L750 WiFi blank SuperHub satellite question

Similar Questions

• Satellite L750 - WiFi lost only 5 minutes

  L750 WiFi satellite lost after 5 minutes. Updated bios, drivers Atheros and configfree...

  WIFI connection disappears permanently, or your laptop connects again?
  Have you verified the WLAN functionality with another router?

• Question on WiFi with a Satellite Pro 4200

  Someone at - he already connect a wifi on a Satellite Pro (W98) card? Please let me know the type of PCMCIA, etc... You can also the wired connection to the local network.

  Thank you

  Hello

  As far as I know, you can use any PCMCIA WiFi card types on your device.
  Sometimes, you have to install drivers or utilities from PCMICIA Wireless card manufacturers. Please check out some Web sites in Google. You can find many attractive offers for WiFi cards.

  Best regards

• Blank Superhub & TC Bridge Mode

  Hi all

  I am based in the United Kingdom and e through our internet a blank Superhub (handset cable modem / router) I want to connect my TC and use the network wireless of my TC, but maintain the Superhub wireless as well.

  I implemented the TC mode bridge on the network tab. I was then the port connection WAN on the TC to the Superhub, but it kept crashing the superhub. So, I went and connected to one of the LAN of TC ports to the port ethernet on the Superhub.

  It connects okay and I can get on the network without wire of TC, but it will not allow internet access. When I unplug the TC, I have to reset the router.

  Any help appreciated. All of this used to work very well, and then the Superhub has physically changed by Virgin for a update.

  I have not changed anything in the Internet tab in the AIrport utility, do I have to?

  Other objects related to the Superhub are a Bridge Sonos and Apple TV (both wired).

  Thank you

  The TC is defined to create a wireless network... SHOULD NOT EXTEND wireless.

  Although I doubt that it would be even possible to put in place this way.

  The internet tab must be configured for DHCP... but let me suggest another installation program that I find my best.

  Static IP address.

  I did a very complete post here with details.

  Re: time capsule Airport Guard disconnection

  If you need assistance please give me real info of the Virgin router... its IP address and the DNS and gateway, you found on the client machines.

  From this, I can give you together more specific instructions.

• Help setting up a laboratory at home using Cisco kit and a blank Superhub

  

  Hello world

  I just started my CCENT class and so I try to create a laboratory that is separate from my LAN House, initially using a blank Superhub and a Cisco 1841 router.  Please keep in mind that I am a beginner, so it may not make sense or be completely illogical...

  The superhub for those who don't know, is a renamed netgear, limit VMDG480.  It's basically a cable modem and router wireless combined.

  The normal daily LAN side of the network was the default installation to receive an IP address via DHCP from the superhub in range 192.168.0.1/24.

  At first, I thought I could put things in preparation for my lab installation, by configuring the LAN subnet using 192.168.0.0 and superhub of/16 mask rank for my 'everyday' network and 192.168.1.0 rank for my "laboratory at home." (Good or bad?...)

  Unfortunately, I'm unable to do so because the superhub only allows the last byte in the mask to be changed, so I changed the mask and it now reads 255.255.255.128, with the idea that I can always have 2 separate networks.

  In the photo above you can see devices on the right side are all directly related to the superhub and continue to work as usual.

  On the left side is where I've implemented a Cisco 1841 router and a laptop computer to test.

  The details of each device are;

  Blank Superhub
  LAN:192.168.0.1
  The DHCP scope: 192.168.0.2 - 192.168.0.126

  Cisco 1841
  Fast Ethernet 0/1: 192.168.0.126
  255.255.255.128

  Fast Ethernet 0/0: 192.168.0.129
  255.255.255.128

  PC2 (mobile wired connected to FE 0/0)
  IP: 192.168.0.200
  255.255.255.128
  Default gateway: 192.168.0.126 (the address IP of Cisco 1841)

  Someone would be kind enough to look at this and tell me where I'm wrong please?

  I thought about pulling the superhub completely, but I am bound to her by my ISP :(

  Hello

  It of a little early in your studies for this :) but implementation of your knees it should work:

  1841 router:

  int fa0/0 (interface connected to the hub)
  IP 192.168.0.126 255.255.255.0
  NAT outside IP
  No tap

  int fa0/1.2
  encapsulaton dot1q 2
  IP 172.16.0.1 255.255.0.0
  IP nat inside
  No tap

  int fa0/1 (interface connected to)
  No tap

  NAT configuration:

  access-list 1 permit 172.16.0.0 0.0.255.255
  IP nat inside source list 1 interface fa0/0 overload

  Add a default route:
  IP route 0.0.0.0 0.0.0.0 192.168.0.1 (so your router knows where to forward DNS queries to 8.8.8.8)

  Connect your 3560 to the second port on the router and configure a trunk on the switch port and add vlan 2:

  int fa0/0 (connected to the 1841 router)
  switch to trunk encapsulation dot1q
  mode trunk switch

  VLAN 2
  name Home_Lab

  Connect your PC to the second switchport and add vlan2:

  int fa0/1
  access mode switch
  access switch vlan 2
  No tap

  Finally, give your PC an address in the subnet of vlan 2:

  IP: 172.16.0.2
  Mask: 255.255.0.0
  Gateway: 172.16.0.1
  DNS: 8.8.8.8

  You should be able to ping the address of the router on the subnet in 172.16.x.x 192.x.x.x. I don't have a Virgin hub to test this, but it worked well with two 1841 routers.

• IntelPro2200BG (miniPCI WiFi module) and Satellite 2450-201 - question

  I want to buy a miniPCI WiFi module to my Satellite 2450-201.
  My laptop has a type III miniPCI port and a WiFi antenna version.
  Upgrading WiFi cheapest I found is IntelPro2200BG (IEEE 802. 11 b / g).
  This card will work with my laptop?

  See you soon,.
  Tomek

  Hi Tomek!

  The Intel card, I have no information, but why don't you look at the Toshiba products?

  Take a look at http://eu.computers.toshiba-europe.com
  You will find the "product catalog" and click on "Options and accessories.

  Search for 'Communications' and Mini PCI cards.

  You will find in many card Wifi from Toshiba.

  Take a look!

  Good bye

• Question about upgrade WiFi + Bluetooth on Satellite P20

  Hello community,
  I want to improve the used Satellite, I had recently. Unfortunately, I can't find a few options I want on the Toshiba site.

  Which modules WiFi and Bluetooth do I need for the Satellite P20 and where I could buy those in Germany?

  TIA
  Christopher

  Hello Christopher

  At first, I have to say that the Satellite P20 is portable very nice. I got it 3 years ago. I had Satellite P20 304 and I've updated the WLAN and drive optical drive with DVD-RAM.

  WIFI compatible cards for Notebooks this model are:
  PA3212U-4MPC (Agere 802. 11b) and
  PA3273U-2MPC (Atheros 802.11ab).

  According to the specification upgrade BT is not possible. Anyway can you please post exact description of model P20 (P20 - xxx).

  Bye and good luck!

• Low WLan/WiFi signal using satellite L50

  I bought Toshiba Satellite L50.

  I really bard WIFI reception - good now I sat 2 meters between the router and I have only 2-3 bars.
  If I am to 7 meters away, I have no reception at all.

  There is no problem with the router, I checked with other devices (phones, laptops).

  When I'm with a direct access to the internet with internet LAN cable is always at maximum speed.

  I made sure that I have the most up-to-date drivers for my network card.

  How can I solve this?

  I have the same problem with my new ray. The network is not received even though I'm 3 meters away from my router!
  Have you found a solution?

  Posted by someone110
  

  I bought Toshiba Satellite L50.

  I really bard WIFI reception - good now I sat 2 meters between the router and I have only 2-3 bars.
  If I am to 7 meters away, I have no reception at all.

  There is no problem with the router, I checked with other devices (phones, laptops).

  When I'm with a direct access to the internet with internet LAN cable is always at maximum speed.

  I made sure that I have the most up-to-date drivers for my network card.

  How can I solve this?

• Can not turn on WiFi on my Satellite C660-2RP

  Hello

  I can't seem to activate / disable the wireless network.
  FN + F8 key does not work, but other combinations FN + Fx works well.

  Flash cards for UTILITIES-TOSHIBA-START restart does not work and flash cards are not displayed.
  The drivers are up to date.

  In: control panel-device driver network card
  my card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC-> enabled.

  My PC: Toshiba Satellite C660-2RP (PSC0QE)

  15 days ago ca officials!

  I restore at a later date, but nothing comes back.

  Could you help me find the button enabling / DISABLING WIFI because I do not see a solution
  Thank you.

  Message was edited: assignment has been translated

  I don't know if this will help but try to reinstall that Toshiba value added package (PVAT). Remove the preinstalled and after restarting the laptop version installed last versin that you find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Mini WiFi PCI on Satellite L10-202

  Well, that's the problem - the computer is compatible wi - fi laptop? i.e. that my laptop has no antenna internal for the wireless card? because I don't see one when I remove my cover mini pci. When I installed the wireless 2200BG card intel (pro) it it has detected and installed but its signal was very weak. at the point where the distance between the access point pushes the connection is lost. my laptop has even an external button to activate wifi card that works for this card intel.
  The issue is always made my satellite L10 202 has a antenna internal wireless card mini pci
  the model number is PSL10E - 01P00DG3

  Hello

  Miro is quite right.
  I have goggled and found the same info as wireless LAN / Wi - Fi is certainly not available on this device. :(

  Best regards

• WiFi for my Satellite card

  Yesterday I have buyed a WiFi card for my computer Satellite. I use it to connect AP to my brother. It does not work. My computer is kaputt? Can someone help me? Transfer to thank.
  Wonne.

  Hello, what laptop do you have? This card you buyed, how is it connected to your laptop? As the PCMCIA card (the slot on the side of the laptop or was this card installed inside of your Machine?)

• Need drivers Sound & WiFi for my Satellite M70 151

  Please, can someone help me?

  Recently I bought on eBay a Satellite M70 - 151 of the Germany (I live in Malta). It arrived yesterday, less than any CD everything was in German. I reformatted and installed XP in English. Stupidly, I forgot about the drivers, and now I have no sound and lost WiFi.

  I searched in vain on the net for the drivers of these, the problem is that I don't know what sound card is in the notebook.

  A nice person can help me?

  Don t worry dude all Toshiba drivers can be downloaded from this Web site;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There you have to choose from;
  Laptop Satellite - Satellite M Series Satellite M70 PSM71 Win XP

  Enjoy ;)

• How can I activate the WiFi mini-PCI satellite 1905-S301 card?

  Greetz! I have installed a network card wireless mini-PCI in option in my Toshiba Satellite 1905-s301 specifications and turned on the power switch. MS Windows XP Home SP2 Pro edition recognized hardware and install its drivers - there is no cross or question mark next to the Atheros AR5001X + Wireless Network Adapter in Device Manager. However the connection of wireless network manager tells me that there is no current wireless network card. When pressing Fn + F8 a window appears saying that there is no build-in wireless LAN.

  What should I do to activate my mini-PCI Wireless LAN card? If possible, send your suggestions to my email, please!

  Hello

  You must activate the WLan switch on the side of the laptop!
  Additional select the WLAN card properties and check under the Advanced tab.
  There should be an option called turn on/off the Radio. You will need to fix on.

  Greetings

• Very weak WIFI signal on Satellite Pro L10

  Hello

  I have a Sat Pro L10 delivered without a mini pci wireless card so I bought and installed an and is equipped with an internal antenna behind the screen. When I'm in the same room as the router I have a brilliant connection but as soon as I leave the room I lose all together. The router is fine as the other people have no problem connecting to this. The card I bought made by Agere but is marked as Toshiba, I updated the driver to the most recent I could find which is June 2002.

  Any help on this would be greatly appreciated as I'm tired of dragging this wire around with me.

  Hello

  I think that there is not much to do. I think that the environment has a strong influence on the Wlan signal reception. It of the same question as yours.
  My brother uses the WiFi network at home and the signal is strong enough if it is in the same room but in other parts, the signal is very weak. But at home it can receive WiFi signals without any problem. The signal is strong, also if it is in different rooms

  I think that the walls of the room are the reason for the weakness of the signal.

  But you can see the Wlan card properties in Device Manager. There you can change some settings in the Advanced tab. For example, to disable energy saving, etc.

• Very unstable WIFI connection on Satellite A200 PSAE4E

  Just had my Equium A100 replaced with a satellite pro A200 and for some reason that I am fighting to get it connected to my wireless network. I had the old laptop connected properly and used channel 11 on my WAP.

  Now, after trying to connect my new laptop I find the connection very unstable. I tried different channel numbers, and these worked mainly the lower numbers, but are proved to be slow and unreliable. I have other laptops that are very well using my WAP to channel 11.

  Anyone who has experienced this trouble and what is the solution.

  WAP Netgear wg602. No firmware update available

  See #.

  Macca

  Hello

  Just a question: do you use pre-installed Vista or maybe WXP on your new laptop computer?