Labelling of locations

Similar Questions

• HP Pavilion DV7t-6100 impossible to locate bat software

  Hello

  After hours of research, I have been unable to locate the proper document to re - install my software of beats. I had to reformat my computer and use a copy of windows OEM 7 due to the recovery media not recgonizing my laptop as a HP laptop.

  I'm ok with the inconvenience less this block one road. I tried to install the audio driver IDT ( http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101114-1&cc=us&dlc=en&lc=en... ), but unfortunately the beats software does not install.

  Any help would be appreciated.

  Thank you

  Hello:

  Please see if one of these threads resolved to help.

  http://h30434.www3.hp.com/t5/forums/searchpage/tab/message?filter=labels%2Clocation&location=forum-board%3ASound&q=Beats+software#/?solved=true&location=forum-board%3ASound&q=Beats+software&search_type=thread&filter=labels%2Clocation%2CsolvedThreads

• How to read a label on the stage of in a symbol

  Hi Edgefriends,

  I'm working on a side project lead, but I have zero experience with JavaScript and I can't seem to get this to work without him so I hope someone can help me to achieve this.

  Below you see the code that I need help. It is part of a symbol on the stage. What I need to do is to play a label ("subFontsTitels") located on the level of the stage. I tried a lot of posibilities but without (good) results. Could you please help me?

  Part of the code:

  Symbol.bindElementAction (compId, NomSymbole, "${_Button} ', 'click', function (sym, e) {})

  read the chronology of the given position (ms or label)

  sym.getComposition () .getStage ().sym.play ('subFontsTitels');

  Insert the code for the mouse, click here

  });

  End of binding edge

  Hi, Rangata01-

  You're close enough.  Tell him in your symbol:

  useful only if your symbol is a level down

  sym.getParentSymbol () ("myLabel") .play;

  can be used any level

  sym.getComposition () .getStage () ("myLabel") .play;

  Hope that helps,

  -Elaine

• Access to a label

  Here is the layout.

  Scene1 > movieclip1 > movieclip2

  So I'm in 'movieclip2', which is located in "movieclip1."

  Inside the movieclip2, I have "button1_btn."

  What I want to do is when I click on "button1_btn" I want it to play it under the label "Label1", located on Scene1.

  How do I do reference this to play a label in Scene1?

  use:

  MovieClip (parent.parent) .gotoAndPlay ("label1");

  or, if you have more than 1 scene: MovieClip (parent.parent) .gotoAndPlay ("label1", "Scene1");

  based on listener of your button.

• I need to play a label then go straight into playing another label

  Here is my configuration Scene1 > mc1 > mc2 > mc3 > mc4.
  
  I'm in mc4 and I have a button when you click on taking me in a label "Label1. Now, I also have a label "label2" located in mc2.
  
  What I'm trying to understand is how to play "label2" located in mc2 right after that "Label1" is played. I need the code!
  
  I need help quickly please!

  You are welcome.

  Mark this thread as answered, if you still can.

• Where are the labels of image in CS4?

  CS4 is pretty great to this day except the panels are a little bugs. Does anyone know where the image labels are located now? Can't find it nowhere I opened an old file that has them and I can get to them in CS4.

  so OK for some reason, it got stuck on the properties of text and wouldn't change the image properties or properties of the document when I clicked in other areas... another bug...

• Hide the button label Radio via Javascript

  Aloah,
  
  I have a problem with the cache one option button and label.
  
  Location:
  
  I have two groups of Radio with 3 radio buttons.
  Click on a radio button within the first group, I would like to hide the 2 buttons in the second.
  
  I tried the x_ToggleItem of javascript functions, the x_Hide and the x_ToggleItemRow.
  But all the functions to do the same thing:
  They hide only the button (input type), but not the label (not the Label of the Radio group, but the radio button label).
  
  So my question is:
  How to hide the button Radio WITH his label?
  Or: How I address the label in JavaScript?
  
  PS: in the future I will bore you guys more often with questions: P
  
  MFG,
  Andi

  Hello Andi,

  The problem is that the current implementation of the input element radio group and the label are "separated". There is no common parent (as it should be IMHO).

  But there is... jQuery. Using jQuery you can hide an element with the id and hide the label using the next() method.

  If something like this (where P13_RG1_3 is the 3rd option in a radiogroup):

  $('#P13_RG1_3').hide (); $('#P13_RG1_3').next () .hide ();

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Skype for windows xp sp3 64/32 bit

  Why can't this thing work on windows xp. What I get from trying to download it is code 1603. Can I get help on this pls.

  Ty

  Respectfully, windows XP is out of support April 2014, and don't expect a newer software to work correctly on XP. (The chrome browser for example has an end of life from April 2016).

  As for the question, there are a multitude of messages about the exact same question on this forum as well as many others:

  http://community.Skype.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=catego...

  Last Skype is 7.14 here: http://www.skype.com/go/getskype

  On another note, please consider another OS (depending on what you like as long as it is a current), Windows XP is no longer supported, which makes secure and potentially dangerous use (for you and others). I have run Windows 10 on 10 years + old computer, and it works (don't no lightening fast No.), so it is possible.

  Also, be sure to update your flash player to plug the holes as much as possible:

  https://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Error Code BIOHD-2 disk hard don't Test no drive detected

  I'm working on a HP Pavilion p6214y desktop PC.

  Just to list the specifications for any unusual problems:

  OS = Windows 7 Home Premium 64-bit

  MB = HP P/n: 513430-002 with AMD Athlon II x 4 620 Quad Core

  HD = Western Digital 1 TB

  Power = 350W LiteOn

  RAM = 8 G

  I get a blue screen that displays the 4 options and I chose F9 for diagnosis and he gave me a BIOHD-2 error code when checking the hard drive. He said that no hard drives have been detected. I read about it here and checked the bios and it does not find the hard drive. If most people say it's a bad hard drive. Although I put the drive in another computer and I can get the files from the hard drive and view them. It detects the drive in the bios. I also put a disc hard work of the other computer in this HP and it will not recognize a hard drive via the bios.  Given that the motherboard does not recognize HDD through sata ports I guess a mother board failure. I then put in a usb bootable Ubuntu 12.10 version. He turns round and will have access to the internet and everything. So, my little knowledge, means that the motherboard is still okay, right?  I don't think I read everywhere that the motherboard can go wrong only to sata ports. Anyone know if this is a possibility? Is there a chance that I could save the situation by buying a set of recovery disc for this model precise and just reinstall everything? I heard that they are usually $ 20, then it would be a good trial and error.

  In addition, it will allow recovery sometimes on the blue screen screen, but he won't do anything because the keyboard stops working at this time.

  Just another tech junkie.

  Hello:

  If you use ubuntu since the USB drive and not the hard drive, then Yes, there is a real possibility that the motherboard sata controller has failed.

  I think the motherboard of your model is notorious for failures of controller sata as evidenced in these numerous threads below.

  http://h30434.www3.HP.com/T5/forums/SearchPage/Tab/Message?Filter=labels%2Clocation&location=Category%3ADesktopPC&q=M2N78-la+.

• EA2700 Firmware Upgrade for the installer using Internet Explorer 11

  I can't login is no longer in my EA2700 settings since I upgraded to IE11.  He told me that the browser is not supported.  I was able to connect from another computer to see if there is a firmware update, but found nothing.

  Does anyone have an idea if there will be an update of the firmware?  I suspect that this problem will continue to worsen with other browsers, once they get the updates.

  Thank you

  Joe

  Just search...

  http://community.Linksys.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=foru...

• p6211f hard drive failure or motherboard chipset - no boot - cant factory reset

  I worked with my friends HP Desktop p6211f for two days now trying to solve the problems start where the main message was reguarding please insert bootable media.  This machine has been maintained by me and bestbuy for virus a few times so it is a prime suspect.  The problem is that the recovery media fails @ 8% with the error 0xe0ef0003

  Hardware HP F9 diagnosis reveals Smart errors ranging from BIOHD-3 and now BIOHD-8 BIOHD-1

  Suspecting a bootloader or simular virus we decided to try the back when we first met the error of 8% indicated above.  I replaced the SATA drive to origional WD 5000AADS (WD Green with AF) with a capacity of 500G also even SATA WD 5000AAKS.  This new disk actually started in windows as it has been previously loaded.  The choice to keep this copy of windows or the rest of the plant, it was decided to factory reset that after the recovery of the disc error was left in a State that doesn't start raining.

  I tried to change the SATA to IDE modes and also tried to change the drive cable with a good known as cable replacement of the drive with my own staff known good disk.  My drive BSOD after logo loading, normal since this window of Windows has been installed on different hardware.

  It has come to my attention of a few Documenhts from HP that the recovery media was probably linked to the new format of addvanced AF with 4 KB vs 512 k sectors, whereas if I replace the drive by another AF I should be good to factory reset?

  My concern is that some messages on the reguarding BIOHD1 through 3 form that replaces the hard drive works sometimes for a few months and then fails, but the real problem is that the faulty motherboard.  I don't want my friend to pay for the drive and it does not work, or it does not, but only for a few months until the bios cannot communicate with him again.

  Test CPU and tests of memory are ok.  DVD rom as well, that there is no other material other then a wifi card and hard drive.

  I can't find the list of motherboards pavilion recalled to check if this Pegation M2N78 - figure.

  Can someone advice me about the best next step.  Can I replace with another drive that is compatible AF or do I have to replace the motherboard.

  Hello:

  I think the motherboard of your model is notorious for failures of controller sata as evidenced in these numerous threads below.

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=categor... +

• ERROR: no boot disk was detected or the disc has failrd

  HP ENVY h8-1534pc with windows 8.

  error: no boot disk was detected or the drive failed.

  tried to run the recovery cd ROM even error. No cd or hard drve no indication in the boot order.

  out of resources

  Hello! Here are a few responses from members of the forum about your problem. See if you can find a solution from them. http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AOSandSW&q=no+boot+disk+has+been+detected

  Dokie!

  PS It doesn't look good for me. Good luck and thanks for posting back.

  It has been my experience in the past that a message as this means that either the operating system is corrupt or your hard drive is dead. If your hard drive does not show in the boot order, it's a major sign of a bad HD, but not100%.  There are several free testers HD. Most have the back, which means that you don't have to have an operating system to start their. If you are not able to test your HD with F2 or F11 functions, try one of them. You will need to burn an ISO to a CD file.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  PS2 there may be answers best of the latter. Weekends are slow at times. I'm still slow

• The QML App charts

  Hi all!!!

  I am creating a QML app to view some data (using a rest service).

  Is there any loan (C++) library or plugin for this?

  Can I use a javascript plugin in my page QML?

  No there is no integrated graphics API.

  There are some 2D graphics libraries...

  http://developer.BlackBerry.com/native/documentation/core/library_support_at_a_glance.html

  And for the simple bar charts you can use QML containers with different color background.

  Also do a search on cards will also come up with a number other suggestions in the same direction...

  http://supportforums.BlackBerry.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&Locati...

• fixed height of LabelField

  I create the title page with a background.  I would like to put a background to a certain height.  To do this, I guess I have to adjust the height of the label field?  However, I don't want to increase the size of the text.  The label is located within a HorizontalFieldManager.

  I have read that I need to extend LabelField, I already did for painting, how I do for height?

  Check out these articles in the KB.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...