Can access the IIS sites only from localhost

Similar Questions

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible

  When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?

  Hello

  Follow these steps to solve the problem.

  
  Step 1
  a. Click Start, default programs
  b. Click set your default programs
  c. Select your browser from the list
  d. Click set this program as default
  e. click OK.

  Then proceed as follows:

  
  Step 2
  a. click settings by default access and computer program Set
  b. click on continue if you see the user account control prompt.
  c. click Customize
  d. Select your browser from the list
  e. click OK.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Only when I try to connect to the hotmail Web site, internet explore said that he can not access the Web site?

  I was able to access hotmail account every day except today I tried several times to connect to the site on the Web page, but internet Explorer comes up with the error message that it cannot connect to the Web site.  I tried a diagnostic check on my end, and nothing seems to be wrong.  I can access other Web sites.  I tried the suggested methods to clear my browser which has been online on the microsoft answers site.  Nothing has done so far.

  Status of Hotmail:
  https://status.live.com/detail/Hotmail

  For now, it is said there is a problem:
  "Hotmail is having connection problems. You might see an error message when you try to connect. »

  You can try to check your email at a later date.

  For the taking in charge of Hotmail:

  http://windowslivehelp.com/product.aspx?ProductID=1

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Firefox can't play youtube videos (only from youtube, other video sites work well)

  Since about a week ago firefox in my laptop can not read the youtube videos (only from youtube, videos from other sites and flash games work well), both on the site or embedded on another site. This shows only "an error has occurred. "Please try again later".
  I use firefox 13.0.1 and the latest version of the flash plugin.
  My laptop is i5 with win7 64 bit and it has clean, no viruses or malware.

  I tried all the solution posted here, but nothing works.
  I tried to uninstall - reinstall both firefox and flash, disabled add-ons, safemode, downgrade from earlier, flash, uninstall realplayer, changed the dns, reconfigured my modem, my curse what ISP (perhaps connection related?), still unable to play videos from youtube.

  I tried to use different computer, I used my old pc winxp with the old version of firefox (with the same configuration as the firefox I use in my laptop) and my ipad, they can play videos, but playback is stuttering which never happened before.
  Curiously, I've tried chrome (on the same laptop) and it works well, no stutters.
  This problem has something to do with the firefox updates, updates, flash, both, or something else?

  Please help me, I don't want to go back and forth between browsers just to see the video on youtube and I really want to change browser.
  Thank you!

  It's very strange... it will also be a very long shot, but it is possible that due to the long url (& feature = relmfu) it worked. I highly doubt this is the case.

  I recommend not to clear your cookies, either of them or one of them to youtube.

  And you've probably already tried this, but playing the video on the various quality parameters may do something.

  And finally, have you tried to contact youtube/google on this subject, or restart your pc after making sure that all your stuff is up-to-date? (you have probably both)

• I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Out of several users on my computer only one can access the internet

  Original title: Internet connection

  There are several users on my computer, but only one of them can access the internet, pls help. THX Fred

  Hi Fred,.

  1. is it wired or wireless?

  2. what exactly happens when you try to connect to the internet? You receive an error message?

  3 did you do changes on the computer before the show?

  I suggest to follow the article and check if you can connect to the internet:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  You can also see the following article for more information on network problems:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reply with more information about the issue so that we can help you better.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• Can someone tell me how I can access the internet on my laptop to someone else's House?

  I want to take my computer on a visit, I can access the internet at home someone else with their supplier?

  Hi Huw,

  If it is a WIFI connection and they provide the access codes and Setup appropriate (and maybe even if they are not depending on how they are configured), it should be no problem.  You will probably need to create a new connection to connect to their network and possibly another new connection to connect to internet (if they are separated).  I created portable work of my wife to work from home in less than 5 minutes.

  If you need to connect with a cable, then you need a cable and they need a way to connect to their network or their internet connection or even a computer connected to the internet connection can be used by ICS to give you access (even once, after you have setup the proper connections and codes installation).

  The following may or may not be of help (although designed for Vista, you can get the general idea on their part and XP and W7will be similar and you should be able to work out the differences - if not, look how configure wireless internet access in "The BONES" of aid):

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links): http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista: http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista: http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf

  The truth is it is relatively easy and is done all the time by many people.  Think about all the people with laptops who take their origin and work at the same time and maybe even at Starbucks.

  I hope this helps.

  Good luck!

• Any time I try to access the web site GOOGLE, this message 404 not found (nginx)

  Any time I try to access the web site GOOGLE, this message appears.

  Any suggestions as to what is the cause and what is the fix.

  Thank you

  Hi LindaPhillion,

  1. Did you the latest changes on the computer?
  2. What web browser do you use?
  3. Are you having similar issue with any other search engine?

  You will usually receive this error when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Note: Above article also applies to Windows XP.

  Note: Try the step only if you are using the web browser Internet explorer below.

  Refer to the article below and try the steps mentioned, check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connection WIFI mobile phone to the laptop, so I can access the web of the cell

  My laptop is connected to the internet by internet dongle, I want to connect my cell phone to the laptop via WIFI so I can access the Internet from the mobile phone, how to put in place on windows 7?

  You can configure a network hosted with your Windows 7 machine. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  Assuming that your USB dongle is a device high-speed 3G / 4G, you might also look into buying a router. Some examples...

  http://3gstore.com/index.php?Main_Page=index&cPath=35

  The advantage of the router, it is that you need not the Win 7 PC all the time so that your other devices have access to the public internet.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• We can access the session scope variable just by using its name

  Java EE 6 tutorial contains a "Case Study of the Duke's Bookstore example". I did not understand after statements of this case study:
  
  * bookdetails. XHTML *.
  
  {code}
  < h:outputText value = "#{selected.title}" / >
  {code}
  
  * BookstoreBean.Java*
  
  {code}
  public String details() {}
  Context()
  . getExternalContext()
  . getSessionMap()
  .put)
  "selected."
  getFeatured());
  
  return ('bookdetails");
  }
  {code}
  
  I want to know we can access the defined in bookdetails.xhtml session variable by simply using his name as done previously?

  This is a feature of basic Expression Language (EL), it is not specific to JSF. And it is not specific to the scope of the session, or you can put the beans in any area (page, request, session, application, flash, conversation, regardless of how extensive custom that you create) and reference it using EL only his name. The thing you need to take care of, is that the bean lives in a scope, which can be done using JSF specific or files of configuration, through CDI, annotations or by manually setting the bean in a specific through Java code scope. It is flexible, that is the nature of the Java platform.