LabVIEW cut values after 3 decimals

Similar Questions

• Speakers cut out after 1 or 2 minutes on my Satellite L750

  The internal speakers on my Satellite L750 - 16Z (PSK1WE) cut off after 1 or 2 minutes when playing any track video or music. The headphones work fine. The sound can be restored by plug it and unplug the headphones. The speakers work again with the new application, or after a long pause, then they cut. It happened that the computer is new, only after about 18 months.

  I've seen dozens of posts on forums US of people who have this problem. I am running Windows 7 64 bit, but I see that people have the same problem with Windows 8. I have tried most of the proposed solutions:

  Reinstall the audio driver (in my case Conexant Smart Audio HD version 8.51.1.0);
  Closure, by removing the battery, etc.;
  Alternatively clicking on playback and recording in the settings dialog of the sound;

  and * none of them recherche.* I'm not willing to do a system restore and the risk of losing my data. With the help of external speakers is not a solution for people who travel (would not have bought a laptop if I had to carry a suitcase full of accessories to make it work).

  I should really grateful for the help on this

  {quote} The sound can be restored by plug it and unplug the headphones. {quote}
  I got exactly the same problem with my laptop. But my laptop supports the Realtek HD audio driver.
  However, the same problem occurred. By speakers disappeared but the helmet worked.

  I m sure its software related issue. From my point of view of a few you would be able to resolve this problem by installing the new system, but it would be a very drastic just to get rid of this annoying problem procedure. I was able to solve this suite of this workaround.

  In Device Manager, expand the Audio category video game controllers
  Look here for the Audio device high definition and delete

  Expand System devices and look for high definition Audio Controller
  Mark and remove it.
  Also you could uninstall the audio driver Conexant. But in my case, it was not necessary.

  After that, restart the laptop and wait for that deleted devices has been recognized and installed again...

  Good luck

• Satellite Pro A60 cuts off after 3 minutes

  Hello

  work in IT Support generates many puzzles, but I currently have a Satellite Pro A60 which cuts off after 3 minutes.
  I have deleted the main CPU fan and have noticed that the VGA Chip Set fan fails.

  It is not at all which makes me think that it is completely broken or there is a problem with the motherboard.
  Who is more likely and if not card mother, can I buy a VGA heatsink thermal elemnet / separate fan and if so what is the part number and ball park cost?

  Matthew

  Hello

  As you already suggested this strange faucet portable bottom may be related to high temperature and to overheating.
  You are right; the malfunction of the fan could be a reason to close automatically and sometimes down.

  > can I buy a VGA heatsink thermal elemnet / separate fan

  Usually, the cooling modules are pieces separately and can be replaced.
  But notebooks disassemble and replacement of cooling modules is not easy and a little more difficult for someone who has no experience and never changed something like that. It s just too risky, because this person may damage the motherboard very easily.

  So, it's probably best to contact the technician of specifications for these s replacements!
  The ASP can command the support of the head of Toshiba warehouse cooling modules and compatible and could replace it.

  Best wishes & congratulations buddy ;)

• Re: Satellite L750 - the speakers cut out after a few minutes

  My laptop speakers cut out after a few minutes, if I play music from iTunes, a DVD or talking on Skype - ideas please someone?

  And then?
  What should you do to get speakers still work? Laptop restart maybe?

  Are you using the original pre-installed OS that you got with your laptop?
  Since when did you notice this behavior?
  The same happens when you use headphones?

• Why the labwindows/cvi Installer runs whenever I try to start labview 7.1, after I installed N!-series?

  Why the labwindows/cvi Installer runs whenever I try to start labview 7.1, after I installed N!-series?  The installation program runs 3 times now and asks me to restart every time.  Then I reboot and it happens all over again when I try to start labview 7.1, unless I select Cancel 3 times in a row then labview starts.

  Thank you once again.  I am running.

  Barry-AIC

• Variable is shared deployed on target RT retains its value after restart?

  Shared, deployed on a real-time target variables are stored in the nonvolatile memory or RAM? It will hold its value after reset or power/power on? I tested and it seems retains its value, but I have found no documentation on this subject of NEITHER.

  Kind regards

  Tom

  Hello

  There are several components involved in the way the variables are stored on a target, but a part of which is in a non-volatile memory. Shared variables local to the target RT will not retain their value. Any reading of the data of the target host will receive the last value of the target before restarting given that the host is not at the same time re-started. The reason why it is that there are 2 shared engine variables at work; one for the host and one for the target. Since only the target has been restarted, the variable engine shared on the host retains its last value while the engine on the target will be set to 0, false them or an empty string. Here is an example of a community that "Monitor" [s] to the State of emptiness in RT FIFO active shared Variable'.

  Best,

• laptop keeps cutting off after 1 hour. new battery installed

  laptop keeps cutting off after 1 hour.  new battery installed why this phenomenon occur?

  Have you checked your Power Options settings?

  The following article is maybe worth a visit:

  Adjust Windows XP Power Options
  http://www.lancelhoff.com/adjust-Windows-XP-power-options/

  A Google search for power management / Power Options
  will provide more information.

• values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  Hi all

  I need the values according to below 2logics in a single select query using instring and substring

  1 values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  2 values based on the following logic 'values after the first values of two '_' and before last'-'values '.

  EXM:

  Entry: ABCD_EFGH_IJKLM - NOPQ_XYZ output: IJKLM - NOPQ

  Entry:. ABCD_EFGH_IJKLM - NOPQ output:IJKLM

  Thank you.

  Check the following

  WITH DATA1 AS

  (SELECT "ABCD_EFGH_IJKLM - NOPQ_XYZ" double val)

  UNION ALL

  SELECT 'ABCD_EFGH_IJKLM - NOPQ' double val

  )

  SELECT SUBSTR (VAL, INSTR(VAL,'_',1,2) + 1, DECODE (BIGGER (INSTR (VAL, '_',-1, 1), INSTR(VAL,'-',-1,1)), INSTR (VAL,'-', - 1, 1), LENGTH (VAL) + 1, INSTR (VAL, '_',-1, 1))-(INSTR (VAL, '_', 1, 2) + 1))

  OF DATA1;

  Concerning

  Salim

• Process of calculation to calculate the value after submit after all validations

  Hello

  Please help with a possible approach or suggestions for the calculation process.

  I have a calculation process after submit I want to calculate its value after that all validations are handled. Because this process of calculating trim is off of the first part of the input string of the user for the P3_USES element. Thus, for example consider; the user selects a value for P3_USES (point list manager) to be "TAC"... BCA... BCA... BCA... 0.CA BC... "CA IT BC. So my calculation process just stripes off the coast of the first portion of the string and computes the value will be "BCA"... BCA... BCA... 0.CA BC... "CA IT BC. It works fine when all postings on the page are placed without cooking.

  The problem occurs, then the validation fails on the form. Once the validation fails, the calculation process; already calculates the value and the P3_USES value form element is set to "BCA"... BCA... BCA... 0.CA BC... "CA IT BC. So, here the user solves the problem of validation and sends it again the form, but at this point the value is calculated again but this time that my string is "BCA"... BCA... BCA... 0.CA BC... CA IT BC"which is not correct, because my initial user string entry was"TAC"... BCA... BCA... BCA... 0.CA BC... "CA IT BC.

  So my question is how they treat the value of my calculation after all validations. While I can keep the original value of the P3_USES element. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database.

  Thank you

  Rambeau

  Hello

  Combine code of calculation and validation?

  Perform the calculations in the process?

  Use another element to contain the value 'real '?

  Kind regards

  Jari

• clear values after saving record

  Hi How can I clear value after that I have save record so that the user can enter another information, for example, I enter user details when I click Save I have what it takes to clear these values in inputtext

  That's how record, am in jdeveloper 11.1.1.6.0

  am still not able to cretate new record after I've created OneLa create data still remain in inputtext id does not, his works now when I use this ADFUtil.invokeEL ("#{bindings.") CreateInsert.execute}");

• Extract the value after the period

  Hello
  
  I am trying to extract the value from each period.
  
  I have the table data is stored in this mode 172.168.15.10, which is an IP address,.
  
  
  My requirement is I need to first value in a query with must return 172
  If I need the value after the second period, it should return 168
  
  
  Please suggest me how to write a SQL for the above requirement and oracle 11i Enterprise edition as the database.
  
  
  Thank you
  Sudhir

  with regexp

  select
    regexp_substr('172.168.15.10', '\d+', 1, :pos) s
  from dual
  

  without regexp

  select
    substr(s
          , instr(s, '.', 1, :pos) +1
          , instr(s, '.', 1, :pos + 1) - instr(s, '.', 1, :pos) -1
    ) s
  from (select '.'||'172.168.15.10'||'.'
   s  from dual)
  

  Edited by: chris227 the 01.10.2012 01:23

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• can you install final cut pro after you bought an iMac

  You can install Final Cut Pro X on a 21.5 iMac after that you bought? I currently have iMovie, but I'm not ready to upgrade to Final Cut Pro X. I don't want to have to buy a new computer just for Final Cut Pro X.

  Yes, you can install any application you want.

• creation of software version track Labview so works after 30 days

  I created the program using version trail OR labview software and the hardware I use is material NI Compact RIO. I build and created EXE file in the material Compact RIO now its fine work if after 30 days trail version is more to know if it works without any problem, because the software I use is a trail version.

  Interesting question.  I used executables compiled wide enough and even if it's not a direct response to your question, while I start writing the program on my computer with a license full and later compile it on this one, I often installed a copy of the trial on the computer on which the executable would be possibly used with what I could change and test the code out without having to hike in both sense as well to troubleshoot my programs and never later, I had a problem, and several times the program last record on the trial version until I copied it on my PC with the license to do the actual compilation of it.  This says I imagine there is a way they could include the expiration in the executable.  Generally for all the demos, there is a help file or the readme that explains the exact limits of the demo version.  I wouldn't really recommend based on what it is because you will not be able to go back and fix or change it later without a full version.

• LabVIEW stopped working after windows update

  Windows XP 32 bit with Labview 2012 Service Pack 1 - Windows Auto-implementation to date 11 may 2013.  After update, Labview crashes at startup, nothing suits him.  I tried to restart and all the usual nonsense.  You can open the screw, but then the CPU enters a State of usage of 50% or 100% (which seems to be random) and Labview hangs just w / of the hourglass icon and never answers.  I can open NI MAX and querry various instruments, but crashes just Labview itself (start or any what VI).

  I need fix as soon as POSSIBLE, very tight edge scientist, cannot wait TO open their doors Monday morning.

  Help, please!