LabVIEW coaching in India

Similar Questions

• Max and LabView can communicate with the device series

  I'm trying to connect a balance Mettler - Toledo JL - 6001 to my computer as an entry for a LabView program through a RS-232 to USB line.

  In MAX, I get sometimes (but not always) the error message "the resource works correctly, but VISA cannot currently access."

  On the general tab for this port, I get the message' VISA returned this camera when searching for resources, and MAX was able to use VISA to analyze the resource name.  The resource was busy, so MAX could not successfully log on VISA to the device. »

  In LabView, the program runs, but I get all zeros as output which is definitely not correct.

  I tried deactivation and activation then the port. I tried making sure that no other program is using the device, and then restarting the computer.

  I'm not sure I have the correct driver installed for this scale (MTT coach), (they do a lot of balances and some pilots and was not sure than to use). I don't know if that makes a difference in MAX.

  A few tips for how to get balance and the MAX to communicate? Also, I know almost nothing about the transfer of digital data / series a response very dumbed down would be greatly appreciated.

  Thanks in advance,

  Joanna R Murphy

  Hello Joanna,

  Please take a look at this white paper. There are several solutions for this error.

  Best,

  Carmen C.

• File reading in Matlab, LabVIEW 2012

  Hello

  I am very new to LabVIEW and this could be a very simple question.

  I'm reading a simple labview .vi file in Matlab. I use the version of LabVIEW 2012 32 bit. I saved a file .vi and tried to load it into Matlab as mentioned inof LabVIEW in the MATLAB® environmentsection of http://digital.ni.com/public.nsf/websearch/2f8ed0f588e06be1862565a90066e9ba?Open Document. But I can't load the data. Maybe I am doing it the wrong way.

  In  Section Of LabVIEW in the MATLAB® environment , I do not understand what is meant by ""write into the file of worksheet VI on the programming "' e/s filespalette. '"

  Can someone explain to me how to do this? I'm just trying to read any exmple saved in LabVIEW in Matlab. If anyone can give another example, which would also help a lot.

  Thanking you.

  INDI

  INDI,

  I think that your problem may be to understand the terminology.  .Vi files are LabVIEW programs, not data. Those who cannot be "read" by MATLAB.

  Writing in the worksheet File.vi is a VI that comes with LV on the palette file. It can be used in your program to write data to a file text delimited by tabs. These files can be read by MATLAB.

  What it the way which operate you: generate the data you want to save in your LabVIEW VI in the form of a table of numbers. Wire of this array of numbers to Scripture in the File.vi worksheet at the time where you want to save the data. If you do not connect a path at the entrance to the path of the file, a dialog box appears asking where to save the data.

  Lynn

• How to select the path of data through labview

  Hello gurus...
  I'm new user in labview. I want to read and write to the database via labivew. I have
  read and write the program. Now, I want to choose the way of storage of data through labview.
  I tried different ways, but I couldn't.
  First of all read and write the program I did via the UDL file path. Now, I want to choose ".mdb" file path directly.

  I do not know how...
  So if you know please help me...
  Thanks

  Concerning
  Joel M
  India

  Rather than trying to create an Access database, I have simply included a blank database with the installation.  Open, build the tables as required (as your example shows), and then copy (using the copy of the palette of Advanced File i/o) whenever you need it.  Your program will need to know where it is, therefore, store the connection information in a configuration file (as already mentioned) is a possibility.

  Here's how to use a connection string to open a database:

  

• Installation of the LabVIEW 8.5.1 runtime error: "this application has requested execution to terminate in an unusual way.

  Hello

  a colleague in India can not install runtime LabVIEW 8.5.1 on Windows XP. On try installing, an error box appears, which says:

  (window title)

  Microsoft Visual C++ Runtime library:

  (text of message box)

  Runtime error!

  Program: C:\National Instruments Downloads\LabVIEW 8.5.1\Runtime Engine\setup.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  http://img529.imageshack.us/my.php?image=runtimeerrorvt7.jpg

  I found no relevant clues for that in the forums of NOR. A Google search led me to http://support.microsoft.com/kb/884538/en-us, offering a fix for the problem. Unfortunately, the installation of this hotfix does not solve the problem.

  You know this problem and you have any ideas, how can the problem be solved?

  Thanks in advance.

  Best regards

  Manual

  Hello

  Thanks for your replies. It seems that our colleague-IT solves the problem. Installing Windows XP for the India via the network of the company was defective.

  Best regards

  Manuel Haderle

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• I bought my Iphone7 United States, is it guaranteed in India?

  In fact I bought my phone at home I want to ask that is it is guaranteed in India

  No, the iPhone must be returned to the United States for repair or replacement.

• Why not my iphone 7 purchased in the work of United States in India?

  I bought an iphone 7 in the USA on a trip to Best Buy.

  I bought a T-Mobile Sim and what I had to go with some carriers.

  When I brought this back to the India, the phone does not work with my Indian SIM card.

  It says that I have to use a specific door-SIM.

  When I check with T - Mobile by providing my IMEI, they said my device was a 'device T - Mobile no'

  Here's the mail:

  "Thank you for taking the time to contact T-Mobile. We received your request to release SIM. Unfortunately, we are unable to process your request at this time because we are only able to provide the unlock codes for T-Mobile USA phones. Please check your request for unlocking for this equipment directly to the carrier that the handset was purchased from. "

  But the handset was bought from T-Mobile carrier.

  How can I unlock my phone in these circumstances?

  Thank you.

  PS: I checked and the bandwiths are fine

  The website check out BestBuy - they do not sell the iPhone for T-Mobile 7.  All their iPhone models 7 are sold carrier locked on Sprint, Verizon or AT & T.  It doesn't matter which SIM was purchased at the time - if you bought an iPhone 7 or 7plus BestBuy it is carrier locked (one of AT & T, Sprint or Verizon).  You've been misinformed about what you buy or you misunderstood what you said the people of BestBuy.

  BestBuy does not sell the iPhone Unlocked 7 or 7 more.  Nor do they sell these devices for T-Mobile.  If your phone is locked to AT & T, Sprint or Verizon and they will not unlock it unless you are or have been a customer of theirs with an account in good standing, and after meeting the minimum period of service to qualify for unlocking.

  Return it to best buy, if you can.  T-Mobile is you tell the simple truth.  There is nothing they can do for you, that this device is not locked to their network.

  Sorry, but this is a perfect example of why it's a bad idea to buy your iPhone abroad.  In particular, without being absolutely sure what you purchase and what limits the device can be fitted.

• iphone4s used 4years can use in India, my daughter gave me

  my girl from canada gave apple iphone 4s, sheused more than 5Yrs.HOW to start in INDIA,

  If the iPhone is locked to a provider Canadian wireless, your daughter

  will be working with this wireless provider to get the iPhone unlocked

  until you can use it in India.

  Then she wants to do the following steps, slowly and in order,

  leave each comprehensive step before trying the next one.before sell/give away iDevice: https://support.apple.com/en-us/HT201351

• Does 7 Iphone bought from USA to India?

  Hey I'm from the India. I want to know that if I buy the Iphone 7 of the United States, while it will be unlocked and it'll work in India or not?... and if yes, then which carrier would be the best for the Iphone 7 work easily in India? Thank you

  While you can buy a device to the United States, it may not work with all bands of LTE in India, and the guarantee for the iPhone is good in the country of purchase. If you have a problem with the device, you must go to the United States for the service.

• If I buy iphone from apple store in usa, going to work in India

  Hello

  I just want to know my Bill come to the United States if they buy iphone 7 from there, it will work in India.

  Yes. I work in India, if you don't buy locked carrier device. Unfortunately, warranty of the iPhone is not international and is not valid in India.

• I want to buy ipad in the United States to use in India.   will be guaranteed will be honoured in India for ipad bought in the usa

  If I buy the air ipad 2 in the United States on thanks giving day and if I use the ipad in India will get a guarantee assistance in India.

  also is there any problems if I use, ipad, made in the USA, in India

  There should be no problem, as long as you use a single wireless device. If you want a connection wi - fi and cellular iPad, the guarantee would be specific to the United States. A wi - fi connection must have the guarantee honoured in India. This question may be better providers allowed in India.

• Buy iPhone7 of the United States will work in India

  Hello!!!

  My brother brings iPhone 7 (factory unlock) for me as a gift of Deepawali (Festival). India it will work correctly.

  Rgds,

  Punishes

  Yes, it will work, if she has unblocked it himself if not you will have to unlock here. Apple will release sim free version after a few days, if he buys ask him to get it.

• Cannot change the number of laptop Apple ID because I moved from the India

  I can't change the number of mobile for notifications in my Apple/iCloud account, it shows my old Indian number but I moved from the India and now Iam in Tanzania. He asked security questions that I don't even remember...

  I can not yet implemented iCloud keychain...

  Need help, he cannot set up on my Mac, the iPhone or iPad

  You can change preferences/iCloud/Keychain/options of the system?

• How much would it cost to repair iphone screen 6 in India?

  Hi everyone, in fact my 6 Iphone screen does not work correctly if I want to change the screen so I want to know how much it would cost me if want to replace the screen on the apple store.

  Check the Apple.com website in your country. The United States is support.apple.com that lists the repair costs.

  In the United States, it is $129 plus tax (without AppleCare +) or $29 (with AppleCare +). More than likely the price will vary in your country.

  Here is a link to the India English website: https://support.apple.com/en-in/iphone/repair/service