L50-A-10 q satellite: Win8.1 Pro Wi - Fi status LED does not

Similar Questions

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Satellite A110 - after Vista upgrade media control button does not

  Hello, could someone help me?

  I upgraded my laptop Satellite A110 to Vista. Media button control does not work after upgrade to vista.

  Help, please...

  Hi guys

  You consider right. You must install the Vista Toshiba value added package.

  I found this TSB Toshiba

  TOSHIBA value added V1.0.25 for VISTA contains 3 different version. What is right for my cell phone? http://support.toshiba-tro.de/KB0/TSB7801XK0005R01.htm

  You must check your key for laptop specifications and then use the right file and drivers.

  Maybe this could be some help how to determine the amount of buttons on the right:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26254

  Best regards

• I paid for the Pro account paid feature still does not work

  I paid for the Pro account paid feature still does not work

  Hi davidv92782444,

  Make sure that you open the PDF in Acrobat Pro MS download and install Adobe Acrobat DC to use the Acrobat features not in Acrobat Reader ms, both are different applications.

  Kind regards
  Nicos

• Premiere Pro 5.5 Master Collection does not webM and OGG video files. Even the fnord plugin does not work. What can I do?

  Premiere Pro 5.5 Master Collection does not webM and OGG video files. Even the fnord plugin does not work. What can I do? Furthermore, this is called customer service?

  The simple solution. The file WebM.prm must be left the 6 CS for CS 5.5 folder.

• First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?

  First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?

  Hi Carl U.

  You have solved this problem yet? If not, please contact support here.

  Thank you
  Kevin

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite Pro R50 - brightness control F3 does not work

  Hello

  I have a R50 Pro Satellite - bought just 1 month ago.

  Suddenly the order of function F3 to control light intensity has stopped working.

  The brightness can down with F2 function but F3 does not work

  F3 in the software and the operating system back to research, but do not work by pulling the brightness setting.

  So I'm stuck with my brightness down as low as it goes.

  I downloaded the latest driver for the feature key and installed, so it isn't that.

  Anyone got any help they can give?

  See you soon
  Craig

  As a temporary solution, you can change the brightness in the power settings.
  I really don't understand what the problem may be, but try to reinstall the utility system then Toshiba and Toshiba driver to feature key.

• Satellite Pro C50-A-153 - Touchpad does not work properly

  First, sorry for my bad English.

  I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

  Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

  It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

  Can someone help me with this?

  Thank you.

  On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

  How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  Check it out.

• Satellite Pro A30: CD/DVD drive does not-how to restore the OS?

  I want to run the recovery discs to restore my laptop to its original state, but the cd/dvd-rom does not work.

  Does anyone have an idea how I can do this is by plugging my laptop on another pc or is there a program on the web, I get to do this for me.

  Bacically, even after that run CCleaner and other programs of the laptop is still slow and struggled.

  Hi mate

  I'm not very well if the former satellite Pro A30 is able to boot from USB drive Mr. in this case, you can try to install the OS from USB flash stick.

  Here's an interesting ad on this theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63986

• Satellite Pro P300 - output HDMI port does not

  Hi all

  Well it starts to drive me to distraction and Im hoping that theres someone who can put me out of my missery lol.

  I tried to connect my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable that I use for my PS3 but the connector does not simply. I keep finding all these messages in various forums saying how they can't get the HDMI connection... that would be great, at least, this means that they were connected.

  Are there different links for the HDMI? The one I have is diagonal connector but the port on the laptop is more square and just doesn't fit. So, if it is not a connector, does that mean I have a funky port on the laptop.

  There is also the issue of connecting my laptop to my amp which controls the surround sound system. Which link is best to use, as there is no real connections audio output?

  See you soon

  Hello

  Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
  Maybe you can also post a picture of the HDMI port. Normally there is no different HDMI port, all have the same physical size.
  I m PS3 not owner, but maybe he has a special connector. Have you tried another cable?

  Regarding the audio connection I use the normal line of output port to my external speakers. Have you tested this?

• Re: Satellite Pro A60 - PCMCIA WLAN card does not question CardBus

  I received an A60 to upgrade for a friend and one of the necessary things is a wireless card.

  I got a 32-bit cardbus card but when I insert into the laptop, nothing happens. XP does not recognize, the oo lights do not come on the map.
  First I thought it was a faulty card but I tried other cards and get the same results and I reinstalled XP and all the drivers but nothing.

  I've seen other messages on the change of the mode in the BIOS, but there is no mention of the CardBus in the BIOS.
  The laptop uses the BIOS version 1.9. I just want to check is there something escapes me or the CardBus location just does not work?

  Hello

  Satellite Pro A60 was equipped with the 32-bit and 16-bit PCMCIA slot that supports PCMCIA card * Type-II * only!

  Have you used the * PCMCIA Type-II card?

  Perhaps you have used is not compatible PCMCIA card, you should check this first!

• Satellite Pro U200: My safe file does not open

  Hello
  Running XP Pro on a computer Satellite Pro U200, I have installed Norton Ghost 10 (after a lot of difficulties that I had to uninstall Norton anti-siphoning I've ever used on the machine).

  Subsequently the 'My Safe' folder does not open. Normally when double clicking it asks a fingerprint or a backup password but now it shows just an hourglass for a millisecond and then's there!

  Can anyone tell what he might have to get this service running the settings?
  Best regards, Robert

  Hey Buddy,

  may I ask what 'secure record' this is? This file has been accidentally created by Norton Protection System?
  So you have this fingerprint software which manages your fingerprint and your access in the system, etc., etc... ; have you checked if something in this software changed?
  A trial might reconfigure these programs.

  Welcome them