kWFPStaticTextKey - the Expression must be numeric - WriteFishPrice DollyX start-up

Similar Questions

• Share the expression in step.result.numeric and locals.variable

  Hello together,

  I'm new in the world of TestStand and I have a simple question.

  How can I share the output of a step between the expression step.numeric.result (NumericLimitTest) and a variable 'local '? I need the output of a time step value for the comparison of the limit and once to give to the next step.

  Thank you

  Dusan

  
  

• Sequence Analyzer rules: Expressions must evaluate to a value of the expected type

  Sequence Analyzer reports all sorts of errors because I'm indexing of the results list.

  1. For example: error in argument 2, 'Locals.ResultList [Locals.idx] .status is 'Error',' in the call to the function of the expression "AnyOf. Name of variable or unknown property 'Locals.ResultList [Locals.idx].status'.

     This is perfectly valid at run time but the parser recognizes that, probably because the list starts with the vacuum.

     Is it possible that I have clean code to reduce these error reports?

     I tried to create a "Result" element in a Foreach loop, but could not find a type of 'Result' anywhere.

  2. In addition, under the same article, array off limits. index is given as a problem when I define a table instead of 0.1 1.2 terminals so that I can use buttons hit on the index in the array.

     It's also quite correct but marked as an error.

  3. Another rule that makes me crazy is all sequences of escapement used in expressions must be valid, for example:the expression "StationGlobals.RootPath & ' Configuration\VP Automated Test parts and limit Config.txt" ' is meant to be a path. "Use '-' instead of"."

     I don't know what, if anything, I should fix in the string because this file get opened correctly.

  Can someone suggest ways to "fix" or "clean" these errors? I would prefer not to have to justify why I do nothing on errors reported by the parser to my QA group.

  You can avoid the error of the Analyzer by something similar to the following:

  Locals.AnyErrors = PropertyExists ("Locals.ResultList [" + Str (Locals.idx) + "] .status")? (Locals.ResultList [Locals.idx]. GetValString("status", 0) == "Error"): false

  To create a copy of the item as a local variable, you can do the following:

  Locals.SetPropertyObject ("myelementVar", PropOption_InsertIfMissing, Locals.ResultList [Locals.idx]. Clone ("", PropOption_CopyAllFlags |) PropOption_DoNotShareProperties))

  Note that this property will exist only at run time, if you create a placeholder variable in it to change time and it will get replaced by this expression during execution.

  Hope this helps,

  -Doug

• ORA-01790 Expression must have the same data type

  select  'sal' as A, sal as B, sal as C, sal as D
  from
  (Select sum(sal) sal from emp)
  union all
  select
    'comm', comm, comm, comm
  from
  (Select sum(comm) comm from emp)
  union all
  select rpad('-',10,'-') ,rpad('-',10,'-'),rpad('-',10,'-'),rpad('-',10,'-') from emp;

  Get the following error when you run the above query. I know it's because of the rpad('-',10,'-') what is the best way to achieve the expected results
  
  I would like to have the result with underscore. What is the best way to achieve this.
  
  Expected results:
  I am developing report.
  I need to have the following oupput.
  How can I put underscore after the recordings.

   A              B        C             D        
  sal         29025       29025     29025
  comm     2200    2200     2200
  --------------------------------------------------

  SQL> select  'sal' as A, sal as B, sal as C, sal as D
    2  from
    3  (Select sum(sal) sal from emp)
    4  union all
    5  select
    6    'comm', comm, comm, comm
    7  from
    8  (Select sum(comm) comm from emp)
    9  union all
   10  select rpad('-',10,'-') ,rpad('-',10,'-'),rpad('-',10,'-'),rpad('-',10,'-') from emp;
    'comm', comm, comm, comm
            *
  ERROR at line 6:
  ORA-01790: expression must have same datatype as corresponding expression
  
  SQL> select  'sal' as A, to_char(sal) as B, to_char(sal) as C, to_char(sal) as D
    2  from
    3  (Select sum(sal) sal from emp)
    4  union all
    5  select
    6    'comm', to_char(comm), to_char(comm), to_char(comm)
    7  from
    8  (Select sum(comm) comm from emp)
    9  union all
   10  select rpad('-',10,'-') ,rpad('-',10,'-'),rpad('-',10,'-'),rpad('-',10,'-') from emp;
  
  A          B                                        C                                        D
  ---------- ---------------------------------------- ---------------------------------------- ------------------
  sal        29025                                    29025                                    29025
  comm       2200                                     2200                                     2200
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  
  A          B                                        C                                        D
  ---------- ---------------------------------------- ---------------------------------------- ------------------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  ---------- ----------                               ----------                               ----------
  
  16 rows selected.
  
  SQL> 
  

  SY.

• Satellite P100 - after reinstallation, I don't have the express media player

  I just reinstalled my laptop. Windows XP. All right. But the express Media Player software was not on the disk to repair!

  Do I need other software to reintall disc, or I can download somewhere? Or just the seller does not give this cd when I boght the laptop?

  So, how can I find the Express media player?
  SB:

  Hello!

  As said sanremo express media player is not in the recovery disc included. You must download.
  By the way I use VideoLAN to play my audio and video files. It s freeware, small and fairly easy to use. Try it.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com/-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite U205-S5002: cannot retrieve the Express Media Player after upgrading the HARD drive

  So I bought just a new Toshiba Satellite U205-S5002 I love it. One of the great features that interest me was the Express Media Player feature.

  My first step was to upgrade the hard disk and 160 GB and 2 GB ram.
  I placed the disk and ram in my old laptop and sold it.

  Before that I did, I made a copy ghosts and ghost of the hard drive to the new drive. Well come to find out...

  Toshiba is not provided with this software preinstalled, so I followed the instructions to burn my recovery disk Express Media Player and the boot on the new disk.
  So this is where the saga begins...

  After 15-20 seconds, I get a soothing blue screen (NOT of blue BSOD you mind) who says:

  /!\
  An error occurred during the recovery of "Express Media Player".
  -------------------------------------------------------
  Please pick up the image again from the beginning.
  Press any key to exit.

  It is typed exactly as it is on the screen. So, I see some other forums saying: you must have the free space of the disk so I resize the partition that allows 200 MB of space. Always the same... then try 2 GB even... then the 50 GB, same problem...

  OK, so obviously not a question of space. I read while I might need to erase the drive... so I delete the partition, this same error... then I run the recovery disk and tell him to wipe the drive, wait 1 1/2 hour, it ends. No dice! So I decide... ok... Well lets try another disk... I have restored my ghost image... and burned the image again... same question... so I decide to the recovery disk and I'll try to reinstall windows in the factory and make a record...

  Well, it does not work as well as you think... the image is incomplete... windows works fine... but the c:\Toshiba\ExpressMediaPlayer folder is empty!

  I'm happy that I have ghosts my original directory. But I decide allows to Express Media Player a shot more now that I have restored to factory... always the same error... I then decide a trial more... I'll erase drive 1.5 hours, I'll restore from toshiba dvd provided but leaving plenty of space at the end 2 GB (I have a lot about people who tell you to base just around 200 MB)

  5 hours later... moment of truth... Well Yes you guessed it... I don't know anything else to try... I have a bad image?
  You need one that I can download what has worked for them for sure? Or have - I have completely found myself by replacing the HDD with after market and which is originally a kind of compatibility issue?

  Thank you in advance.
  Gabe at supergeekz dot com

  Hello

  It s a great story!
  I put t know how to start so maybe first some info on the Express media player.

  As you said, and has already proposed the Express media player has been preinstalled on the second partition.
  If you want to install this media Express on the HARD disk drive, 150-200 MB of free space must be available. This free space must be on the end of the HARD drive and there must be unallocated.
  To get these free space on the HARD disk, 3 third-party products should be used as for example the Partitions Magic 8!

  I'm not going to write a story how to recover the Express media player because Toshiba has already created useful documents, which described complete installation!
  I found these documents in the knowledge base of computer Toshiba:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2

  * Check this box: *.

  [Why Express Media Player fails to run after replacing HARD drive or recovery? | http://support.Toshiba-tro.de/KB0/FAQ5C018T000FR01.htm]

  [How to recover a laptop Expert Mode with 2 Partitions and Express Media Player? | http://support.Toshiba-tro.de/KB0/TSB58014O0008R01.htm]

  Hope I could help you.

• Satellite M70: How to get the Express Media Player feature?

  I M70, but I formatted it once I bought it. Now, you could tell me how to recover the function of Express Media Player? There is no setup.exe file in the Express Media Player recovery CD.

  Thank you

  Hello Weimin

  In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.
  You can't run Express Media player after performing a recovery.

  Should at least 150-200 MB of available free space on the HARD drive.
  This free space must be on the end of the HARD drive and there must be unallocated.
  To start the installation, you must boot from the recovery Express Mediaplayer CD

  Good bye

• Change the precision of the express vi table

  Hello friends.

  I have a problem.

  I use an Express VI to create a Table.

  If you see an example below, he has a table with precision set to 2.

  Now if I want to change the precision, I must right click, go to properties and make the change in accuracy.

  Is there a way to change the accuracy by programming. I couldnot see any node property for precision adjustment.

  Can someone help me?

  PS: I'm not very familiar with Labview, so I would stick to screw Express. I know that they are not preferred by the senior programmers, but they are somehow very easy and convenient to use for newbies like me.

  Rgds,

  Rohit Chawla.

  Not possible in Express VI itself, but you can add your own code between the Express VI and the resulting table. See that attached to modified VI to get the idea.

  See you soon,.

  Cerati

• Need to convert a local 'digital' to a type value string using the browser of the expression.

  I'm trying to convert a local "numeric value" to a string via the browser of the expression to provide a string argument.  I'm currently looking through the options of expression browser, but I can't find any type of function 'ToString()' Number.

  Hi you should try this:

  Str (people of the country. MyNumeric)

  Concerning

• I have the product key number I purchased through the Express upgrade. Is there a link for the download of Windows 7 professional free?

  I bought Windows 7 Professional upgrade through Express during which I contain the product key number... It seems to me not to be able to communicate with them? I need to re - install windows 7 and need a download for professional during which I contain the number of product for a 64-bit key.

  NO MATTER WHAT DIRECTION WILL BE APPRECIATE

  Kevoogle

  Alessandri keV

  Discussions were merged.

  Deleted duplicate.

  You cannot use a Windows 7 Professional anytime upgrade product key with reinstall media, it can be used only to upgrade license of qualification basis where you bought the upgrade in the first place (Starter, Home Premium).

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
  ------------------------------------
  This is how the recovery partition is accessible to most popular brands...
  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.
  For HP, press F11 directly after switching on the device
  For LG, press F11 directly after switching on the device
  For Toshiba, press and hold "0" BEFORE and during the power upward
  For Acer, press and hold ALT + F10, as soon as you see the logo
  For Asus, press F9, as soon as you see the Asus logo.
  For Samsung, press F4 to the power upward...
  For Fujitsu, press the F8 key directly after the power
  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Java code in the expression editor

  The Java tab in the expression editor makes me think it should be possible to write a bunch of lines of code java, somehow but no matter what I try it always refused. The java code only I got to work was create a set command, and then write the right side a

  var x = something;

  statement. Since there is no try/catch, if, while, instructions etc. in the java tab, should not be possible to use somehow? And if so, what can they be used in (quite apparently the game is bad)?

  I use IPCC 4.5 with Premium license and I am able to write java code inside the set command.

  The java code must be writing in brackets {}; for example

  {

  try {}

  int i = 0;

  int result = 0;

  for (i = 0; i<>

  result = result + i;

  }

  return the result;

  } catch (Exception ex) {}

  Returns - 1;

  }

  }

  Hope this helps.

  Stefano

• Control of the expression / Slider control works with the percentage?

  For example, I want to do something with keyframes, so opted to use "regulator toslide ," but is now defined by the "cursor", if I put the wiggleexpression (2.5) and place 2 on the regulator to behind the scenes, knowing that the value will be replaced by the value of "slider" so in the case of the control slide was "10". , would look like this: wiggle (10.5)

  But I want to know is if the control of the expression of origin by a percentage and not a replaced, for the value of the slider control.

  Thank you!

  If the amount of your max value is set, then by creating the cursor to drive the percentage of this number requires a few simple calculations.

  Degree of accuracy desired percentage to be hover would require a small change that in mathematics.

  This example allows you to animate a percentage of '2' frequency (maximum value) in agitation, but allows the range '5 ': stay

  mV = 2; maximum value

  PERC = (effect ("Slider Control")("Slider")/100);  makes a percentage since the slider value by using 0-100

  Wiggle(MV*PERC,5)

  explanation:

  There are several ways to do so.

  The slider is unlimited, so you can define OTHER rules in your expression, but to keep it simple:

  You must multiply your maximum value of your "perc."

  However, we want to transform the number 'perc' in a fraction.

  A simple way is to divide the amount of cursor by 100.

  Multiply your max value with the result of your cursor (/ 100) and you have your percentage.

  (* You can use fractional numbers to animate instead of this, but the cursor is easier to control in this way.)

• Is there a shortcut to CONFIRM the expression once inserted?

  y at - it a shortcut to CONFIRM the expression once inserted? Without using the mouse.

  Press enter on the numeric keypad.

• Use the commands of the expression to preset animations...

  I have several preset animations that contain expressions with expression control sliders. When I apply the animation preset to a layer, it adds the commands of expressions in the effect controls panel as usual and everything works fine.

  However, if I add another animation preset to the same layer there is no add a double set of options for expressions (with a number appended to the name 2) instead of just replace existing ones. I realize that the preset detected a duplicate name, that's why the 2 has been added... but the real expression has not been updated to use the new name of control of expression. So basically, the expression still refers to the original name and completely ignores the game duplicate of the controls in the expression that was created.

  If anyone knows a way to get an animation preset to replace or upgrade options for existing expressions that use the same name?

  You must rename your controls of expression. This will solve the problem if all names are unique. If you apply the same predefined animation twice for the same layer and this preset contains options for expressions then you will get duplicate with the added number names. There is no way around that.

• After my reboot of the iPhone, the iPhone must be re enabled and why?

  After my reboot of the iPhone, the iPhone must be re enabled and why? And the iPhone had no problem in the past. I need help!

  You have a SIM card installed? If not, install one. Then try to activate it.