Sequence Analyzer rules: Expressions must evaluate to a value of the expected type
Sequence Analyzer reports all sorts of errors because I'm indexing of the results list.
- For example: error in argument 2, 'Locals.ResultList [Locals.idx] .status is 'Error',' in the call to the function of the expression "AnyOf. Name of variable or unknown property 'Locals.ResultList [Locals.idx].status'.
This is perfectly valid at run time but the parser recognizes that, probably because the list starts with the vacuum.
Is it possible that I have clean code to reduce these error reports?
I tried to create a "Result" element in a Foreach loop, but could not find a type of 'Result' anywhere.
- In addition, under the same article, array off limits. index is given as a problem when I define a table instead of 0.1 1.2 terminals so that I can use buttons hit on the index in the array.
It's also quite correct but marked as an error.
- Another rule that makes me crazy is all sequences of escapement used in expressions must be valid, for example:the expression "StationGlobals.RootPath & ' Configuration\VP Automated Test parts and limit Config.txt" ' is meant to be a path. "Use '-' instead of"."
I don't know what, if anything, I should fix in the string because this file get opened correctly.
Can someone suggest ways to "fix" or "clean" these errors? I would prefer not to have to justify why I do nothing on errors reported by the parser to my QA group.
You can avoid the error of the Analyzer by something similar to the following:
Locals.AnyErrors = PropertyExists ("Locals.ResultList [" + Str (Locals.idx) + "] .status")? (Locals.ResultList [Locals.idx]. GetValString("status", 0) == "Error"): false
To create a copy of the item as a local variable, you can do the following:
Locals.SetPropertyObject ("myelementVar", PropOption_InsertIfMissing, Locals.ResultList [Locals.idx]. Clone ("", PropOption_CopyAllFlags |) PropOption_DoNotShareProperties))
Note that this property will exist only at run time, if you create a placeholder variable in it to change time and it will get replaced by this expression during execution.
Hope this helps,
-Doug
Tags: NI Software
Similar Questions
-
sequence Analyzer: data transfer between the Analyzer rule one sequence to another
Is there a way by which I can send data to the Analyzer rule a sequence to another.
I've created rules to count the number of SCOPE, step REQUIREMENT TEXT step, step in the PROCESS
Now, I want to create another regulation that reads the values of each of these rules
Tah44-
One of my colleagues brought a different, probably better idea to my attention this morning:
Use the AnalysisContext.GetRuleAnalysisData method to access the data of other rule analysis: http://zone.ni.com/reference/en-XX/help/370052P-01/tsref/infotopics/sa_creating_analysis_modulesimpl...
-Jeff
-
TestStand 2016 - sequence Analyzer
When I run any order, I get this:
Message: Internal error: could not load the analysis module "NIAnalysisModules.dll:NIAnalysisModules:ValidateEnumerationValue":
Error loading module:
Could not find the 'NIAnalysisModules::ValidateEnumerationValue(struct TSAnalyzer::AnalysisContext *)' function in the DLL (or plug-in) ' C:\Users\Public\Documents\national instruments\TestStand 2016 (32-bit)\Components\Analyzer\NIAnalsisiModules\NIAnalysisModules.dll'.)
File:
Geographical area:
Rule: Internal error
Description: Sequence Analyzer uses this rule to report internal errors that occur during the analysis. These messages
usually indicate a serious problem with a component of the sequence monitor. Information to
the owner of component or National Instruments. You cannot disable this rule.
How can I fix it?
The file (NIAnalysisModules.dll) TestStand 2013 is not compatible with TestStand 2016 and probably should not be copied by the migration tool.
-
Hi all
I was reading some use of Abu documentation Oracle operator '+' to rule expressions. But it seems that I can't do this.
I want to do: ruleExpression = Order.priceInfo.amount + Profile.parentOrganization.orgUsedBudget > Profile.parentOrganization.orgBudget
The orgUsedBudget and the orgBudget are double values are populated correctly.
But it gives me a java.text.ParseException: unrecognized token: +.
Can anyone suggest how can I do this in this expression of the rule?
Thanks in advance.
Hi all
I solved the problem by creating a new RuleEvaluator, getting the left and the right and performs the operation of ' + '.
Good bye.
-
ORA-01790 Expression must have the same data type
Get the following error when you run the above query. I know it's because of the rpad('-',10,'-') what is the best way to achieve the expected resultsselect 'sal' as A, sal as B, sal as C, sal as D from (Select sum(sal) sal from emp) union all select 'comm', comm, comm, comm from (Select sum(comm) comm from emp) union all select rpad('-',10,'-') ,rpad('-',10,'-'),rpad('-',10,'-'),rpad('-',10,'-') from emp;
I would like to have the result with underscore. What is the best way to achieve this.
Expected results:
I am developing report.
I need to have the following oupput.
How can I put underscore after the recordings.A B C D sal 29025 29025 29025 comm 2200 2200 2200 --------------------------------------------------
SQL> select 'sal' as A, sal as B, sal as C, sal as D 2 from 3 (Select sum(sal) sal from emp) 4 union all 5 select 6 'comm', comm, comm, comm 7 from 8 (Select sum(comm) comm from emp) 9 union all 10 select rpad('-',10,'-') ,rpad('-',10,'-'),rpad('-',10,'-'),rpad('-',10,'-') from emp; 'comm', comm, comm, comm * ERROR at line 6: ORA-01790: expression must have same datatype as corresponding expression SQL> select 'sal' as A, to_char(sal) as B, to_char(sal) as C, to_char(sal) as D 2 from 3 (Select sum(sal) sal from emp) 4 union all 5 select 6 'comm', to_char(comm), to_char(comm), to_char(comm) 7 from 8 (Select sum(comm) comm from emp) 9 union all 10 select rpad('-',10,'-') ,rpad('-',10,'-'),rpad('-',10,'-'),rpad('-',10,'-') from emp; A B C D ---------- ---------------------------------------- ---------------------------------------- ------------------ sal 29025 29025 29025 comm 2200 2200 2200 ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- A B C D ---------- ---------------------------------------- ---------------------------------------- ------------------ ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- 16 rows selected. SQL>
SY.
-
kWFPStaticTextKey - the Expression must be numeric - WriteFishPrice DollyX start-up
Getting started - PAM:
I'm 4.4 step: Add a StaticTextWidget resource to your dialog resource
StaticText widget resource
StaticTextWidget
(
kWFPStaticTextWidgetID, / / WidgetId
kSysStaticTextPMRsrcId, / / RsrcId
kBindNone, / / binding framework
Framework (150,16,190,36), / / frame (l, t, r, b)
kTrue, kTrue, kAlignRight, / / Visible, Enabled, alignment
kDontEllipsize, / / do not add ellipses
kWFPStaticTextKey, kTrue, / / text
WidgetID for shortcut ctrl
kWFPTextEditBoxWidgetID
),
However they do not compile due to the error below: it seems to complain about kWFPStaticTextKey that I defined in the .h file as specified in the start-up.
# Error: Expression must be numeric Error 1 error R32741: # Error: Expression must be numeric. c:\Indesign\Adobe SDK\source\sdksamples\WrFiPr\WP.fr InDesign CS5.5 313 WriFiPr Any ideas?
Hello
your line
kWFPStaticTextKey, kTrue, / / text
must be
kTrue, kWFPStaticTextKey, / / text
Markus
-
Set the value of the parameter in the call sequence by programming
Is there a way to set the value of the parameters of a call sequence with a vi with the context of the sequence in the order which is called? Cases not the same subseqence with a vi in the mainsequence maybe?
In your VI, I think you should be able to set the value of Step.TS.SData.ActualArgs.paranumber.Expr to the value of the setting that you want. (This property is visible in the Variables pane, only if you have configured the Options of Station to display hidden properties). Note that the purpose of the step should refer to the sequence of your call step. Also, remember that the property represents an expression, so if you want to pass the value 33, you must enclose the value in quotes ("33").
Jeff
-
All dimension values must be single line values
Hi all
I have a dimension long_description attribute mapped to a column of text that contains a character "/ n". When I try to load dimension I get following error.
An error occurred on the server
Class of error: failure of the Express
Server error descriptions:
INI: error creating a generic Manager definition to < BuildProcess > TxsOqConnection::generic
INI: XOQ-01600: OLAP DML error "ORA-34052: all the dimension values must be single line values." while executing DML 'SYS. AWXML! R11_COMPILE_ATTRIBUTES('TEST.) DIMENSION') ', generic for TxsOqStdFormCommand::execute '.
If I delete the mapping between my column of text in the description attribute long size loads very well.
It was happening because my text column contains several lines? text seems valid for reporting purposes (I mean having several lines)
Thank you
Dietsch.Analytic workspace dimensions do not support dimension members that contain new lines. This assumption is so integrated in language OLAP DML that it is difficult to see how it could ever be changed. Therefore, you cannot map a level (or hierarchy) key to a column that contains values to the new lines. But in your case you map an attribute, not a level key, so the error message is confusing. The problem is that your long description attribute is "indexed", which means that it is implemented using a DIMENSION and a RELATIONSHIP rather than a VARIABLE. To illustrate, I created a dimension named TEST with two levels, A and B, and one attribute, LONG_DESCRIPTION. The page of an attribute in AWM has two check boxes 'Create columns in views level attribute' and 'Index' that control how the attribute is being implemented.
This is what is created in the AW if both are false.
->listnames like '%TEST%LONG%' 1 VARIABLE --------------------- TEST_LONG_DESCRIPTION
This is what is created if "Index" is checked.
->listnames like '%TEST%LONG%' 1 DIMENSION 1 VARIABLE ---------------------------- ---------------------------- TEST_LONG_DESCRIPTION_INDEX TEST_LONG_DESCRIPTION_STORED 1 RELATION ---------------------------- TEST_LONG_DESCRIPTION
And here's what you get if you check "create columns for the level attribute of views."
->listnames like 'TEST%LONG%' 2 DIMENSIONs 3 VARIABLEs ------------------------------ ------------------------------ TEST_A_LONG_DESCRIPTION_INDEX TEST_A_LONG_DESCRIPTION_STORED TEST_B_LONG_DESCRIPTION_INDEX TEST_B_LONG_DESCRIPTION_STORED TEST_LONG_DESCRIPTION 6 RELATIONs ------------------------------ TEST_A_LONG_DESCRIPTION TEST_A_LONG_DESCRIPTION_HIER_U TEST_A_LONG_DESCRIPTION_UNIQUE TEST_B_LONG_DESCRIPTION TEST_B_LONG_DESCRIPTION_HIER_U TEST_B_LONG_DESCRIPTION_UNIQUE
The thing to note is that if you check one of these boxes, then your attribute is implemented by using a dimension of AW and AW relationship. This gives a good performance, but imposes the limitation that your attribute values cannot contain newlines. The obvious solution is to uncheck both boxes so that your attribute is implemented as a VARIABLE. If you absolutely have indexed attributes, so I guess you can use the SQL REPLACE function to change the new lines in escaped to the mapping layer
GLOBAL > select REPLACE('a 2 b', ' 3 ', 4 '\n') 5* from dual / REPL ---- a\nb GLOBAL > select REPLACE('a\nb', '\n',' 2 ') 3* from dual / REP --- a b
You must convert the escape sequence in a new line endangered.
-
How can I set Up Airport Express with an existing router/modem from the ISP
I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer. I suggest you to connect the printer to the Airport Express A1392 Epson) via a USB port to enable the AirPrint features. However, I guess the Airport Express must be an ethernet to the modem/router ISP connection and then use the Epxress airport more convenient than my wireless router.
Issues related to the:
1. do I need to turn off the function the ISP router's wireless when I plugged as stated above? So I wait.
2. as the Airport Express only has one ethernet port I assume that I can connect my other ethernet connections using a hub 4 ports connected to the Airport Express Terminal. It will be always possible to use other ports ethernet on the modem/router ISP as well?
Doug
I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer.
You may have received incorrect information, because a non-AirPrint on the USB port on an AirPort Express Terminal... or any other router from Apple also printer... do not make the AirPrint-compatible printer.
You want to continue nevertheless to check that this is true?
The AirPort Express can connect to the network wireless router using a wireless connection... or... it can connect to one of the router's Ethernet ports using a wired Ethernet connection.
Wired connections are always preferable wireless if possible for your Express. Turn off the wireless router is not necessary if you want to connect to the Express using an Ethernet connection.
-
Mr President.
How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?
Concerning
For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html
You already have ways to use the sequence.
How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.
Thank you
-
Is it possible to specify more illustrator with angles? If I type 6.713, goes to 6.71. It must be 6.713 to complete the circle perfectly. A plug-in, perhaps?
PG,
There is a small inaccuracy in the use of 3.14 for PI (1/2000).
But the 6,684 angle seems to be an arbitrary angle defined by a certain arc and RADIUS, no matter what result to divide a circle into regular pieces, is that correct?
I just did a test which you can also try: drag a line with the line Segment tool, then object > transform > rotation insert 10/3 ° (the dialog box indicates 3.333), then repeat twice, then drag a line on top (Smart Guides say anchor at both ends), and then double-click the Segment of line on the artboard tool to express the angle (of the three rotations of 10/3 degrees) , and it's 10 degrees, No 9.999, is precise and not influenced by the flare in the area.
-
Can set the default value in the field with the rule
I have a rule to set the xWebStartDate to dateCurrent(), but it does not work. I disabled all other rules, so there is no conflict. This rule is only to try to fix the date of xWebStart, nothing else.
'Use the activation of rule condition' is checked. I selected 'Action of use' and 'check in Selected. I have added the xWebStartDate field and I have a default custom
< $dprDefaultValue dateCurrent () = $ >
Thus, it is for content that already exists and someone is to check in a new revision.
I know that my rule works, because I added the dDocAuthor field and set it to "infOnly" and that works. This problem occurs if the action is updated also. But for check-ins again, I put the xWebStartDate to dateCurrent successfully.
Update: it's existing content, which already has a xWebStartDate. The rule must replace the existing value.
Edited by: ironarm February 1, 2013 17:58In your case, you cannot use default value for the new revisions, because your content is already a value for the metadata field.
Alternative:
(1) change your rule
(2) on the general tab, check "Use activation Condition rule" and click Edit
(3) in 'Edit Activation Condition' window, click on the tab "side effects".
(4) add the following...<$if isCheckin $> [[%or you can also use (IdcService and IdcService like "CHECKIN_SEL_FORM")%]] <$xWebStartDate=dateCurrent()$> <$endif$>
-
Hi - I am trying to open a Premiere Pro file I was working on yesterday and am getting the error message "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence... "I also tried to open the file where I had worked the day before and made no changes to, that is the source for the file modified yesterday, and it gives the same error message. Help, please. I'm on the next-to-last version of Premiere Pro, I don't have a day in the past two weeks, but I am currently in the previous version. Windows 8.1, 16 GB ram, i7 3.4GHz. Thanks in advance for any help you can offer.
Thanks for the link, John T., but it's not having the latest version of office installed CC. As I'm in the middle of a project, I have not yet put to update to the latest version of CAPRINE contagious pleuropneumonia, nor any of the other new versions. Apparently, the new version of Office CC is required for authentication. Could someone suggest to people from Adobe which is perhaps a more telling error message: "You must update your desktop creative cloud app."? Thanks for the help.
-
Number sequence for the value in the column group
I need to create a sequnece number in a column from 5, and incrementing 5, based on the presenet values in the first column. If the value in the first column changes then the sequence would start with 5 and an increment of 5.
for example: I want to generate the following output
Cat_code Seq_No
1001 5
1001 10
1001 15
1001 20
5 2001
10 2001
15, 2001
3001 5
10-3001
4001 5
4001 10
4001 15
4001 20
5001 5
6001 5
5 7001
7001 10
7001 15
7001 20
7001-25
So if the cat_code changes, the sequence number should still start at 5 and should be to generate the sequence number until the cat_code changes again.
any help apreciated.
Thank you
RahulHi, Rahul,
You can use the analytical function of the ROW_NUMEBR to generate the numbers, like this:
SELECT cat_code , 5 * ROW_NUMBER () OVER ( PARTITION BY cat_code ORDER BY NULL ) AS seq_no FROM table_x ORDER BY cat_code , seq_no ;
You must use an ORDER byclause of Analytics when you call ROW_NUMBER. If you don't really care the order, so you can ORDER BY a constant, but you still need the analytical ORDER BY clause.
-
Sys_RefCursor - expression is of the wrong type
Greetings,
I'm having a problem when compiling the code, and I wonder if you can help me.
===============
CREATE OR REPLACE PROCEDURE RA
v_cursor sys_refcursor;
BEGIN
FOR I IN 1.3 LOOP
query_str: = 'SELECT DISTINCT STAGE_NAME, SUN |
i: ' _MEMBER_NAME OF EXT_STG WHERE DIM' |
i: ' _MEMBER_NAME AS "A: %" ';
V_cursor OPEN FOR query_str; - error here
V_cursor CLOSE;
END LOOP;
END;
===============
This Code gives me the following error: rError (43.23): PLS 00382: expression is of the wrong type
I read askTom: http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:492620500346758810
This code is supposed to work, so I don't understand this error.
He also reffers that versions before 11g this code fails. However, my version is: PL/SQL Release 11.2.0.2.0 - Production
Thanks for your help.>
NVARCHAR2 (200)
>Try VARCHAR2 (200)
http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/openfor_statement.htm
documentation
>
syntaxA string literal, a string variable or string expression that represents a select (without the final semicolon) several cursor_variable_name associated lines. It must be of type CHAR, VARCHAR2 or CLOB (not NCHAR or NVARCHAR2).
>Published by: user6806750 on 09.12.2011 03:41
Maybe you are looking for
-
Portege M100 BIOS supports more than 128 GB of HARD drive?
subj Portege m100 BIOS does support HDD > 128 (137) Go?
-
Office Jet 8610: Print the faxes that I missed
How to print the actual faxes that I've not received when I was out of ink printer? I have a list of fax numbers - tried - to send faxes for me, but what I can see is the fax number, that they sent, the date and time they sent and the total number of
-
HP G7 - 1374ca (driver issue)
Hello I have a laptop G7 - 1374ca. I formatted and windows updraded to win7 ultimate. In Device Manager, it shows some drivers not available... 1 - BCM20702a0 2. PCI DEVICE 3-SM BUS CONTROLLER If you could help and guid me where I can download these
-
How can I stop Windows XP open My Documents on startuo?
Hello I just reinstalled Windows XP Pro and after installation of SP2 evert time I start Windows automatically open My Documents. How can I stop this? Thank you.
-
Installation blocked tax software
I am trying to load the tax program H & R. Vista asked me a question about the conect to the internet program, initially, I said yes (twice). Nothing happened so I thought he wanted me to say no, so I clicked No.. Now, I can't load up the software. A