l Xperia restarts when you use app Walkman with internal speaker

Similar Questions

• 40TL963 LED TV restarts when you use sky remote!

  Hello guys, my 40TL963 LED tv has started to close and restart when we use the sky remote. No matter what direct lead us!
  Its never done before. I got this TV for over 2 years now and it is just starting to happen.
  Any advice would be greatfull.
  Thank you

  Have you tried with a RESET of the TV already? (if you do not want to lose your strings, you must use the tool "ToshibaEdit" to avoid unnecessary work for sorting later, before you do this).

• Internet Explorer restarts when you use of Facebook games

  Facebook games issue IE; Wild an IE and others again different intervolts when using games that use Flash Player

  Win XP Pro.

  256Go Mem

  IE 8 Flash 10.1

  New installation of Windown (with in 4 months)

  Minimum amount of programs installed on the computer.

  I checked the video settings Execrator else, memory, and I replace the video card and still the same Problum. tried Compatibility Mode (en, tools of IE)

  I.e. will restart at different in different games times when you use the facebook games that uses Flash, sometimes I can play for a while with no problums and other times I can't get relief.

  Hi, I do not know what reboot means to you, so please describe. With XP Pro, when you click Start, you have the option of standby, turn off and restart. This is how you define restart?

  Just want to be sure that we are on the same page on the definition of the reboot.

  Thank you

  eidnolb

• Photoshop Elements 5 freezes and restarts when you use Vista

  I have a little problem with Photoshop Elements 5. When I first start the program and click on 'File' system crashes. If I wait about 30 or 40 seconds, it retrieves all and then when to work them again together is very good. It's really very annoying when you start the program, and if someone else has had this problem and knows a difficulty, I would be very grateful.

  Already tried: -.

  Uninstalling and reinstalling

  Repair installation

  Unchecking Adobe Active File Monitor V5

  None of them worked. The problem seems to be related to the performance of Vista, everything worked fine on my old XP machine.

  Now, I use an Acer Aspire 5536 with Windows Vista installed as the operating system.

  Please make sure that you have installed the PES 5.0.2 patch

• Using issue view file when you use mp3s on the internal memory and the memory microSD external

  (1) if I have folders of mp3 on the player's internal memory and on the external drive microSD memory, can I use the folder to view all folders on the 2 memorys simultaneously integrated on one list or do I have to go through the files on each memory separately.

  (1) if the answer to question 1 is Yes, then I would like to now if I can have on the internal memory and external memory records with the same name, but with different files and the player will display these folders with both files on the internal memory and the external.

  I want to know because I like to browse through the files, and if the internal memory is full, I wish I could add more files in the folders where the internal memory by making a folder with the same name on the micro sd, and I don't like to go through the files on 2 devices at the same time, just on 1 list.

  Help, please.

  Thanks in advance

  The Clip + Treaty internal and external cards in 2 separate sources, under the folder view (it is quite logical, when you think of him, and just as 2 separate cards on your computer).  And if you look at the 2 lists separately (again, just like on your computer).  When you view your files using ID3 tags, both internal and external map content is merged in 1.

  If you do not have to see 2 separate lists, you can simply keep most / all of your content on the map either internal or external (even by, if you were really dead set on it, for example get a 2 GB Clip + and then using 8 or 16 GB external with her new card).

• 5.2 Lightroom crashes when you use the spot with Wacom Intuos 5 editing tool

  Hello

  I've been using Photoshop 6.x with my Intuos 5 for almost a year and it's been great.  Recently I bought Lightroom 5.2 only to find out that when I use the spot editing tool that it freezes when I use this tool as a brush.  It starts smooth, but after brushing in my area I want to clone/heal, Lightroom seems to freeze upwards, and the spot edit tool is unusable.  I can up my pen, off the coast of the Tablet and seconds later Lightroom comes back, but the Tablet is practically unusable for me.  The mouse works perfectly well.

  I read the other posts at the end of last year 12, who walks through a few regedits and disabling some other tablet works, but none of these work for me.  Any suggestion would be appreciated.

  Thank you Ed

  Lightroom version: 5.2 [922700]

  Operating system: Windows 7 Ultimate Edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.7 GHz

  Built-in memory: 16375,0 MB

  Real memory for Lightroom: 16375,0 MB

  Real memory used by Lightroom: 429.4 MB (2.6%)

  Virtual memory used by Lightroom: 403.7 MB

  Size of the memory cache: 300,8 MB

  Maximum thread count used by Camera Raw: 4

  System DPI setting: 144 DPI

  Composition of the Bureau enabled: no

  Exhibition: 1) 1920 x 1200

  Map #1: Seller: 1002

  Feature: 9498

  Subsystem: 16031462

  Revision: 0

  Video memory: 1005

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x20

  CardID: 38040

  Direct2DEnabled: false

  GPUDevice: D3D

  MaxTexture2DSize: 8192

  OGLEnabled: true

  Rendering engine: ATI Radeon HD 4600 Series

  ShaderModel: 10.1

  Seller: AMD

  VendorID: 4098

  Version: 1002:9498:16031462:0000

  I solved my problem.  I saw an article @ com-Intuos-5-in-LR-5 http://www.lightroomforums.net/showthread.php?19694-Spot-removal-tool-doesn-t-work-with-Wa that solved my problem.

  Step 1:

  WALCOM Tablet properties

  

  Step 2:

  Click Customize and change the default line of this graph:

  

  Step 3:

  For this

  

  Step 4:

  Click OK.

  After that, my spot stopped edit gel LR 5.2 tool while I used my intuos pen 5.

  Prior to that, I also did the procedure listed here: http://forum.wacom.eu/viewtopic.php?f=10&t=8036

  So it is possible that the two must be made so that the gel to stop.  I hope this can help others.

• Crashing when you use dynamic linking with legacy

  I use Prime Minister for some time now, but I think I have background a huge loophole in the system of dynamic links. I am owner of a multi-million dollar company that specializes in searching for the answer for X divided by zero and this bug puts us thousands every day.

  The problem is when you import a first draft in aftereffects and then reimport the same Premier model, the result is 8 GB of ram wasted in a few seconds with both applications crashing. As you will guess this kind of multiplication of our R & D type is unacceptable. Please correct.

  

  Best regards, Tom Tomson @ Banana Systems Ltd.

  u mad bro?

• When you use a viewer with thumbnails widget that the viewer disappears

  When you preview in multiple browsers Safari and firefox slide show disappears and runs on a colored background. AutoPlay does not work... This widget is provided in the muse...

  Noises of this is exactly how the Lightbox widget is suppose to work. Any display of the page should show only thumbnails and then clicking on a thumbnail should open some sort of pop up with the image. There is no automatic reading with a lightbox widget.

• Satellite M50-181: OS crashes down and did a restart when you use Winrar

  Hi@all,

  I have with my M50-181 and Winrar in the past time a problem. My system hangs down and did a reboot, when I want to check in a file. I have the latest version of Winrar 3.51 and latest updates of Windows XP.

  After reboot I send the bug report to Microsoft. After that, I am eagerly to the Microsoft Web page. It is said that this accident is a product of a driver in my system that failed. But they can't tell me which driver is the cause of the accident.

  Has anyone else got the same or similar problem? Can someone help me?

  Thank you and Bravo,

  Yanick

  Hello

  What about older versions of the WinRar?
  Have you tried to install other versions?

  Never heard of problems. I also use a Winrar (older versions) and everything works fine.

• Constant need to restart when you use Windows Update

  I tried not Microsoft Update, but it's better than Windows Update?

  I'm setting up of machines and having to restart not less than 5 times after the installation of SP3.

  Surely, there must be a better way...

  I suppose that given computer of different types and brands and whatnot would put drivers on an image not working, and maybe the updates, but what about just the updates generic like service packs, security updates, patches, etc.

  If you have deployed only as an image, it would certainly cut down your time, because you would just install what is specific to this type of computer or laptop, instead of every single update

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• When you use the webcam with some Web sites, PC off

  I installed a video for jwin JC-800 on webcam on my windows xp pc. I used the disc of the included software to install drivers, etc... When using the sites web cirtain to activate the camera, such as windows live instant messaging, it stops the pc.

  The cam is also up when trying to use the "audio and video Setup" prompt Windows live instant messaging to adjust the parameters of the cam for a display of web cam or video call, although sometimes it will start and run ok on messengr - as no adjustmentsare have made to the settings of the camera video or audio. On other websites, during the implementation for video chat, the pc stops when "enable audio" is selected. Also, when turn on the cam directly from the desktop icon and try to configure the space required for video captures the pc shuts off or the programwill camera become UN-responcive and jam. I tried programs assistant camera, device and windows as well as the control panel and help centers copatability, but don't know enough to mess with the configuration of services/programs/settings on the pc to fix the problem

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• ORA-06502 when you use MAX (Column) with % TYPE

  Hello
  
  I tried to limit the problem as much as I can and have managed to isolate a particular scenario. As the structure and sensitive data, I had to come up with a scenario that I tested it and it causes the same problem occurs. The scenario is as follows
  
  Assuming that I have a table defined as follows
  
  CREATE TABLE TEST_TABLE (TEST_COLUMN CHAR (8 BYTES));
  
  and the table has only one record NZ07100S
  
  We also define a function as
  
  CREATE OR REPLACE FUNCTION
  FUNCTION GETTESTVALUE
  TEST_TABLE RETURN. TYPE % TEST_COLUMN
  IS
  TEST_VALUE TEST_TABLE. TYPE % TEST_COLUMN;
  BEGIN
  SELECT MAX (TEST_COLUMN) IN TEST_VALUE TEST_TABLE;
  RETURN TEST_VALUE;
  END;
  
  
  
  We ran the following command
  
  SELECT GETTESTVALUE FROM DUAL;
  
  and receive an error as follows
  
  Error report:
  SQL error: ORA-06502: PL/SQL: digital or value error: character string buffer too small
  ORA-06512: at "GETTESTVALUE", line 6
  06502 00000 - "PL/SQL: digital error or the value of %s.
  
  
  However, if were to change the function of the following
  
  CREATE OR REPLACE FUNCTION
  FUNCTION GETTESTVALUE
  TEST_TABLE RETURN. TYPE % TEST_COLUMN
  IS
  TEST_VALUE TEST_TABLE. TYPE % TEST_COLUMN;
  BEGIN
  SELECT TEST_COLUMN IN TEST_VALUE TEST_TABLE;
  RETURN TEST_VALUE;
  END;
  
  There is no error reported and the value nz07100s is returned.
  
  Of course, when we changed the function is
  
  CREATE OR REPLACE FUNCTION
  FUNCTION GETTESTVALUE
  TEST_TABLE RETURN. TYPE % TEST_COLUMN
  IS
  TEST_VALUE TEST_TABLE. TYPE % TEST_COLUMN;
  BEGIN
  SELECT CAST (MAX (TEST_COLUMN) AS CHAR (8)) IN TEST_VALUE TEST_TABLE;
  RETURN TEST_VALUE;
  END;
  
  No error is reported, and the value is returned
  
  However, the function in question is in the use of production since 2004. We are currently a few changes to the application and imported the backup of Oracle 10 g Oracle XE. When we try to run the function, the error is thrown.
  
  I would like to understand if this is a limitation with Oracle XE that causes this problem. It seems to me that the problem is to select the MAX value in the variable that has been set. Executing the query directly from sqlplus does not generate an error, and therefore do not feel there is an error with the SQL code. The only time that we can't get the error is with the INTO statement.
  
  Is there a way to use the function as it has been defined in production? Why the ORA-06502 error would be thrown? It does not seem to make sense to me. Would appreciate any guidance on this.
  
  
  Thanks and greetings
  
  Jega

  Thank you

  What happens if you do this and rerun the select

  SQL>alter table test_table modify test_column varchar2 (8 byte);
  

  Edit:
  You may need to open a SR with Oracle on this one
  (Really, financial system on XE?)

  Concerning
  Peter

  Published by: Peter on March 4, 2009 12:58 AM

• Menu Acrobat disappears when you use QApplication even with qt_mac_set_native_menubar (false)

  I work a plugin Acrobat (acrobat 8 software development kit) which uses the Qt Widgets. It works very well with Qt 4.3.4.

  After the upgrade of Qt 4.6.4 carbon it is possible to see the Acrobat menu if QApplication is instantiated.

  int argc = 0;

  (void) new QApplication (argc, 0, true);

  qt_mac_set_native_menubar()wrong);

  With these 3 lines, the menu acrobat does not load, it can be none other that quitting with a force quit.

  There is no warning message, everything seems works fine, except that it's really does not work.
  

  Without these 3 lines, acrobat works well as long as no widgets are created (see QApplication doc).

  Why?

  Thanks for the information you have
  

  The solution was to use qApp->setAttribute(Qt::AA_MacPluginApplication,true); insead of

  qt_mac_set_native_menubar (false);

• Where are the models of 'New project' when you use Visual Studio with labwindows/cvi 2013 2012?

  Background:

  Platform: windows 7 X 64

  Visual Studio 2012

  LabWindows/cvi 2013

  First install Visual Studio 2012.  Then follow this installation Labwindows 2013.  In the installation options, I check 'visual studio 2010' (there is no option for VS2012).

  Question: After the installation of Labwindows, I expect to see patterns added to the "New project" dialog box in Visual Studio.   For several years I used labwindows.  Changed the method for using Labwindows with visual studio?

  Thanks in advance for any help.

  Hello jsut64,

  Unfortunately, there is no option to integrate with Visual Studio 2012 yet LabWindows/CVI. We plan to add in a future release.

  Best regards

  = Nelu F. | National Instruments.