LabView 2011 Application launched as COM server via the Application Delphi lance is more if installed under 64 bit, Win 7

Similar Questions

• deploy a virtual machine for the model stored in EXSI server via the command line

  Hello

  Is it possible to deploy a vm from a template stored in exsi server via the command line?

  The structure is shown in the attached picture. I want to deploy the model under "Templates" folder to a virtual machine "VM" sub-folder by command line of any machine.

  

  Hello

  PowerCLI can help you achieve this goal. Using PowerCLI, you can deploy remote host model.

  Here is an example for the same.

  http://www.harryjohn.org/deploy-multiple-VMs-from-template/

• 9.30 NIDAQ drivers not install LabVIEW 2011 - example. Microsoft .com's in LabVIEW 2010 under vi.llb

  I just upgraded to LabVIEW 2011 without uninstalling LabVIEW 2010.  I downloaded the last set of drivers DAQmx 9.30.  I find that these drivers are installed in a DAQmx folder under the vi.llb of theLabVIEW 2010 and NOT in the vi.llb of LabVIEW 2011.  The DAQmx features do not appear on the menus and the existing instances are reported as 'cannot be compiled. How can I get the DAQmx functions to properly install LabVIEW 2011?

  You must DAQmx 9.4.

  9.4 DAQmx

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• Could not start the server via the SOA node Manager

  Hi all
  
  I try to install AIA 11.1.1.6.0 on top of the SOA Suite 11.1.1.6.0.
  
  I was able to install the weblogic, UCR, soa and osb servers server correctly. Now, before installing the AIA, the document I am following it says, make sure to start the server soa through the Manager of nodes.
  
  Now I start to the administrator of the server, then the node Manager, to make sure I checked the node Manager is in place, I logged the weblogic console, went to the Machines, and I see that it's upward and accessible.
  
  Now using WLST commands, first of all, I have connected to Manager nodes by using the nmConnect() command, so I try to start the server soa through node Manager with the command start ('soa_server1').
  
  I get an error when you try to start the server with the command nmStart() soa, below is the error message...
  
  «Error at startup server soa_server1: weblogic.nodemanager.NMException: Exception when starting Server «soa_server1»»
  
  I ran the command dumpStack(), and I get the output as 'no trace available battery.
  
  If I am able to start the server soa through the node Manager, I can go ahead and install the pack of AIA, but wrong to let me go forward.
  
  I also tried to boot the server from soa through the weblogic console, go to the servers tab, select the soa_server1 and start, the State of the soa server will "FAILED_NOT_RESTARTABLE".
  
  I followed some of those blogs like...
  
  http://Neeraj-SOA-tips.blogspot.com/2010/06/starting-admin-and-managed-servers.html
  
  http://www.javamonamour.org/2011/09/nmconnect-nmstart-nmkill.html
  
  Experts, please give your opinion.
  
  Thank you very much
  N

  Hi Patricia,

  I had exactly the same problem some time ago...

  The cause:
  There are two servers trying to run in debug mode and use the same debug port
  -Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = n

  Possible solutions:
  1. turn off debugging (this is what I did)
  2 use the various debugging ports to different servers (difficult to do because the servers share the same scripts)

  What worked for me was:
  1. in % DOMAIN_HOME%\bin, I created a script called startWebLogic_nodebug.cmd with the following content:
  %CD%\bin\startWebLogic.cmd /nodebug % *.
  2. in nodemanager.properties, I changed the following property
  StartScriptName = startWebLogic_nodebug.cmd

  Now my servers start without debugging...

  I hope this helps.

  See you soon,.
  Vlad

• V5 vSphere Client VI - connectivity to vCenter Server via the non-ideal DNS configuration

  Here's a theoretical question that I fight for an answer at the bottom.   For example, the question is:
  ..
  You have a VI Client in Active Directory (AD) domain n ° 1 with its own DNS, DNS #1 System.
  You have a server vCenter and ESX hosts in AD #2 with its own system DNS, DNS #2 domain
  The vCenter server and esx in AD #2 servers have DNS entries in DNS as follows #2...
  vcenter1. DNS2.com
  Esx1.DNS2.com
  ESX2. DNS2.com
  However, in AD #1 the same servers have entered DNS DNS #1 as follows...
  vcenter1. DNS1.com
  Esx1.DNS1.com
  ESX2. DNS1.com
  The VI in AD #1 client must connect properly on the vCenter server, using the DNS #1 name vcenter1.dns1.com.   It's pretty obvious.  However, what happens when you start a console KVM remotely to one of the virtual machines on VMware ESX Server?  I don't think it'll work.  I think that the VI client is trying to communicate with the service console of the ESX Server hosting the virtual machine by using the DNS entry of the ESX Server that is known to vCenter server, IE esx1.dns2.com, which is not a FULL domain name in the DNS # 1 VI client.
  I need to review this issue for VC2.5U6 with ESX 3.5U5 and an implementation of vSphere 5, even though I think that it is the same for all versions.   Incidentally, I read KB749640, talking about DNS but I don't think it covers where the VI client is a DNS domain disparate with DNS names of the esx servers different to the one known by the VC server.
  I hope the above is clear.  Can develop if necessary
  Thank you, Jan

  ESX host name is esx1.test.com.

  In provided customer vSphre the hostname for connectivity is different. for example: esx1.prod.com, however this name is directed to the same host with intellectual property.

  To do this, we edit hosts file c:\WINDOWS\system32\drivers\etc\hosts.

• space management of configured storage server via the 3rd customer of SMI-S Group

  Does anyone know of a way of being able to manage a 2012r2 window server configured with storage space, acting as a storage array, with a 3rd party customer SMI-S?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• LabVIEW application developed on windows can be installed under linux?

  Hi all

  I use suite developer LabVIEW 2009 on windows 7 PC. I was wondering if the application created with labview on PC can be deployed on the linux platform? If not, is it possible to develop the LabVIEW application on windows to deploy on linux platform?

  I was also wondering if computers single-board as Beagleboard, Raspberry Pi are loaded with linux, labview application can be deployed on these computers?

  (in simpler words, I wonder, with existing suite of Labview 2009 developer on windows, can I develop a data acquisition application and deploy it on single-board computers that have linux installed on them.)

  Thank you!

  Nilesh-

  To create an exe on a Linux platform, you need LabVIEW for Linux with its application builder. You can open the source on the Linux machine.

• Error in the configuration of DNS server via the netsh command

  When I configure a local DNS server for my test-domain with the netsh command
  netsh interface ip set dns name = "LAN connection" source = static addr = 192.168.1.105
  I get a messge for error (translated from German):
  The DNS server is wrong or does not exist.

  But the local configuration of the DNS server always works perfect afterwards.
  The question now is: what netsh like not on my DNS server to produce this error?

  I get the same message too and the command works perfectly every time. It's probably a timing issue. I would ignore it.

• What are the requirements for the use of Sql Developer with MS SQL Server via the JDBC MS driver?

  I tried to add

  sqljdbc_4.0\enu\sqljdbc4.jar

  or

  sqljdbc_4.0\enu\sqljdbc.jar

  or both

  in part 3d driver JDBC list in properties, but there is no tab in the connection dialog box create.

  Just for a test, I added IBM's JTOpen driver and a new tab of the DB2 appeared immediately.

  What should I do to be able to create connections to MS SQL?

  Use the correct driver, jTDS 1.3

  http://www.Oracle.com/technetwork/database/migration/JDBC-migration-1923524.html

• Control CMD (command line interface) using Labview 2011.

  Hello

  I'm trying to control software that has an interface to command line using LabView 2011 but I have problems when reading the information.

  Is attached the VI I created so far, but it is not working properly.

  Problems so far:

  1 - if I use ReadLine(), it blocks showing no error and nothing else.

  2 - ReadToEnd () same problem as the previous line, the software hangs just at this stage.

  3 - if I compare the response of the "peek" in waiting for the - 1 indicating there is not more character, the hook of software as the previous steps.

  You have some clues as to what might be wrong or another way to 'control' the CMD to send messages, read and send messages, etc...

  Thank you very much for your help.

  I've done it before - I posted about this on the forum here: https://forums.ni.com/t5/LabVIEW/How-to-open-close-and-monitor-a-application-xyz-exe-using/m-p/32511...

  I did also wrap in a library at a given time and post it on the forums, but I couldn't find this particular post.

• LabVIEW 2011 Web services

  Hello

  I developed a main application, which is streaming the output array via the shared network for small application variable that streaming even table in XML format as a web service.

  It was running fine when an installer in LabVIEW 2010.

  But now I'm doing an installer in LabVIEW 2011, application running on the remote computer and can see web service deployed in / National Instruments/aws/folder.

  I don't see any any given, & distributed manager says good quality of variable deployment shared.

  Is there any specfic in LabVIEW 2011 changes to an installation program.

  Thank you

  Puneet

  Yes, my request has deployed all the variable and have seen all healthy in Distributed System Manager.

• Windows 7 64 bit Pro connects to SQL Server on the Windows Server 2008 R2 Standard domain

  I put upgraded to Windows 7 Professional computers to Windows XP Professional, but I have a problem with getting one of software programs management of stock that allows us to connect to our SQL Server 2008 R2 Standard Windows on new Windows 7 computers.

  Our computers are connected to a domain, and therefore SQL Server. Computers Windows XP allows each user to standard domain to connect and to connect to SQL Server via the stock management software.

  But on the standard domain of Windows 7 Pro computer users unable to connect to SQL Server, but administrator accounts of area on the same Windows 7 Pro computers can connect to SQL Server through the inventory control program.

  I have set up the alias of the server, the server name and port number via the SQL Server Client Network utility ( cliconfg.exe ) so I know this isn't the problem because it works when I'm logged on as a domain administrator.

  There seems to be something to do with permissions of user domain and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that does not allow standard domain users to connect to a SQL Server. But I can't find anything about and cannot practice how to solve this problem, except to make all users, domain administrators that is obviously not a good thing to do. So basically I think I need to create a group policy that allows users to connect to SQL Server, but I have no experience in doing this and don't know where to start.

  Thank you for all that you guys help and I hope someone can give me the solution to this problem.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Does not open the files shared via the command run

  We use a server in our Organization and we can connect to this server using RDP. But when we try to access shared files and folders in this server via the command run in the client by entering the IP address of the server asks it enter network password, and we enter the right username and password (I'm sure that I entered the password and user name correct to 100%) it displays 'failed to connect '. ': unknown username or bad password ". and if we took the same user name and password via RDP it will easily connect without any error. Please give us the solution for this problem.

  Kind regards

  Vijay Kumar C.M.

  Left thread (files, folders, and online storage) for (web and networks).

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb250589.aspx

  Thank you.

• BlackBerry, call web services via the SSL protocol

  Hi guys,.

  We are developing an application BlackBerry to OS 4.1 and we test it on the 8330.  This application calls several web services on a remote server via the SSL Protocol (side).  There is a valid certificate from Entrust installed on the remote server - it works properly with all major desktop browsers.  The certificate has not been installed on the BES - is it necessary?  Some BlackBerry devices will be linked to a company BES, others not.

  When the application calls the web service, a window opens with the following message: "you try to open a secure connection, but the server certificate is not approved."  Continue to push works fine, but the window opens again a few moments later.  Pushing view certificate indicates that the certificate is considered invalid ('unverifiable Cert chain').  The same information is given when you navigate to the certificates of the aircraft.  Certificate trust pushing watch a 2nd window asking you the key Store password, which we are not aware of.

  You guys can help us with this?

  Thank you!

  We have solved the problem.  It seems that the BlackBerry device is having a hard time with a certificate signed by the Entrust 2048 bit root certificate.  Give us a new intermediate certificate signed by their 1024-bit root certificate, which we have installed on our Apache server.  While the window 'certificate is not approved' arises at once, pushing "Continue" worked and it never came up again.  To do this, it will probably install the certificate on the BES, something we don't have yet.

  Thank you for taking the time to answer!