LabVIEW can access a HTTPS site behind a proxy?
I tried to use LabVIEW to access an https through our firewall/proxy business site and were unable to operate. Anyone has any experience with this and or should this be possible?
With success, I was able to get the LV websites (http and https) access without going through a firewall and through messages on these forums figured out how to access http site through the firewall, but have developed in white when you try all https sites. Here are a few test cases, I've tried. All these sites are easily accessible via browsers, so it is not because of the firewall/proxy iblocking.
Any help would be appreciated,
-Harold
Well, now I understand your configuration. Unfortunately the HTTP client supports only the tunneling proxies (sometimes called gateway proxies, those who accept a connection and then move the application to another server without modifying it) because they occur without intervention of the customer. It is not supported for HTTP proxy servers (sometimes called proxies forward) which, as you have noticed, ask the customer to send a CONNECTION request to the proxy via the SSL protocol.
To use the HTTP client here, you must configure your proxy to accept HTTPS connections on a different port using a valid SSL certificate and then forward these requests to the remote server as a proxy tunneling.
Tags: NI Software
Similar Questions
-
Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.
I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.
I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1
Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.
-
I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.
My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.
-
One of the computers on the local network Windows XP cannot access a http site.
I ping to the alpha-numeric address (on this computer) and ping uses a private IP address: 198.168.88.68 (all packages are lost).
All computers on the LAN access correctly.
When I ping at the same alphanumeric address on other computers
They ping 204.38.19.76 and I successfully received all return packages.
I connect using my Internet provider ADSL router. I know it does NAT and all my LAN computers get their IP addresses dynamically.
I thought it was a problem of Internet Explorer, but after I discovered the computer resolves the ip address for the external address as a private IP address. I force the PC to get another IP address and also I had used: ipconfig/release, ipconfig / renew. And even by configuring it with a static ip address does not work.
Hello
I can solve it only in this way https://www.region9.telcel.com/smartdistribuidores/
This is a secure (via https) site. seems to be a subdomain of http://www.telcel.com.
Maybe this can help, http://support.microsoft.com/kb/813444
Otherwise, you should try to talk to http://www.telcel.com support
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Can access the IIS sites only from localhost
I have a problem with IIS, when I publish a page on this subject, it is only available on the local host, for example:
localhost:80
Where 80 is the port, but I need to be able to access from outside the PC. Using anything other then localhost, as name of intellectual property or PC does not work. I get the error connection reset. I have disabled the firewall. It still does not. When using the command netstat - ano, I get the result that the site is listening on the address 127.0.0.1 and the port which I define in the bindings for the site. Even if I type in my IP in the links he always does this. I have no idea what to do now. Even the default ISS page not available.
But when I install an Apache Server or tomcat I can access them without any problem from the outside.
If anyone has any idea please help. I have a single network adapter.
Try asking in the forum IIS:
http://forums.IIS.NET/ -
FiddlerRoot not only does not allow https certificates, but also resets my proxy once I put it back. This is consistent, and I worked through all the expertise "of solutions." This is a ridiculous piece of code and severely limited my internet capabilities.
Hello, no authentic firefox downloads from mozilla.org does contain fiddlerroot - could have downloaded adware from a rogue site.
go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.
-
Windows 8 worked well without problems. So I think some updates were automatically installed and now none of the 3 browsers work. Network utilities show always the computer is connected to the internet, but the speed tests it does not at all. Our other computer with Windows 8 ceased to be able to access the internet at the same time.
I tried to restore to a previous restore point, but it is still not possible to access the internet.
Thank you!
After making back all Microsoft updates and spend 4 hours on the line with the support of Microsoft, we have reduced to eSet having a service that forbade access to the internet, even if we have disabled the firewall. Stopping this service restored internet access.
eSet has been marked as compatible on different Web sites, but check on eSet they revealed there are questions.
Initially things worked but eSet must have updated something that caused problems.
-
Windows 7 64 bit
ESET antivirus
The sites in question are all the sites I've used frequently, they are reliable. When I read the page details on caution at least a site had a valid certificate based on the dates. The reasons given don't are not all "expired" there are several others. Here's another example:
www.bankofamerica.com uses an invalid security certificate.The certificate is not approved, because no sender string has been provided.
(Error code: sec_error_unknown_issuer)
Thank you for pointing me in the right direction. With your help, I was able to fix the problem.
-
Internet explore 8
How your problem is related to Windows Update (compared to the Windows upgrade)?
See...
How to troubleshoot network connectivity problems in Internet Explorer
[ignore the reference to IE7 or Vista in the section will APPLY to]
http://support.Microsoft.com/kb/936211See also http://support.microsoft.com/kb/967896
Specific Forum on Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Unable to access SSL Web site when company proxy use man-in-the-middle attack to scan SSL traffic
Our company uses a proxy server that analyzes the SSL traffic on web sites. This is done via man-in-the-middle attack. The proxy generates a new certificate on the fly that it sends to the client, impersonate a secure server.
After upgrading from Firefox 10.0, I always get error:
Error HTTP Status: 400 Bad Request
After the confirmation of a security exception.Maybe this is related to the difficulties of the attack of the BEAST bug (browser exploit against SSL/TLS)
- bug 702111 - intolerant servers to record split of 1: n-1. "The connection was reset" (see also the comment 60)
-
Firefox is unable to access all the pages of an HTTPS site.
We have a computer cannot access all the pages on a specific HTTPS site. I don't want to advertise the URL here. "" We can connect to the site and navagate to half pages, but the other half give ' (error code: sec_error_unknown_issuer). We have uninstalled FF and spilled the appdata. Renamed the cert db and he had to recreate. IE working on it from that computer to the website. All computers in the office can access the web site without any problems, some using ESR some with regular FF. This system uses the latest version of FF ESR, but we also tried the regular version. The only thing we haven't tried is disable the AV (Symantic). One thing I noticed, is that the URL of this web site are extremely long.
Why the FF honors cert for some pages but not others. It also does us not add an exception.
Thank you
Mesept
The first thing I checked was the cert chain, all certificates are valid. Time on computers is very good, the second thing I checked.
As I said in a previous post, a few pages work, some do not which means that certificates are valid for certain pages, may not be a problem of cert, sometimes they work. Same site also works with IE and chrome on the same systems.
Cannot ignore and accept the cert in he won't let me. Which is off and I don't know how to turn it on.
In any case, I submitted a ticket for the owners of the website last week and now everything works.
Thanks for the answers that I don't have a resolution, I guess that developers found a bug and fixed it.
-
I was able to access hotmail account every day except today I tried several times to connect to the site on the Web page, but internet Explorer comes up with the error message that it cannot connect to the Web site. I tried a diagnostic check on my end, and nothing seems to be wrong. I can access other Web sites. I tried the suggested methods to clear my browser which has been online on the microsoft answers site. Nothing has done so far.
Status of Hotmail:
https://status.live.com/detail/HotmailFor now, it is said there is a problem:
"Hotmail is having connection problems. You might see an error message when you try to connect. »You can try to check your email at a later date.
-
Cannot access some sites behind the pix515e
I started my CISCO PIX 515e in July 2004 with a minimum configuration. The only change I made was to introduce the syslog and 3COM tftp server. Two weeks after my Internet (browsers) users (inside) began to have problems of access to certain sites for example google.com, cnn.com etc when I bypass the firewall, they can access all the sites. When I place them behind the firewall again they cannot access the same places. It seems to me that the firewall is the cause. This could be the cause?
Without seeing your config, it is hard to say, but a proposal, I'd say you're probably out of translation addresses. The PIX must create a translation for the traffic as it comes out, and she does that based on nat/global orders, you have in there. Let's say you have the following:
Global 1 200.1.1.1 - 200.1.1.254 (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Then, this indicates the PIX to translate any internal address to 200.1.1.x he died. If all of these 254 global addresses be used however the next person who tries to go out will be denied. If you look at your syslog server, you will see a message like "Unable to create translation."
If you change it above to:
Global 1 200.1.1.1 - 200.1.1.253 (outside)
Global 1 200.1.1.254 (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
then the first 253 users that come out will have their packages would NAT, then all of the other packages will be PAT had to the 200.1.1.254 address, giving you an extra 65, 000 - odd outbound connections.
If that's not enough (remember that only the user going to a few web sites can open connections to 20-30), then you can change the above to the following:
Global 1 200.1.1.1 - 200.1.1.252 (outside)
Global 1 200.1.1.253 (outside)
Global 1 200.1.1.254 (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
giving you a 65, 000 - odd additional translations and so on.
Other than that, we would need to see your Setup and your messages to syslog (in the debug level) when these users can't get out.
-
* Original title: it just that chat site which gave me a HRT page cannot display so I click fix coinection problems and he gave me your dns server may be unvailiable
This is a chat site called babblesex problems, said Sunday and its been 5 days because I can't access the website but I can access to other sites just babblesex site and it still gives me this page cannot be displayed and your dns server can be unvaliable
This Web site indicates that babblesex is, in fact, down:
http://www.DownForEveryoneOrJustMe.com
http://www.DownForEveryoneOrJustMe.com/babblesex.com
Don
-
RV - 120W:how to refuse the user to access certain Web site via proxy server?
I block some website at the URL Blocking.But can access the Web site that I've blocked via proxy server?
Can I deny access user proxy server?
There a lot of proxy server, I can't block the proxy one by one.
You can use nat, do it selectively. So will not be able to bypass the proxy for outbound or unable to navigate, also the use of the port is using nat, and if no nat, they cannot see anything behind the proxy. If this does not work, also, you can monitor your network with tools like wireshark and blocking the packets to the proxy manually
Post edited by: Juan Diego Rodríguez Estrada. If this answer is satisfactory to you, please mark it as response. Thanks youMessage was edited by: Juan Diego Rodríguez Estrada. If this answer is satisfactory to you, please mark it as response. Thank you
Maybe you are looking for
-
I understand that I must download the "HP Print Service Plugin' to allow my new Samsung rating 4 empty wireless printing. I tried several times to download the app, but each time to fail with the following message ""HP Print Service Plugin "could not
-
a610n - fan error of the system after replacing the motherboard
Hi all I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought
-
Pavilion g6: HP Pavilion g series system disabled
When I start the system all of a sudden he asks me a password for administrator. I tried to guess the password and then it just says: System disabled with the following error code: 76207065 Please help, I need to solve this problem in all away today.
-
try to remove Dr watson from my computer to allow to use repair disk utility, I bought
Remember - this is a public forum so never post private information as tried to remove through add and remove program but don't let me and new software will not work until I have remove Dr. watsonemail or phone numbers! Ideas: You have problems with
-
How to restore the compatibility view
I can't now change the size of my fonts & color in outlook express & registered in Favorites web sites are not displayed correctly