KODE 80240016 - cannot install updates

Similar Questions

• Vista - Error Code: 80240016 (cannot install updates)

  My laptop is also failing with error code 80240016windows update. It's on since October 2009, and I have repeatedly "try again" without positive result. I use Windows vista. Please help because I think it makes my system to slow down.

  0 x 80240016 is to "try to install so that another installation happens or reboot is pending"

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  TaurArian [MVP] 2005-2011 - Update Services

• Vista - Error Code: 0 X 80240016 (cannot install updates)

  I had problems with my windows from loading up sometimes, I have to let a repair of half the time before it will load up, I got messages that my windows Defender has stopped working properly and when I try to update I get this error code 0 x 80240016, I need help I don't know what to do I don't know anything about using a computer, so please tell me step by step what to do. I have windows VISTA, thanks.

  I had a windows care, but I deleted it when it expired...

  You should have uninstalled OneCare AND downloaded / run the OneCare cleanup utility and then installed AVG [1], BEFORE the expiry of your OneCare subscription.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a USB stick, SD card or external drive that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ===============================
  [1] If AVG was installed correctly (and it didn't), Windows Defender would be has been disabled by default. CF.http://www.avg.com/us-en/faq.num-2672

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code: 80240016 (cannot install updates)

  Origanal title: error updating windows vista Home premium

  Windows vista family premium update error code 80240016, how should I do?

  Hello

  You can see the link provided below for more information on troubleshooting related to the error message that you provided.

  Windows Update, error 80240016

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80240016

  You can also check:

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  http://support.Microsoft.com/kb/957307

• Vista - Error code: 80072EFD & 80240016 (cannot install updates)

  I have an equipped with Windows Vista with Service Pak 2 is installed.  I keep having problems with downloads.  That they be updated Windows or any other type of downloading files from the internet.  I can get on the internet but can not download.  I have reset my firewall setting but it has yet to help.

  Any suggestions?

  You tried to run a File System Check

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

• Vista - Error code: 80070490 & 80240016 (cannot install updates)

  Windows Update error Code: 80070490,80240016

  OS: WIndows Vista Ultimate SP2

  I had this error on update during the installation of 4 important updates. KB967723, KB970430, KB2158563

  KB972145.

  1 leva code error

  It was suggested to repair windows. It did not work.

  2 downloaded Windows6. 0-KB947821-v10 - x 86

  Another suggestion was to download the file Windows6. 0-KB947821-v10 - x 86. This download crashes 3-way quarter through

  3. http://support.microsoft.com/kb/957307 follow the instructions. Still no.

  4. manually downloaded 947821

  Please try the manual download of 947821. It is common for it to
  seem to not do anything and I saw him take as one
  hour or two to complete.
   
  http://support.Microsoft.com/kb/947821
   
  Subsequently, thanks for posting the %systemroot%\Logs\CBS\CheckSUR.log to this
  thread.
   

  -Mike Burr

• Vista - Error Code: 80240016 (cannot install updates KB982381 KB982632, KB905866)

  Hi, I can't get these updates to install a partition, all other updates successfully.

  A security update cumulative for Internet Explorer 8 for Windows Vista (KB982381)

  Update for the Internet Explorer 8 for Windows Vista (KB982632) compatibility view list

  Update for Windows Mail Junk e-mail filter [June 2010] (KB905866)

  I tried to uninstall Internet Explorer 8 update, to try to reinstall it, but it will not uninstall.

  What can I do to fix this? Thank you.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Error code: 8024200d (cannot install updates)

  Error code: 8024200d (cannot install updates)

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Option 1 - Download updates manually and install the same (you can find the same via number KB) -http://www.microsoft.com/downloads/en/default.aspx

  or you can simply try.

  Option 2 - How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  FYI - read - http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error codes: 646 & 643 (cannot install updates)

  646 & 643 error codes. Cannot install updates.  Need to fix this!

  Are you referring to: http://support.microsoft.com/kb/2258121

  See also: http://support.microsoft.com/kb/958052

  TaurArian [MVP] 2005-2011 - Update Services

• Cannot install update kb971486 keep getting error code 80072EE2

  Cannot install update kb971486 keep getting error code 80072EE2

  Visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Otherwise, try to reset Windows Update components:
  http://support.Microsoft.com/kb/971058

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Cannot install updates of security for xp #KB2698023 and #2656370

  Cannot install updates for XP #KB2698023 and #KB2656370

  Hi PeteBosch,

  Welcome to the Microsoft community. According to the description of the problem, you are not able to install updates (KB2698023, KB2656370). Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  You can read this article for more information:

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

  I hope this helps. Let us know if you need more assistance.

• Cannot install updates. Error code constant of 0x8007001f.

  IE8, SP3 and windows reinstalled update. Still can not install new updates.

  Hello

  (1) update that you are trying to install?

  (2) what is you get the exact error message?

  (3) remember when you make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run Microsoft Fixit
  The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2:
  You can also try the steps in the link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756/

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Note: It is very important that you back up all your personal data before going ahead with the upgrade on the spot.

  Follow the article below to learn more:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941#advmethodC

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• cannot install update security for Windows XP (KB2686509)

  cannot install update security for Windows XP (KB2686509)

  Hello, gsfl Jg,

  Open Windows Update and check if KB2686509 and KB2676562 are or are not installed.

  When you tried to install the update, you would have received an error code.  Please return this zip code which lies in Windows Update.

  Why this update is offered again several times?

  Windows updates are revived until the update is installed on your computer. If this update is already, perhaps an installation failure has occurred. Check log files to install KB for the error codes. For example, the log file of installation KB for this security update would probably "C:\Windows\ KB2686509.log"
  For more information about how to resolve these problems, click on the number below to view the article in the Microsoft Knowledge Base:

  958051 (http://support.microsoft.com/kb/958051/) you receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  What should I do if the installation of this update fails with the error "0x8007F0F4"?

  If you receive the "0x8007F0F4" error when you try to install this security update, follow these steps:

  1. Open the Faultykeyboard.log file that is located in the folder %windir%. This log file contains information about the registered keyboard layout files that are not in the folder % Windir%\System32. The log file will resemble the following:
     Keyboard1.dll.\Layoutfiles\keyboard2.dll C:\Windows\System\Kbda1.dll

     Note In this example, the first entry is just a file name. The second entry includes a relative path with the name of the file. The third category includes a full path of the file.

  2. Copy the files that are listed in the Faultykeyboard.log log file in the System32 folder.

  Note Contact Microsoft technical support if you can't find the Faultykeyboard.log file.

  http://support.Microsoft.com/kb/2686509