Label error after adding/removing items to a property node

Similar Questions

• TPG errors after adding a new disk

  Hi, I have a strange problem that affect my

  MBP mid 2012

  -ssd 250 GB optibay + 500 original drive

  -8 gb HyperX

  .. I had a few problems with the installation of Windows 10 (with 7 and old MBP was easy even without Bootcamp), so

  I decided to do

  -a clean install of El Capitan on the ssd (not mounted original toshiba drive)

  -a clean install of windows 10 (player always on my desk)

  all perfect, everything works, but when I put my disc in its own place, 10 Windows won't start and say the classic

  "No boot device - insert boot disk and press any key".

  If I remove any return... and windows boot.

  so I try everything regarding routine maintenance (clear nvram, search for errors in the disk utility and so on)

  When I remember the nightmares of the TPG errors (with old MBP, I got a tri-boot with linux, osx and win)

  and the suspect is the partition number (?): I remember something like '4 max in mixed mode GPT/MBR partition' or something similar

  diskutil list (without the toshiba drive)

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 250,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB Cannonball 185.2 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 64.0 GB disk0s4 data base

  sudo TPG - v - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk0 ': Undefined error: 0

  Is there something I can do?

  Please don't tell me to reinstall windows... was a pain in the *.

  1. you have a corrupt GPT. Please download Fdisk TPG http://sourceforge.net/projects/gptfdisk/ .

  2 Please after the release of the

  sudo fdisk/dev/disk0

  3. is it possible to leave Windows player in the main Bay and put the other Optibay drive?

• an error after the removal of two partitions and try to create a new. !!!!!!

  during the installation of windows 7 32 bit and trying to create a new partition... one took place error: cannot create a new partition on the selected unused space. [Error: 0x8004240f].

  Rather than create the partition during Setup, try to install Windows 7 on the drive, and then create the partition once installation is complete.

  How to create a simple partition in Windows 7 (tip

• Firefox 9.0.1, Application JavaScript error on adding menu item? Dictionary and directory of fonts.

  Firefox can operate normally and load pages normally, but does this affect it on anything with Firefox?

  They have developed whenever I load Firefox, and clicking on the 'OK' button on each of them, Firefox will load.

  I have screencaps of it, http://imgur.com/a/nZUn5#2

  Other information:
  Add - ons, I was running are Ad Block Plus 2.0.3 Ad Block Plus pop up edition 0.3, 0.9.10 download status bar, element hiding Helper for Ad Block Plus shortcuts 1.2.1 Google 2.1.8.1, JavaQuick Starter 1.0, Microsoft .NET Framework Assistant 0.0.0 Print Edit 7.1 QuickDrag 2.1.3.21, QuickFox Notes 2.7.1 ReminderFox 1.9.9.5, TableTools2 1.15, pilot test 1.2 and 20111107 WOT.
  In addition, icons QuickFox Notes disappeared when I loaded Firefox when the problem occurred.

  If this problem has already been addressed in some way, please link to the article/post/page, on which it can be found.
  Thank you for your time.

  You can try to reset the preferences via the starting window of the Save mode.

  • Help > restart with disabled modules
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/resetting+preferences

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Activate the copy of windows for Windows not genuine error after Virus removal

  Hello

  About 2 weeks back, I had to contact my business anti-virus software to help me with a problem of PC viruses presumed and it turns, 3 files on my pc were infected - 1 being a registry key. As part of their process of cleaning, they have deleted all 3 files (I don't know what registry key has been infected) but since then my machine acted strange... first of all, my laptop had an activated version of Windows 7 professional since late March / early April of 2012, but given that these 3 files were deleted , it gives me the message "this computer is not running genuine windows. Also I am not able to open the windows sound mixer.
  A deletion of registry keys could cause this scenario? Is there a way to fix things to make my PC work as before WITHOUT a format/reinstall everything? Note When I open the properties of the system, windows confirms the OS has been activated.
  Thank you

  You're welcome-good luck.

• How can I fix a code 43 error after you remove inadvertently an external had drive from a pc without proper ejection procedures? I'm far away from the pc, where it has been deleted and cannot go back.

  The external hard drive is a Verbatim 53001

  Maybe nothing to do with incorrect ejection.

  Other usb devices work on this PC?

  In Device Manager there are all the yellow warnings?

  If so, select the problem device, uninstall, reboot and see if that helps. (Outside must be disconnected during this process)

• Intermittent error 1077 on update of the Boolean property node

  I have an intermittent error disabled 1077 on changing the value of a series of nodes of Boolean property in my program. I'm passing an array of references in a loop For, all the controls are in this VI and it can be classified for these purposes as a first level VI.

  Most of the time that my code works fine, however, debugging my code this morning after any recent change in this part of the code I get errors that I have problems. Any ideas on how to get this past or what is causing it please?

  Photo of part of the attached fault code.

  (Loop on the right is normally recorded shirft, but is not currently facilitate debugging).

  Finally found the problem.

  Because my table of numeric values was so small in width, I saw only a figure because I expect only the width to a figure.

  In one of the structures of the event, I wrote the number 030 instead of 0 for the node property disable result with the above error.

  I learned from this mistake and my paintings a little wider. (This is a similar problem when you forget to look for the possible extra line in a control of the chain).

• Error after conversion or the copy of the label

  Not to mention that nodes of "cloned" property that disappears, seemingly solved in Labview 2012 (SP1), I have also a problem with the bewilderment of labels after conversions or copying.

  The problem occurs at least in the following situation:

  1. There is a property of a control node.

  2. the control is defined in a 'Type Def'.

  3. a label is attached on the right of the property node.

  4. the location of the label in the 'Type' Def is different (top-left, for example).

  5. to create the bug or the source is converted (for example Labview 2011 2012 Labview) or the property node is copied between sources.

  6. the label of the node property converted/copied now has moved to the top, above the property node.

  In Labview 2012 the solution for "cloned" property disappears nodes fixes also bug of bewilderment label for nodes of property.

  Moving labels can be quite annoying when you have relatively compact code in of many multiple stacked sequences and event handlers.

  ---

  I also had a separate problem with the location of the label once the font of labels is changed / converted, but have not yet checked if this still happens in 2012 of Labview.

  
  

• Label bewilderment after font change

  Below the error label bug mentioned previously (here).

  Description of bug:

  There is a bug of bewilderment label when you change the font (type / size) or change your default font, which can also occur when converting to a different version of LV on a different pc (with different environment settings). This bug lost labels horizontally, especially when the label is positioned at half way horizontally or even half vertically on either side of a node property or control / icon.

  It could be reasoned that the correct placement of the text after the font used is changed can be very hard to get the right to any programming environment.  At least one of the combinations: label on the right side of an element (property node, etc.), placed at halfway the portrait must be easy to position correctly well.  (horizontally at least)  Since this is where I put (intuitively) many of my labels for nodes of property that I would have this problem.  This bug has been present in BT at least several years.

  Hello Ettepet,

  The 1313256 of the CAR has been entered.

  On the other forum post I'll wait until he crossed the administrative part.
  I don't currently see in our internal system and have the link internal will allow me to keep the forum post updated (through the channels of support) on this post on the forum.

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• Remove the Configuration after adding to the models?

  Hello

  I wore as a result of the market-

  1. using the base OS say win2k3 model I've deployed a new configuration (full Clone)

  2. I installed my software and other things on the deployment configuration, and then I want to use this Configuration of my Gold, so I added this to the models.

  3. now after adding (2) for models can I delete above configuration? Which will cause no problem in my model that was created in step 2?

  Kind regards

  esxvmuser

  You can remove anything in LM without worrying from clones of this element.  On the backend, Lab Manager removes only the files that have no dependencies.  So the deletion of your configuration will remove LM but not ruin your model because the files of this model depends on are not removed until all dependencies are removed.

  Dependence of follow-up and asynchronous operation garbage collection nodes are important elements of the LM system.

• Call for ensureIndexIsVisible after adding items to the dataProvider

  Hello

  I have a strange behavior where call ensureIndexIsVisible does not show the correct item.

  Did I miss the correct event to listen to after adding items to the list data provider?

  Description:

  I use spark.components.List with a HorizontalLayout to display my data.

  My data is displayed using the ItemRenderer.

  After the addition of new elements to the dataProvider, I register the Event.RENDER and within this handler, I call ensureIndexIsVisible and cancel the registration to this event.

  Add some data to dataProvider - some elements of thousnd

  list.dataProvider.add (...)

  list.addEventListener (Event.RENDER,

  function renderHandler(e:Event):void

  {

  show index

  list.ensureIndexIsVisible (indexToShow);

  list.removeEventListener (Event.RENDER, renderHandler);

  });

  I made the debug:

  1. If I comment removeEventListener, it will eventually work after some time the event fires.

  2. the original location that I see is a few points behind so if I scroll a bit I can find the desired article

  Thank you

  Roy.

  This blog can be useful: http://flexponential.com/2011/02/13/scrolling-to-the-bottom-of-a-spark-list/

• Get error FRM-92101 after adding a node of the Web to an existing Instance.

  Hello
  
  I added a node of the web to R12 existing EBS who already have a node of the Web. After I added the node, I get the error FRM-92101 while opening one of the nodes in the web forms. Before adding the new web level there is no problem with the forms. I ran the new autoconfig from all nodes again but the problem is still there. I am able to open the login page of two nodes, but only the question is coming with the forms. Am I missing somethig? Any suggestion please.
  
  
  Thank you
  
  Shashi.

  Hello

  Now that I've added the node of the Web 2 Finally using auto clone and adadnode.pl scripts. Therefore all URLs accessing EBS of browser web are to redirect to the Web node 2, no matter if I have access to the application of Web node 1 or Web 2.

  Did you run the AutoConfig successfully on both nodes?

  Seems something must be corrected in the context file or the database for other FND tables. I don't know why it's happening. Please help me.

  I still wonder why you have not enabled the file application.log until now. So, please report it the full error log here.

  Thank you
  Hussein

• Cannot remove items under My Documents / my pictures on the right by clicking on them.

  PRIORITY: HIGH

  Go to: start > Documents > My Documents / my pictures > right click on any of the two does nothing. And if there are other items below. Make a right click does nothing no more. [Unable to remove items under My Documents / my pictures on the right by clicking on them.]

  Also normally if you go to: start > Documents > My Documents / my pictures and click right you get the Options of OPEN / EXPLORE. That does not appear...

  Ran this fix and it did not help...

  'Restore the right context Menu' http://www.kellys-korner-xp.com/xp_tweaks2.htm

  The thing seems is to have made it. A. after I have installed and run a free Scan PC-Matic of PCPitStop Contributing to tell you... The reason why your computer may run slowly.

  No error messages have been made. Just the LOSS of this function.

  Sincererly, Ralph

  try a system restore to an earlier date.

• I get 80244o1c error after updated windows update

  I recently used the reformat windows 8 setting, "all remove and reinstall windows.

  I have had no problems or issues with the process until I've decided to use windows update to install the necessary updates.

  Update Windows prompted me to upgrade to the latest version. I then downloaded and installed the update and it told me that windows update will automatically close and open again. After the update I went and go to check updates. I filled the boxes updates, I want to install the first. I have install updated partially because I don't have the best internet speed to download all updates at once. But after installing the updates I get only error 8024401c. I tried to use the Troubleshoot utility and restart the computer when you are finished, but I still get the error. I tried all of the solutions in this link http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-update-error-code-8024401c/f8b9dc5f-a512-4e74-b41c-d357ca40f9f7. But still nothing.

  Help, please.

  P.S

  I also tried to reset (delete everything and reinstall windows) several times and the recovery of a option restore point until I started the update from windows update. But still no luck.

  Hi Justin,

  Thanks for posting your query on the Microsoft Community.

  I appreciate your troubleshooting steps.

  As you said you get a 8024401C error after installing Windows updates.

  I need some information.

  1. What is the brand and model of your computer?
  2. Do you remember the numbers KB installed updates?
  3. What happened when you performed the reset and restore? Do you have an error code or message?

  I suggest you to please provide us with the number of the last update that you have installed on your computer.

  See the link given below to find the number of the update through view update history. Please refer to the appropriate section (how can I find out what updates have been installed).

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Try the methods.

  Method 1:

  As you have already tried to reinstall your Windows, I still once suggest to run the system update tool as system update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008.

  See the link below for the procedure:
  http://support.Microsoft.com/kb/947821

  Method 2:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.