Where are the models of 'New project' when you use Visual Studio with labwindows/cvi 2013 2012?

Similar Questions

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• Where are the saved files that someone sends you through Skype Windows8

  Hello

  I just bought a new computer that has windows 8 installed above and I must say that I was shocked when I realized that the system is like that running a pad that is so bad, if you want to actually work with the computer.

  Then, I installed Skype and was amazed that there is nothing that you can do with it. No video call?

  I use Skype to send files and make video calls. Now, when someone sends me a file I have no choice where this file is saved... Where are the files stored?

  OS: Windows 8

  Thank you

  type in your windows search bar
  
  '%AppData% '.
  then you will go to the folder "Skype".
  and there will be a folder with "my received files."
  had the same problem and figured it out

• How to remove all the old e-mail addresses when you use change as new?

  When you use as new edit on a mail, previous winners are listed in the address field. How to delete these addresses all at once rather than having to delete them one at a time?

  I don't know of anyway to remove them all at once, but there is remove an add-on that places a button next to each address, which is easier to use that repeatedly do select + and + DELETE. You just keep clicking the small X in the address above.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/address-close-button/?src=API

• Impossible to activate the services on VMKernel adapter when you use a custom TCP/IP stack

  Hello

  Very strange error.

  Unable to activate services on VMKernel adapter when you use a custom TCP/IP stack.

  Added custom stack by using this command: esxcli network ip netstack add n = "10 GB"

  Using the GUI to add the adapter to a normal vswitch.   By choosing the new battery, all services are grayed out.  (at time of pick their all first on the stack on the other, then change to the new battery, it shows in preview before pressing the finish)

  running on vcenter build camera 5.5 1440531

  ESX 5.5.0 1439689 (VSAN release)

  No idea what could be the problem?

  Stack additional TCP/IP is not fully functional to 5.5 for vmkernal services.

  Note this:

  Documentation Centre of vSphere 5.5

  You can activate services for the default on the host computer TCP/IP stack.

• Unlocked blackBerry Smartphones Software Update has not received the AT & T brand PRIVATE when you use a non - AT & T SIM card

  Dear whom it may concern,

  I saw one of the support forum of Blackberry Web site on "software update, not received the AT & T unlocked brand PRIVATE when you use a non - AT & T SIM card". How can I receive the OTA update in the notification bar?

  Now, my OS is Mashmallow 6.01 build No.. AAF355 (June 1, 2016) or do I have to update (auto loadder) my Priv to AAG873 in order to get the direct OTA from Blackberry in the future.

  Thank you

  Good questions. I can speculate only at this stage. I guess that since it is updated by BB, they use a revision update for all devices to facilitate management. AT & T updates their different, since they have different methods of approval (Note T-mobile even updated as unlocked devices). Unless you want to get specific version of AT & T that could fix something that the other version does not work, I'd wait for the OTA. I did three refills of OS because I couldn't OTA of AT & T, and they take a lot of time. Take the time then to restore and to reconfigure all the settings you had before. Not funny.

  To be more precise questions. Depends on you, but for me, would be updated via OTA only now that it's available. Yes, if you want auto charger, use AT & t. even as before, wait for OTA, unless you have a specific automotive need load the operating system.

• Where are the models for the personalized stamps?

  I tried to follow the directions here: https://acrobatusers.com/tutorials/creating-a-custom-dynamic-stamp-infographic, but to step #2 when I opened the browser, no choice of models was available.  Where should I use to find?

  Hi Linda Kiss,

  As noted in step #2, when you click on create custom stamp, you will get a box. You must click on Browse...

  

  Then you get a window where you can search for and select the image file you want to use as a stamp.

  Make sure you change the type of file extension to one in which the file is saved on the system as it is default defined as "Acrobat PDF files (.pdf). If it is saved as a PDF so no need to change.

  

  Once you select the file. Click Open.

  Let us know if you have still any question or you refer to something else.

  Kind regards

  Meenakshi

• Firefox won't save passwords, will not be asked to save them. I have used this for 2 years +. I know where are the settings. New comp, Windows 7, Ffx 4. You are prompted to save the password 5 times and stopped so I ask everyone here if they have any sugg

  Why must you do this such a pain. 40 minutes, I tried to post this question.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • http://KB.mozillazine.org/Password_Manager
  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• Label of the ASM to name of LUN mapping; Are not even necessary device names when you use ASMLib?

  = Environment details start =.

  OS: Oracle Linux 6.4

  Version Infra grid: 11.2.0.4

  Storage: EMC VMAX

  ASM Lib version:

  # rpm - qa | grep oracleasm

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  oracleasm version came not in rpm-qa output may be because it is part of the Oracle Linux kernel. But the 2 components above are not

  = Environment details end =.

  We have a 2 node RAC cluster.

  We wanted to add 2 LUNS to our data Diskgroup and asked team storage available to both nodes of the cluster.

  After that they provided, the Linux Admin scanned the LUN and powerpath device names were generated. The powerpath device names like SCSI logic unit number names are incremented sequentially. Because, two additional powerpath LUN used to Node1 to a local file system, the names of powerpath were incrementing differently in the two nodes.

  Thus, for the same LUNS emcpowerpath names differed in Node2. Linux Admin did not notice this difference. And he told us the names of newly added from Node1 LUNS powerpath that have been

  / dev/emcpowerv

  / dev/emcpowerw

  But in Node2, the same LUN were appointed

  / dev/emcpowert

  / dev/emcpoweru

  The DBA guess powerpath name these 2 LUNS will be same on Node2, label the discs to help

  oracleasm createdisk DATA17/dev/emcpowerv1

  oracleasm createdisk DATA18/dev/emcpowerw1

  After marking in node 1, the DBA ran scandisks in Node2. But while the oracleasm scandisks in Node2 is running, it does not seem to/dev/emcpowerv and/dev/emcpowerw in Node2. Instead, ASMLib is smart enough to read the LUN ID in Node1 and search devices powerpath with the same LUN ID and labels as Node1. What's it like in Node2, / dev/emcpowert is labeled DATA17 and/dev/emcpoweru is labeled DATA18 correctly, as shown below.

  Node1

  Node2

  LUN ID

  Label of the ASM

  / dev/emcpowerv

  / dev/emcpowert

  873F

  DATA17

  / dev/emcpowerw

  / dev/emcpoweru

  629:

  DATA18

  Confirmed using the oracleasm querydisk Pei/dev/emcpower < x > .

  During labelling using the oracleasm createdisk , since we use the LUN name I always thought that asmlib dealt only with the names of devices (Powerpath name in this case). I didn't know that ASMLib treats ID LUN. If ASMLIB faces in LUN ID internally, then you don't need to have the same name for a particular LUN for disks shared in different RAC nodes? Right?

  ASMLIB contains 3 packs. Oracleasmlib, which is distributed under a license of Oracle user space and is not part of the standard GPL software distribution. Oracleasm-support, which is in the standard repository and kernel driver of Oracleasm, which is included in the core Oracle UEK only or distributed by Red Hat to RHCK kernel. The subsequent RHCK driver requires a Red Hat subscription. You need all 3 installed packages.

  ASMLib doesn't care to the SCSI ID or device names. When you configure a device to ASMLIB, he writes a header special disk in the device, the command scandisk read and identify a device. ASMLIB devices are populated under the tree of device/dev/oracleasm and found by ASM using the default ORCL: device chain.

  Don't forget that ASMLIB does not work with multiple devices and if you use DB-Multipath or EMC Powerpath, you need to blacklist the physical devices so ASMLIB will use powerpath or multipath device instead. Otherwise there will be no failover devices like ASMLIB will simply use the first device found and ignore the other. Check the following:

  http://www.Oracle.com/technetwork/topics/Linux/multipath-097959.html

• New page is not opening in a new window when you use a dynamic menu

  I read a previous post about this, but I don't really see a solution that I could implement. I have a dynamic menu, and I want an article on it to open a new image. Here is the code to the module of the model.

  {module_menu, version = '2', '901683' = Flash, moduleTemplateGroup = "Default"}

  It's the menu main template of the Tribeca site template.

  I tried to insert (_blank) under appropriate destination, and again, it opens in the same window.  I got together at the previous post that it was a matter of version, but as you can see, the code says "version 2"... or I misread that?

  I could not find the place where to make changes. The previous post suggested I'm looking for the CSS on the style of home, but I'm not using a house model.

  Any thoughts?

  Chuck

  You don't put _blank in the module, and that's not all the. Module. There is a folder named models module and which is used by default menu layout. You must ensure or create the target for the link element attribute and add the tags.

  You then add your _blank in the area of the tag for target in admin.

• Where is file stored on your computer when you use: File.applicationStorageDirectory

  When you are using File.applicationStorageDirectory , where Adobe stores the program on a Windows/Apple computer? I know what this means, but I would just be able to see for myself that the file is created when I develop my application.

  Hide which was a change in Mountain Lion I think. You can get there by choosing to go to the folder in the Finder (in the menu go) and enter the following:

  / Users/irobot/library /.

• Application of the terms of registration parent when you use START WITH / CONNECT BY FRONT

  Hello
  
  I'm trying to understand how to apply when only apparent conditions when using records to begin with... connect by prior logic.
  
  Here is an example...
  
  Table:

  CREATE TABLE TEMP_BTL
  (
    TRANS_ID               NUMBER(22,20),
    PARENT_TRANS_ID  NUMBER(22,20),
    TYPE_ID                 NUMBER,
    STATUS_ID             NUMBER
  );

  Records:

  SET DEFINE OFF;
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (1, NULL, 1, 2);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (2, 1, 2, 1);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (3, 2, 3, 4);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (4, 3, 4, 3);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (5, NULL, 2, 3);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (6, 5, 4, 1);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (7, 6, 5, 3);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (8, 7, 6, 2);
  Insert into TEMP_BTL
     (TRANS_ID, PARENT_TRANS_ID, TYPE_ID, STATUS_ID)
   Values
     (9, NULL, 1, 3);

  If my query rules are:
  
  PARENT_TRANS_ID IS NULL = parent_record
  
  I have to limit my results so that only considered hierarchical groups are groups that record the type_id of the parent = 1 (single parent record limit to this condition, no children)
  
  Then I need to find the max (trans_id) of each subset for groups where the parent record type_id = 1
  
  Thus, according to the data from the example above, would be results that I would look:
  
  TRANS_ID = 1 group parent, I don't want to return trans_id = 4
  
  I would not return anything for the trans_id = 5 parent group because the type_id of that parent is not 1
  
  For trans_id 9, is the parent and the only record for this group so it is type_id = 1 I'm not going back 9 as the max (trans_id) for this game.
  
  And then, eventually, I'll limit my results to the place where the max id batch trans = 3.
  
  Any help is appreciated...
  
  Thank you
  Christine

  Hi, Christine.

  cad0227 wrote:
  Hello

  I'm trying to understand how to apply when only apparent conditions when using records to begin with... connect by prior logic.

  In your example of data 2 is the parent of 3, and 3 is the parent of 4.
  Use 'root' to describe nodes (for example, 1 and 5) that have no parents.

  Here is an example...

  Table:

  CREATE TABLE TEMP_BTL ...
  

  Thank you for including CREATE TABLE and INSERT statements. It's very useful!

  If my query rules are:

  PARENT_TRANS_ID IS NULL = parent_record

  I have to limit my results so that only considered hierarchical groups are groups that record the type_id of the parent = 1 (single parent record limit to this condition, no children)

  The START WITH clause is where to put the conditions that apply only to the roots.

  Then I need to find the max (trans_id) of each subset for groups where the parent record type_id = 1

  Thus, according to the data from the example above, would be results that I would look:

  TRANS_ID = 1 group parent, I don't want to return trans_id = 4

  I would not return anything for the trans_id = 5 parent group because the type_id of that parent is not 1

  For trans_id 9, is the parent and the only record for this group so it is type_id = 1 I'm not going back 9 as the max (trans_id) for this game.

  And then, eventually, I'll limit my results to the place where the max id batch trans = 3.

  Any help is appreciated...

  It would be useful that you reported the exact output desired. Describing the output is great, especially when it is as clear as your description, but describe the results, in addition to, not instead not to display.
  Here are the results you want?

  `  ROOT_ID MAX_TRANS_ID
  ---------- ------------
           1            4
           9            9
  

  Here's a way to get them:

  WITH     got_root_id     AS
  (
       SELECT     trans_id
       ,     CONNECT_BY_ROOT trans_id          AS root_id
       FROM     temp_btl
       WHERE     status_id     = 3
       START WITH     type_id          = 1
                   AND     parent_trans_id     IS NULL
       CONNECT BY     parent_trans_id     = PRIOR trans_id
  )
  SELECT       root_id
  ,       MAX (trans_id)     AS max_trans_id
  FROM       got_root_id
  GROUP BY  root_id
  ;
  

  Published by: Frank Kulash on 13 August 2012 13:58

• Problem creating a new line when you use tabs regions

  I'm new on JHeadstart and ADF and use the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its effectiveness for a new application of significant size. As part of this evaluation, I created a small application (you can do this with the HR schema using say the Departments table) with a single entity and VO. I then placed some fields in several regions of element within a region by tabs on the same page and below the Group (Table, Table Overflow Style available below with separator style) on JHeadstart. Display the existing lines very well and I can view the data on separate tabs.
  
  However, if I try to create a line, I can fill in the data on the main area, but if I fill in the data on the first region of tabs I can not switch to the next without a mistake tab is generated.
  for example using departments - fill DepartmentId and DepartmentName on main region, learn ManagerId on first region by tabs and try to move to the second area by tabs to fill LocationId:
  Missing mandatory attributes for a line with key null of type HRModule.DepartmentsView1
  DepartmentId in HRModule.DepartmentsView1 attribute is required.
  DepartmentName in HRModule.DepartmentsView1 attribute is required.
  If you save, and then you can navigate.
  
  You can also prove something similar (but probably the same cause different error message) on the myJHSTutorial demo. If you go to an employee outside the regions page and try and create a new employee (using the button "+" under the label of 'Employees'), then the legs are not updated, and any attempt to change the tabs causes an error
  
  Could not validate a line with key oracle.jbo.Key [999] in HRModule.EmployeesView3
  Required attribute HRModule.EmployeesView3 wages.
  Wages must be between 6000 and 12000 for this work.
  
  The JHS Devguide does not help. Any thoughts? I can send the HR sample if you wish.

  David,

  That is right.
  The change in model will be added to the next version of JHeadstart so you don't have to make this change.

  Steven Davelaar,
  Jheadstart team.

• How can I fix the cannot find server error when you use Bing?

  When I want to use Bing as a search engine, I always get an error message cannot find server. When the connection problem is diagnosed, the result is that there is not a problem with the connection. I get the same thing when I use the Google search engine. OT most of the time I'm successful search with Ask. I use Windows XP.

  Hi MineMN,

  ·         Did you do changes on the computer before the show?

  ·         What web browser do you use?

  If you are using Internet Explorer, follow these methods.

  Method 1: Follow the steps in the article.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Method 2: If you still face the same problem reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  Method 3: Reset the proxy server. Follow these steps:

  (a) click Start, run, type cmd , and then press enter.

  (b) type the following commands at the command prompt and press enter after each command:

  proxycfg d

  proxycfg-u