LabVIEW executable becomes insensitive, Windows reports the lack of resources in trying to perform tasks of the Explorer

Similar Questions

• window of the Explorer WIN8 cutting.

  Blue bar at the top is white and the keyboard is not responding. As when you switch from one window to another, and it becomes "active." This only happens for a few seconds and at random times but it is annoying because it interferes with typing in particular. It does not matter if it is Windows Explorer or internet explore. Any ideas?

  Laptop Dell Inspiron 17R

  Hi,

  Glad to know that the problem is solved. Let us know if face you any problems with Windows in the future.

• How can I change the images in the window of the Explorer of Windows 7?

  I use Windows Vista for the past years, and when you look at individual photos in windows Explorer, there is the sidebar that allows you to tag photos and also to make several minor changes (red eye, saturation, contrast, etc.).  Now I'm trying to do the same thing on Windows 7 and I do not see this option.  MS to get rid of him to 7?

  Yes, windows photo viewer has been replaced.

  There is no more editing via windows Explorer,

  You can add tags and captions in windows Explorer, but it isn't in the Viewer

  You can add text above information using the Info pane on the bottom of the weekend.

  Click on organize upper-left.

  Point to page setup and click details pane.

  Other changes must be made in a program full spectator not in the small display.

  Use windows essentials 2012 / picasa from Google...

  http://Picasa.Google.com/

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home

• Processor 1 MHz Windows report?

  I ran a scan of my PC system requirement Labs "Can You Run It", which uses Java to collect your machine system information and compare it to the configuration requirements for a selected game site.  I was surprised to see that my CPU has come as 1 MHz (Yes, 1 megahertz, not 1 gigahertz), and therefore my machine is deemed unable to run the program.  I have a core I7 3930 K, and in the past it did appear correctly on the system requirement Labs Web site.

  Then I noticed that if I go to control panel and open 'System', I see in the summary under processor: "Intel (r) Core i7 - 3930 K CPU @ 3.2 GHz 1 MHz", just like that.

  So, apparently, Windows doesn't know I have a 3930K, it considers just its running at 1 MHz for a reason any.  I know that is not the case, and check for an application like CPU - Z shows good speed.  So this isn't really a problem, BUT it's the kind of thing that will bother me.

  I know Intel Enhanced SpeedStep technology will clock up to inactive to lower the heat and save power cores.  The thing is, I have disabled who.  And besides, I know that this is not up to 1 MHz clock.

  Any help with this?  Thanks in advance!

  I found the answer in my case.

  If I disable the Turbo Mode for the CPU in the BIOS, the system Windows 7 summary indicates the frequency of the correct base processor 3.2 GHz.

  When I re-activated the Turbo Mode, Windows is returned to showing the clock speed of my CPU like "1 MHz.

  I know that I always had in the past in Turbo Mode, and Windows reported the correct base clock then.  So I'm not sure what has changed to make it work like that now.

  I think he might have some 1 MHz processors in the 1970s!  Don't know why get Windows that's so wrong...

  Thank you

• Windows 7: "the action cannot be performed because the file or folder it is open in another program.

  I get this message literally 100 times per day oscillating folders directories using windows 7.

  Make sure that I don't have that ONE window of the Explorer open but it's not bad for windows 7, I still get the error of 50% of the time. Sometimes if I close the browser, reopen it, then I can move the file.

  I'm so sick and tired of windows 7 Home premium and will now go and buy windows xp. Thank you MS for losing my life and money.

  Elsewhere on this forum there are advice to get applications third-party or restart the computer in safe mode - you are kidding!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Why Windows Explorer crash if I shift-delete a directory that has been created as part of the 'libraries' of in the Exporer in the pane hierarchy of directory on the left side of the Explorer?

  I just discovered a very basic bug in Windows 7 file Explorer:

  Open the folder "libraries." Select any item under 'Libraries', for example 'Documents '. In the hierarchy of folders in the 'Documents' left right click and select 'New'-> 'folder '. Select the directory newly created in the hierarchy of folders (always in the left frame of the Explorer). Right-click in the right frame and select 'New'-> 'text Document '. Open the newly created document, enter text and save it. Now, again select the new folder in the hierarchy of folders in the left frame and type + . An error message appears stating something like "C:\Users\Public\Documents\FOO refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »

  When you click OK in the window of the Explorer will crash and respan itself after a short period of time.

   
  What is the full error message?
  What changes were made before the grant took place?
  How long you have been facing this problem?
   
  You can use the following methods that can help you solve your problem:
  Method 1: try to make the SFC scan on the computer.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  Method 2: If above method does not work, try to perform the clean boot and check for the issue:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Method 3: If that does not work, create a new user account and verify. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 4: You can also use Event Viewer to search for information on the problem.

  Reference:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can check for more information about this at the time where it appeared and post this information here to help us narrow down where the focus.

• launch of the Explorer error lvproj

  Hello

  I use Vista SP1 32-bit 10 LV and it works OK for a month.

  I was doing some storage project / renaming etc but when I tried to restart using a window of the Explorer and double click on the .lvproj file I dialog "Windows cannot find ' c:\.  (my path) \test.lvproj' I'm still capable of launching the project properly form the start window.

  Now, I also get the same problem with a new project!

  Any ideas how LabVIEW works properly with the operating system again?

  Al

  The problem seems to have disappeared!

  Several reboots the computer seems to have fixed. I don't know if this makes it a problem Vista or LabVIEW?

• Preview pane of the Explorer crashes then work after you close the error message.

  Whenever I have use the preview pane in Windows Explorer to view the contents of, say, a file .reg, doc .txt or .ini file, it crashes with "Preview Handler replacement host has stopped working". I click on the option 'Close program', which is followed by an Application error: "Exception EAccessViolation in module ShellEh428.dll" etc. I which closes as well. Then the preview pane works without having to close and reopen the Explorer window. In fact, if I close and reopen, it happens all over again.

  It's not that big a disadvantage because the window of the Explorer himself plant actually, but it would be nice to know why this is happening and if it can be prevented.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• LabVIEW 2010 executable runs under windows xp, but not in windows 7

  Hi all.  Here's the situation.  We have Labview 2010 professional development on a computer running Windows XP.  I designed all my programs with this PC.  We have another PC which has Windows 7 with no Labview.  I'm trying to make the executable files and put them on the Windows 7 PC.  I have been here three executable files and move the Windows 7 PC.  One of the executables work correctly, the other two interrupt immediately.

  Executables that stop have temperature limits and the program is apparently seen a low temperature and so stop the program.  Yet, these same executables work fine on the PC under Windows XP.  What seems to be the case, is that the program is expelled before allowing himself read the temperatures.  I use the modules of the series C 9213 and 9211 with 9188 Chassis.   My programs are showing 0 for temperatures.  Well, it's certainly in the low temp limit, so the program stops.  However, she should not do this.  I know there is little delay with the playback of all thermcouples in 9213 and 9211 modules, but this was not a problem with Windows XP.  Even if the program starts from scratch on the XP PC, temperatures immediately appear, or appear after a second or two.  Yes, I've rarely seen a temp 0 on the XP PC, but the program doesn't stop; Give it a second or two and the time appear.  Why is it that happens in Windows 7?

  An executable that works has no measure of temperature.  It uses only 9481 modules and run the solenoids at a rate of about 0.2 seconds.  This executable works fine on both computers.

  So what - this on the modules of temperature reading that is causing a problem in Windows 7?

  Other installation data :

  -The XP PC has the updates Labview 2010 is compatible with

  -The PC Win 7 not the latest updates of Labview 2010 there are has compatibility problems.  National Instruments has given me the compatible components, and they has several levels down by the most recent (for example MAX vs MAX 5.6 v14.0)

  
  

• Labview 2010 8.1 Windows executables

  Greetings,

  My development computer is a Windows 8.1 with LabView 2010 Professional machine. I created a project and published an executable with success. Obviously this works on my development system.

  However, I have another machine Windows 8.1 (new installation, nothing about this). First, I installed the runtime Labview 2013 because (a) I thought that it would be compatible for older versions, and (b) it says it supports the Windows 8 operating system. Unfortunately when I tried to run the executable it gives me the following error:

  Could not locate the LabVIEW runtime engine.

  .. .requires a 2010 version (or compatible) Labview engine of execution. Contact the seller to [name of program] to correct this problem.

  Okay, so I uninstalled the runtime of 2013 and restarted. Then I installed 2010 thought that is what it takes.

  Gives me the exact same error as above.

  I saw similar problems of windows 8, but nothing I could find about it.

  What I am doing wrong?

  Thanks in advance.

  Why install the runtime 2013 when you have an application of 2010? You must also install the appropriate number of bits of the runtime.

  Why not simply create an installer?

• Is it possible to run an executable on a Windows Phone 8 Labview?

  If I create an executable of Labview, it will be possible to run it on a Windows 8 phone?

  No, as Mike has already said.

  The reason is that an executable of LabVIEW contains a binary code that is compiled for the x 86 architecture CPU, and access to the Win32 API. Windows Phone general works on the ARM or RISC processors and provided only a subset of Win32 very limited in the past. With the new Windows RT technology that he actually moved even further the Win32 compatibility as it is all architecture is based on .net technology.

  So even if you happen to get a processor Intel Atom based device Windows Phone that would be compatible x 86 it couldn't work, because a LabVIEW executable is an executable format portable Win32 is not a picture of .net bytecode.

• How to keep external list of the window to the foreground of the window of labview

  Hello

  I ran the .exe of my labview file using exce.vi. It wokrs too. but I have the problem with the dialogue window of file.if .exe, that I run the file .exe using the command line, it appears a dialogue window named for example 'START' if I press on Yes or no and then new dialog window appears and so on up to the finish. But the problem is the first dialogue window if poster in the foreground of my labview and other background (suppresed) .for then do further first I have downplayed my labview window.how could I keep showing this dialog window always in the foreground of my labview? Thank you.

  There are 2 ways to make a window ALWAYS in front of your panel:

  1. child window.  A child window is always in front of its parent window.

  2. upper window.  Windows in the foreground are always in front of normal windows.

• How to read the tag bluetooth data in labview 2015 running on Windows 10

  Hi all

  I have a Development Board Nordic semiconductor nr51. This card is programmed as a tag bluetooth which simply announces his address with 16 bits of data appended to the end.

  My laptop came with loan materials smart bluetooth. I installed an app interactor lighthouse to bluetooth on my laptop and the software is able to detect the tag as if shown on the image below.

  

  I wanted to write a LabVIEW program that will simply be careful bluetooth headlights and notify me in my computer every time a lighthouse with the specified address is detected. This mobile application below is provided by the manufactuerer of the Board of Directors and I wanted to develop a LabVIEW program something similar to what will read the given data and extract values.

  

  Somehow, all the sample applications provided data only shows how to read and write in a connected bletooth device but not analysis for tags. I also tried using the Bluetooth ' discover ' and it does not detect the bluetooth beacons.

  Could someone provide me with the necessary information or example program for detecting / reading of tags bluetooth in LabVIEW 2015 running on Windows 10?

  Do I need to install a third-party software to read data from bluetooth?

  Bluetooth in LabVIEW function nodes using the Winsock interface to access bluetooth resources. This works very well for Bluetooth 2.0 devices but not Bluetooth 4.0 devices WHEAT aka. Microsoft has created a completely different interface for these resources API as the model of overall service for WHEAT devices has radically changed.

  The API to use WHEAT devices is the API of the GATT (generic attribute profile) in Windows. There is supposedly a .net interface available that you can try to use (Windows.Devices.Bluetooth.GenericAttributeProfile). The WinAPI to lower level (https://msdn.microsoft.com/en-us/library/windows/hardware/hh450825(v=vs.85).aspx) is a C DLL API and does not lend at all to be called directly by the LabVIEW call library node, since some of the parameters of the function are quite complicated and you need to also access the SetupDI APIs to enumerate resources WHEAT and even harder to function parameters. In order to access this low-level API to write an intermediate DLL which results in low level API C a more acceptable API for LabVIEW.

  Another possible problem is that Windows don't at least in Windows 8 not allows devices to pair per program. Microsoft wanted to force developers in the use of the "inbox" experience, which means that all users must go through Microsoft provided service pairing, instead of each request for implementation of his own matching technique.

• My XP VM is enabled but the backround becomes black and and the internet comes up saying that I have to upgrade to windows 7. What to do.

  Hi all

  I have a virtual xp machine but the backround becomes black and and the internet comes up saying that I have to upgrade to windows 7. What to do.

  It is activated

  What should do

  Danbot 1

  Hi Danbot 1.

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope the helps of information.

• Error - in Windows XP the external monitor laptop becomes primary, but Explorer windows do not go to the main window.

  Original title: xp laptop lidswitch and extended mode.

  I have xp laptop. I connect external monitor and set it to the extended mode with my laptop LFP as main and external monitor as secondary. Configuration of the power for the closure of the cover option as long as "do nothing".  Open an Explorer window and drag extended display. Then close the cover. The external monitor becomes primary, but the Explorer windows do not go to the main window. They are always extend on even though the extended mode is it more. Is this a known problem with XP? Anyone know? Thanks for your help...

  Hi jt_pan,

  Try to share the desktop on two monitors.

  For more information, refer to this link: How to configure and use multiple monitors in Windows XP?

  Hope the helps of information.
  Please post back and we do know.