LabVIEW crash upon registration of LV2012 to LV2011 with VI express and reopen in LV2012

Similar Questions

• [BUG] LabVIEW crashes when replacing a control of waveform with a digital table

  Steps to reproduce:

  1. Started with LabVIEW
  2. Create a new VI
  3. Please control waveform on the front panel
  4. Right-click on the control of waveform and select replace-> Silver-> table, matrix & Cluster-> table - Numeric (Silver)
  5. See LabVIEW crash with error internal 0xC9381CDA in datamgr.cpp

  Tested on LabVIEW, 13.0.1f5 (32 bit) and 14.0f1 (32 bit), Windows 8.1 x 64 LabVIEW.

  Hi all

  The CAR initially submitted DFGray has been corrected in LabVIEW 2015! You can find a link to download here.

• LabVIEW crash at startup

  splash screen appears briefly, then labview crashes.  I tried a repair using the CD, but the problem persists. NI PXI-8110-dual-boot, I have windows and LV2011 on C:\ and real-time OS on D:\ I have recently been RT by changing the settings of the BIOS start-up, today I changed the BIOS to start windows, but now LabVIEW is broken.  lvlog.txt copied below.  What would you recommend I try next?  I'm guessing that my use of the RT operating system has changed something.

  ####
  #Date: December 23, 2011 10:46:52
  #OSName: Windows Vista (TM) business
  #OSVers: 6.0
  #OSBuild: 6000
  #AppName: LabVIEW
  #Version: 11.0 32-bit
  #AppKind: FDS
  #AppModDate: 22/06/2011 11:12 GMT
  Base address of #LabVIEW: 0x00400000

  10:46:55.541 23/12/2011
  Crash 0 x 0: Crash taken to DENY
  File Unknown (0): Crash: Crash captured by DENYING
  Minidump ID: 4d84c03d-143c-4705-8479-8fae2dedb5f9
  ExceptionCode: 0xC06D007E
  0x01AA0EC9 - LabVIEW + 0
  0x01AA1408 - LabVIEW + 0
  0x7C37FDB4 - MSVCR71 + 0
  0x76E59F8E - ntdll + 0
  0x00000000 - + 0

  Hello

  I'm not sure as to why using the partition of RT was to break LabVIEW in windows, unless you run a code that made changes to the dependent LV of the files on the other partition. You accessed partition C by the OTR?

  You mentioned you tried a repair, have you tried a complete reinstall of LabVIEW in windows?

  I suggest that you have done a complete reinstallation of any software of NOR. I have attached the instructions and a copy of "msiBlast" you can do a nice clean reinstall.

  Let me know how you get it, or if you have already tried to uninstall/reinstall.

  Kind regards

• LabVIEW crashes when opening the project

  Hey guys,.

  I'm running into an interesting issue where LabVIEW crashes when you open a project. This is the second time I encountered this problem on the same project. To get around it the first time, I simply deleted and remade my project, but since it happened again, I need to find a way to debug it. The symptom is that LabVIEW will crash at the opening of the project (sometimes I can see the screen "loading the vi") with no indication that the accident occurred. It does not even launch the reporter of the error, the process just dies. Anyone know how I can go about debugging it?

  xkenneth86,

  What version of LabVIEW? Have you had previous versions of LabVIEW on your computer? You can attach a screenshot of the accident?

• Using the table as a MATLAB script for entry into a Subvi - labview crashes

  Hello

  I have problems in creating a Subvi, which includes a matlab file that has a table as input.

  I created a VI, who runs a simple matlab script, with a table as an input and a table as output. It worked well, until I assigned the terminals in order to to use as a Subvi.

  After that the terminals have been assigned, labview crashes instantly when you run the file.

  I also created a VI to test the Subvi, but I couldn't make it work at all, labview always crashed...

  Does anyone know a solution to my problem? They only thing I can think is to not use it as a Subvi, but then my master file will get huge as all the matlab code would be in there...

  attached are two files, so that you can better understand my problem. (test_... is the main file)

  any help will be greatly appreciated!

  -Jarno

  Edit: I'm using labview in 2013 with windows 7 and matlab 2014

  Hey, Jarno,.

  This is indeed a bug, unfortunately. Currently followed by using identification number of the 446431 cause. The question arise when moving from an array of doubles in the Script node. The only 'solution' at the present time is to use an array of singles instead. We are currently looking to identify a fix.

• binary for roll - crashing LV2009 registration VI

  I'm working on software that runs on a CRIO system.

  I have blocked constant (LV2009 all installed updates)

  When I try to add the function binary_to_nominal.vi in the examples

  in order to operate analog output of the FPGA.

  More specifically, when I place (not always connected) inside a loop to run on a table for

  data (binary, calibration and output data tables) I can always save the file.

  However, when I connect the output of this function in the index-tunnel and the

  tunnel of the index is connected to a table of index function, Labview crashed at the time

  I'm trying to save my work, but only when you save the file (which contains no error).

  Everyone had tzhis problem and knows a solution?

  OLAF

  Long time ago now, but I only now time to work on this project. The second tunnel, you mentioned was intentional as close to what I wanted before the crash appears.

  I might actually solve the problem now in re - compile the FPGA of the project part. Maybe this has not happened with the recent version of Labview with which I worked. So I guess that the problem was the bitecode FPGA. Now I could remove Dees second tunnel and connect the two variables as I wanted and save without accident.

• can not find size_t during import a dll and calling a labview crash function

  Hello, experts

  I need to use FingerLakeInstrument DLL (see attachment) within Labview for talking to a CCD camera. It is built from microsoft visual studio C++

  I unzip FLI dll in my D:\proj\...\linfli-32 and import the dll from there. created a c:\FLIDBG.txt FLI dll must write the debug message on it if are called the FLISetDebugLevel() or others.

  During the import of the dll, the first thing I got is (IE size_t) could not be found. I installed the free version of microsoft visual studio C++

  but can not find 'typedef unsigned int size_t;

  in the end, I just added

  typedef unsigned int size_t;

  in the libfli.h. Having done this, I am able to import all the functions in Labview and have a library of user called libfli.

  However, as soon as I start to call a simple function in a test.vi, as FLIGetLibVersion (char * worm, size_t len), which consists of nothing else the library, the labview crash.

  I created a simple C test.exe who calls a lot of functions with no problems

  any suggstion?

  concerning

  Xiaofeng

  You don't have not shown us how the LabVIEW code looks like. The size_t setting refers to the length of the buffer, in that you spend. In this case you pass a string. So, presumably, you created a buffer zone in LabVIEW to a string of sufficient size, and set the parameter "len" to the length of this string. You also have to make sure you use the correct calling convention?

• LabVIEW crash when recording

  Hi Forum

  When you try to save an attachment in 8.6 (the file is created in 7.1) LabVIEW crashes with an error from Windows saying that the system has encountered a problem and needs to close.

  All the SubVIs register without problems and I do not see that should cause this specific VI to cause trouble.

  I searched the forum and tried various things mentioned in other threads on this problem, but none of them seem to help on my VI.

  I hope someone has a good suggestion as to what I can do.

  B.R.

  Martin

  The problem seems to be with the typedefs. Specifically, it seems that it is the ring of text. Disconnect the typedefs of 7.1 and allows him to be opened in a newer version. Joined 8.2

• Why Labview crash when I try to use a joystick?

  I'm reading a Logic3 USB gamepad gamepad in Labview.

  Whenever I try to run any of the VI in ' Functions/connectivity/Input device' (IE access HID as keyboard/mouse/joystick through direct x) then Labview either crashes or I get the error message:

  -2000000008

  ERR_INVALIDDEVICEINDEX
  Please check if the device is properly connected. Please make sure the deviceIndex passed to initDevice.vi is correct.

  I have a new windows 7 (64-bit) PC with x 11 direct runs Labview 2009 and until recently, I was running Labview 8.6 on my old windows xp 32-bit pc and these VI has worked well.

  I know that x 11 direct sees the connected joystick I checked via the command run "dxdiag".

  Please help - thanks

  You cannot access a DLL 64 bit from a 32-bit process, and vice versa. Actually, in the other direction, it is possible via a workaround solution that involves communication interprocessue, but this is an advanced topic.

  Remember that you can install LabVIEW 64 bits for your specific version of LabVIEW. The license allows you to run the 64-bit or 32-bit. LabVIEW 2009 64-bit was not on the DVD, but you can download it from the site of NOR.

• LabVIEW crash when calling matlab script?

  My version of labview 8.6, Matlab is 7.1. In the beginning, I always get error 1047 when calling matlabscript, then I downloaded recommended matscript.dll (7.1.0.2) and replace the original one (8,6) with this one. 1047 error does not happen. And the matlabscript code can be executed. However the labview crashes after that Matlab is called.

  In fact my matlab file works well. At the end of the matlab code, data must be included on the photo. And it is. But after the image is shown, my labview breaks down, and when I reload the labview, it only invites me 'the last time you run labview, it is not stopped normally. The following files are automatically saved and are available for recovery.

  I used same monitor recommended treatment. But I can't find any reason. I've removed the scriptnode output, it does the same thing.

  anyone has a suggestion. I really appreciate your help.

  Jessie

  I would say the matscript DLL that you copied on the removal and run a repair on the LabVIEW installation to see if that replaces the missing files.

• How can I return to 6.3 4.0 I have never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• How to sit interface with matlab 2010A and labview 2010

  I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
  photos of errors are attached.

  natasftw wrote:

  http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
  While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand.  In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."

  The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426

  The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.

  Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.

  Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.

  -BTC

• is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  Hello everyone

  is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.

  With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.

  Here is a code snippet to open a monochromatic image

  

• Why are there people tecsavy call me to get money for my microsoft programs I already bought with my computers and they crashed my good computer

  Why are there people tecsavy call me to get money for my microsoft programs I already have bought with my computers and they crashed my good computer, I am a stay home Grandma take care my 3 grandchildren, they wanted 300. for my computer with windows vista and now they want 190. for this computer, why microsoft would let people do such things

  s7cwa7

  Hi Julie,.

  Microsoft has none of the unsolicited telephone calls to help you fix your computer. You can consult the following documentation to learn more about the same.

  Avoid phone scams | A cybercriminal Tech Support Scam | Security threats

  Fraudulent emails and credit scam advice cards | Microsoft Security

• I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said that there is no i

  I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)