LabVIEW dev. window broken? (2012)

Similar Questions

• Where can I download LabVIEW NI Developer Suite 2012 64-bit?

  We have for LabVIEW NI Developer Suite 2012 32-bit installation DVD. On the support page for LabVIEW 64-bit vs 32-bit FAQ, it says to download the 64-bit version in the "Windows Setup can be downloaded via the drivers and updates: LabVIEW 64-bit section of our Web site", but the Developer Suite for 2012 64 bit is not listed.

  Please notify.

  Yes, you need SSP to make from this link. Really should have kept active ssp. Try the ftp site - http://download.ni.com/evaluation/labview/ekit/other/downloader/

• WinRAR command line tools do not check an executable Windows Server 2012

  Hi all

  I have developed a VI in LabVIEW 8.6 using WinRAR command line tools (passed in the Exec.vi system) to archive data that takes place on 5 different computers on a network and stores on a server .rar files.  Executable file of the VI works perfectly on my computer (WinXP) development.  The data from each of the 5 machines are archived and .rar files are stored on the server.  However, when I move the executable on the server where the .rar files will be stored and run the executable file, the command window flashes on the screen as if WinRAR commands are running, but no data is archived on the server.  No errors are passed out of the Exec.vi of the system.  The server's operating system is Windows Server 2012 and I placed the Rar and UnRAR .exe in the folder system32 on the server.  The server firewall is disabled, and he is able to explore at the location of the data to arhived.  The server is logged in as a domain administrator account.

  Here is an example of one of the commands in command line that I spend in the Exec.vi system:

  cmd /c rar a - m5 \\selsacn11\viscom\selsvis01\15\07\20.rar \\selsvis01\Rep0\Archiv\15\07\20

  When I manually type this command in the command line on the server, the data is stored properly.  The problem occurs when I run the executable on the server.

  I tried to work around the problem by creating a batch of files containing the command above, then using the Exec.vi system to call this batch file.  Yet once, when I manually run the batch file, it works correctly, but when Exec.vi system in a LabVIEW executable file runs the command on the server file, I get the same result as described above - no data are archived on the server.  This batch file works on my development computer and on my laptop to the company.

  My only thought is that there is a problem with the access rights.  So far, the executable works fine on an older server (Windows Server 2003), the development computer (Win XP) and my laptop (Win7) company, but the executable archive not the data on the Server 2012 server or on another computer running WIndows 7.  I have all these machines connected under the same domain administrator account, but COMPUTER networks are certainly above my head, so I wanted to check here if anyone has seen this problem with WinRAR or the Exec.vi system.

  Thanks for any info!

  Success!

  Darin, I took your suggestions and after some more fighting with him, I have an error Code 2 on the Exec.vi system.  This led me in search of the forums where I fell on the following:

  http://forums.NI.com/T5/LabVIEW/problem-using-quot-MSG-quot-command-with-quot-system-exec-VI/m-p/153...

  Of course, all the machines that had been able to run the executable file are 32-bit.  All the machines that could not run the executable are a 64 bit system.  I placed the Rar.exe in the C:\Windows\SysWOW64 folder on the server and it works exactly as expected today.

  I fought with this for weeks, so I'm a little disappointed that it was something so simple, but I'm very happy to have finally work!

  Thank you all very much for the help!

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• Satellite C660 - 1 DG-drivers of Windows Server 2012

  I started Windows Server 2012 (for development purposes).

  Now... where can I find the drivers?

  * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
  * sound driver * -.

  What drivers Miss do you?

  Fact is that Toshiba offers all drivers for supported operating systems.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• LabVIEW 6.1 and 2012 at the same computer problem

  Hello world.

  I've been using Labview 6.1 for a while and it worked fine for me.

  I recently installed Labview 2012 on the same computer and looks like the serial port of functions do not work properly. Whenever I try to open an example of VISA communication, labview freezes.

  I guess it's because even though I can install two versions of labview in the same computer, the drivers can be installed once correct?

  But I thought that labview 6.1 and 2012 may share the same VISA driver.

  Is there a way I can resolve this problem with versions of labview works correctly?

  Thanks in advanc.

  The LabVIEW and VISA compatibility chart is here. As you can see, there is no version of NI-VISA which is compatible with the two 2012 and your old 6.1. Indeed, the graphic poster not only any version of older than 7.1.1 LabvIEW.

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Active directory Migration from Windows Server 2003 to Windows server 2012

  Hi all

  Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

  Help please give me an advice.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• R2 Windows Server 2012

  Hello

  I use windows server 2012 r2 and have some difficulty at the start of services such as, AenService, gupdte, the windows module installer does not start, I tried to start it manuely but the result was the same, please give me the solution

  Concerning

  Jean baby

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Windows Server 2012

  I was wondering if anyone can help me with setting up Windows Server 2012, I have a server need active directory to be installed, so appreciate help with that.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.