Konica Minolta PagePro 1350W compatibility with Windows 7, appears as "Unspecified" device

Similar Questions

• How can I find the Konica Minolta pagepro 1350w drivers for Windows Vista?

  I have Konica Minolta PagePro 1350w printer.

  I'm able to printfrom my windows XP laptop but not from my desktop Windows Vista Home Premium. He used to work on Vista before. I don't know what has changed. Original printer disk has no drivers for Vista. I uninstalled and reinstalled the printer on my desk. He installed the deivers ok since my drive hard but would not print! I get no error messages either. Microsoft FixIt has not found any problem.

  Any suggestions for the next step? Enjoy.

  Thank you.

  Harshad

  Hello

  It is Minolta information for this printer.

  http://printer.konicaminolta.com/support/current_printers/pp1350w_sup.htm#drivers

  Please read this link too about the availability of drivers:

  http://www.konicaminolta.EU/en/business-solutions/products/Office/discontinued-products/laser-printers/black-white/PagePro-1350W/downloads.html

  See you soon.

• Konica Minolta PagePro 1350W Driver for Vista 32 bit

  Anyone know where I can get the Konica Minolta PagePro 1350W Driver for Vista 32 bit Please?  I downloaded a driver for Konica, but it does not work.  I am trying to install my printer on Vista for the first time, and the link to Konica does not help!  Thnx

  LC OK

  I found the problem.  My coil was not managed properly; This is the reason why the file wouldn't install.  So I decided, Konica, it is the right file. The PDF file is misleading.

  I'm all set.  Thank you for your patience with me and your help!

  Aspen

• Konica-Minolta Pagepro 1350W driver Windows 7 64 bit

  Can someone tell me how I can use my Konica-Minolta printer on a new laptop with Windows 7 64 bit.  None of the drivers provided on the work amd drive there not on the site of Konica or the Microsoft website.  Please help me if you can.  The printer, I bought a few years ago and I just took this new out of the box.  Thank you

  E-mail address is removed from the privacy *.

  This printer is not compatible with Windows 7, if you think that Windows 7 Compatibility Web site. However, I have seen in other forums that people have had it works simply by plugging it automatic installation of Windows drivers.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Konica Minolta PagePro 1350w driver for El Capitan

  Hello

  Hoping for help.

  I have looked everywhere and found a discussion closed since 2007.   Our Konica PagePro 1350W is a great printer which works but not on my Mac faithful.  I'd like to get drivers that work w El Capitan.

  I tried to download the files of the 2007 discussion, but they work well not sure I could do something wrong (always a good option).

  Thank you.

  RobertsMom

  I'll ask on the subject being relocated in something to do with El Capitan and not OSX 10.4 itself dates back to the time of your printer, but because your printer is not an Apple printer there not really nothing to do with OSX Tiger.

  Do not expect necessarily pilots to survive 8 years to modernize the computer system. A lot of General software dating back to 2007 does not work under El Capitan. Most of the printers themselves do not almost last time and in General if you want to use a printer from 2007 to use computer hardware and software that date also 2007 + / 4 years.

• How can I get my Konica Minolta 2430 to print with os 10.11.3 on my new mac mini

  How can I get my Konica Minolta 2430 to print with os 10.11.3 on my new mac mini? I have seen several threads form 2013 on 10.9. someone knows something about 10.11.3. I'm a novice, was fiddling with used Mac for several years, but don't want to lose a lot of time to understand. Thanks for any ideas you may have.

  Konica says that the printer is taken in charge by El Capitan?

  Konica has drivers for this printer? If it's an old printer, it is not supported in El Capitan

  Maybe:

  Apple may provide drivers for older printers?

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• HP pavilion dv6-3280 ca: compatibility with Windows 10

  Hello

  Just upgraded to Windows 10.

  Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

  and "ATI Mobility HD 4200 Series"

  I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

  and "no driver installed" for the ATI card

  Thank you

  RJLX

  Hey @rjlx ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

  If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

  If this is not enough, you need to restore the laptop to a previous version of Windows.

  Thank you.

• WD5000H1U car has become a legacy product and we have no plans to create a firmware for compatibility with Windows 7. __

  I got this response from Western Digital on my old hard drive My Book Essential Extermal.

  Thank you for your response.

  Really, I apologize for the inconvenience that you are experiencing currently. Unfortunately, this disc became a product and we have no plans to create a firmware for compatibility with Windows 7.

  I hope that we have met your expectations today and that you are satisfied with our service. If you have any other questions, just reply to this email and we will be happy to help you further.

  Sincerely,
  Nestor V.
  Western Digital Service and support

  If you encounter any problems with your external hard drive, this could be the problem.

  Well, don't know how it happened, but it works.

  Last night I went on the Web site of WD and downloaded

  1 EssentialEliteFirmwareUpdaterv1.032_1.0.7.4
  2 WDSmartWare_Software_Updater_For_Windows_1_0_12

  After I did it, I unplugged all of my other drives and I tried everything again with the missing disk, but it still does not.

  This morning, I reconnected all of my readers, and he started to read the missing disk.

  The version of the driver file is now
  6.1.7600.16385(win7_rtm090713-1255)

  I'm not sure what did the trick, but maybe this will help someone out there.

  Good luck!

• Reference Dell photo printer 720 compatibility with Windows 8

  Is Dell photo printer 720 compatibility with Windows 8. ?

  You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

  It is not compatible with windows 8 - see THIS

• CS6 Compatibility with Windows 10

  I bought the whole adobe CS6 suite and I really need to update my computer, but I fear that my adobe software will stop working. I saw where cloud applications are compatible, but I didn't know where this question is still answered. Can someone please answer this question as Adobe support is unable to connect with.

  TIA

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  -so if you have an older, program update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or to run it as Administrator http://forums.adobe.com/thread/969395 to assign permissions FULL said... yet, but it is sometimes necessary for Adobe programs

• Adobe Acrobat 5.0 compatibility with Windows 7

  Adobe 5.0 compatibility with Windows 7

  It is not compatible and will not work.

  Mylenium

• Konica Minolta reported that a driver Windows 7 will be available in July 2010. It's February. What should I do to print until then?

  Has anyone found a driver that loads to run their Magicolor 2300W printer?  I tried the disc that came with the printer, Vista drivers downloaded, tried to add drivers additional w64 XP.  None of them have worked.  I even tried to close the numbers of models known to Windows 7 and none of it works.  Now, my only recourse is to print a file pdf or something stupid like that and move the files to a computer printer driver works and the feel of this place.  It's crazy!  I hope that someone from Microsoft or from Konica Minolta is montitoring that.

  This is not the problem of Microsoft. Drivers are the responsibility of the hardware manufacturer... Looking for a new printer...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Schedule the Winzip files and 'compatibility' with Windows 7 - HELP!

  Hello

  I have recently upgraded to Windows 7 from XP.  I have an online game (war hammer) with some friends and need to download a few files of curse.com to upgrade my interface in this game.  Under XP, things has worked well, but here's my problem with Windows 7.

  Everything by searching my directory of war hammer I found it under Program Files (x 86) vs my normal method on my desk or in the program file.  I keep Electronic Arts Warhammer Online - Age of Reckoning - Interface - Addons.

  From here, I have the head on the Curse.com website and save the files under this folder.  Then, I went to winzip and extract use them all in the game (war hammer).  When I tried to see the files in that folder, I was surprised to see 'nothing' listed!  I called a friend to walk me through the way he his under windows 7 and for some reason any, he has his records and mine are gone.  However, there is a button at the top that says: "compatibility files"?  If I click this button then all of my files show but for some reason any, that they cannot be played in the game to do what I need to do...

  Thoughts?

  Help!

  Hi Zhadum,

  As the game is compatible with Windows 7, it is indicated herethe link of Microsoft Compatibility Center. It should work in normal mode; I suggest you contact the manufacturer of the game, as the issue seems to be with the game from the link below.

  http://www.warhammeronline.com/forums/

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think