-toolbar plugin had a bug which caused its preferences file massively inflate (600 MB +). Of course, it was not supposed to happen. I spoke with the developer of this plugin and everything's hunkydory now. Thank you!

• My optical mouse 3000 does not work even if the red light is on in the background

  My optical mouse 3000 does not work even if the red light is on in the background

  Hi Russell,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the optical mouse 3000.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?
  3 is confined with any specific application?

  I suggest you to see the steps in the following Microsoft article.

  
  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  We would be more than happy to help you if the steps above did not solve the problem.

• deployment of imagery-vs is on alert, even after the redeployment of imaging - vc.ear

  Hi all

  
  

  Having extended the domain to include the IPM and the University Complutense of MADRID, I found that the deployment of imagery-vs is in warning state. but I am facing the same problem even after the redeployment of the imagery-vc and I get under the same WebLogic console reason: -.

  ""MDB application Imaging -vc is NOT connected to e-mail System. ' "

  
  

  Help, please.

  
  

  Kind regards

  Vipul Verma
  

  Thanks Amey and Srinath for quick answers. Version of WCC is 11.1.1.8.0

  The problem is resolved after you set the IPM server as a target in the jms Viewer.

  Kind regards

  Vipul Verma

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE

  Hello

  Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?

  SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';

  TABLE_NAME, TABLESPACE_NAME

  ------------------------------ ------------------------------

  TEST2 USERS

  TEST USERS

  SALGRADE USERS

  USERS OF BONUS

  USERS OF THE EMP

  USERS OF DEPT

  6 selected lines.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf

  [oracle@localhost orcl] $ sqlplus scott/scott

  SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select count (*) from test2;

  Select count (*) from test2

  *

  ERROR on line 1:

  ORA-01116: error opening the database file 4

  ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'

  ORA-27041: could not open the file

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select count (*) of the test;

  COUNT (*)

  ----------

  5000

  SQL >

  The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.

  Hello

  The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)

  You can see if you have lsof installed

  just try

  lsof | grep datafile_name

  Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.

  See you soon,.

  Rich

• XAV-701HD questions, even after the update - changing Staion, no sound after the cycle of keys.

  I have a Sony XAV-701HD installed in my 09 Ram. I have had for a while now and still have problems even after the last update of the firmware. Since I installed the radio, the stations would change when I turn off the key and then restart the truck. Ususally a station off where I was listening. Then I noticed that when you listen to a CD, if I stop the truck, stop, and restart, I have sometimes no sound from the CD unit that change source to something else then back to CD. In addition, it seems to take an eternity for the CD start playing when I insert one, or when I start the truck every morning. Sometimes the CD start just up, other times not. Now, I've added SiurisXM to the unit, and I noticed that when I turn the key off the coast, and then back on, the device will not be playing Sirius Music until I have changing source, let the next launch of source for play, then switch back to sirius. I'm a professional installer, I know all my wiring is good, everything works. My Kenwood has worked perfectly in the same truck for 2 years before I changed to the Sony. Any ideas?

  
  

• Unable to connect even after the user password reset

  Hai all,
  
  10.2.0.3 on Linux
  
  Reset a user password and the user is unable to connect as you can see below
  
  
  [oracle@testdb 10.2.0] $ sqlplus sys/Manager as sysdba
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:21 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  SQL > alter user sysman identified by oracle.
  
  Modified user.
  
  SQL > disconnected from Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  [oracle@testdb 10.2.0] $ sqlplus sysman/oracle
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:32 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  
  Unable to connect even after the user password reset

  Check
  How to change the password of the database user Sysman (DB control repository schema) [ID 259379.1]
  EMCA 11 g fails with the error "ORA-01017: name of user and password invalid; connection refused"and" username/password invalid name; For DBSNMP or user SYSMAN"[ID 741530.1]

• Until the latest update when the AutoComplete bar has been selected, he "went" no other by clicking. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.