Error - in Windows XP the external monitor laptop becomes primary, but Explorer windows do not go to the main window.

Similar Questions

• Multiple monitors in the problem. External monitor display full desktop but no video in windows media player.

  I plugged a LCD TV to my laptop using a VGA cable. LCD TV display the full desktop.

  When I play a video in Windows Media Player video area is not displayed on the LCD screen, the rest all is shown.

  When I ran the player VLC video did not show, but when I changed the video option "overlay video output" i.e disabled this option, the video was shown on the LCD.

  But there is no option in WMP. How in WMP?

  What is the problem?

  Maryse Agarwal

  not a driver problem

  found the solution, I used both the computer laptop lcd and the external monitor

  When I went just outside, he played

  This is because the graphics card offers support for playback of the video when you play the video on the internal monitor

  Maryse Agarwal

• error message "cannot load the main class.

  I ran windows update yesterday and installed the recommended updates, restarted my laptop today the error message "Unable to load the main class" appears in a box and I couldn't do anything until I had closed this box, after the loading of firefox it displays a message not responding, then a bar indicating that plugin adobe did not start successfully so I clicked to reload page Then, I rebooted my laptop to see if this solves the problem, but the same error message appeared and firefox have responded in the same way, someone has an idea how I can fix this problem?  I run anti-virus software and malware from comodo and my OS is windows vista 32. I also downloaded an update for adobe flash yesterday but the problem has not produced until after I had done the updates of windows.  Thank you

  Hello Fiona,

  Thank you for your response.

  You are facing this problem might because of Java program on your computer.

  I suggest you perform the clean boot and check the status of the issue, which will help you identify the problem.

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section:How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Hope his helps.

• I have a HP9050 printer and continue to receive an error 59.10 on the main screen.

  I replaced the cartridge and the DC controller and the Assembly of the main engine, but it did not help.

  any ideas?

  Thank you!!

  Hi Jankster2,

  Generally, an 59.le xx error message is due to a temporary printing error occurred and requires you to restart the printer. The 59 error is related to a main engine failure. There are a few parts that you will need to look below.

  1. the cables on the DC controller PCA

  2. run the test of the Service and give me the code

  Service test verifies that the print engine is working properly. This test is very useful for

  isolate the printer problems. The test can be performed with this attached paper handling accessories,

  but it will not activate the engine accessories, switches or sensors.

  To perform a service test

  1 . turn off the printer.

  2 . make sure that the printer paper path is clear of all the media, and that the left front and right

  the doors are closed.

  3 . open the tray 2 and tray 3.

  4 . turn on the printer, and when the printer is ready, press to open the menus.

  5 . use or to scroll to the DEVICE you want to CONFIGURE, and then press.

  6 . use or to scroll to the DIAGNOSTICS, then press.

  7 . use or for SERVICE TEST highlight, and then press. The service test can take up to two

  minutes to complete. The TEST EXECUTION SERVICE message on the control panel.

  8 when the test is finished, the message SERVICE TEST PASSED appears on the Control Panel, or

  up to five sets of four-digit numbers are displayed on the control panel. If none of the anomalies have been identified,

  (0000 0000 0000 0000 0000) appears. If abnormalities have been identified, the four-digit codes

  appears in parentheses (0101 0111 0132 0000 0000). Note these codes

  3. it might be Assembly of registration or the main engine causing the blockage.

  If it does not always help I'd consider having a HP authorized service technician come out and diagnose the error.

• error then return to the main screen.

  Hi experts,

  When I navigate to the main screen I get below error. I click on the Cancel button and I see this error on the home page.

  < 2015 sep 17 20:34:45 CEST > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:64,085 during the inactive configured timeout of 5 seconds. >

  < Sep 17, 2015 20:36:20 CEST > < error > < javax.enterprise.resource.webcontainer.jsf.application > < BEA-000000 > < Error rendered view [/ FCRHome2]

  java.lang.IllegalStateException: component data flow is not found

  at oracle.adfinternal.view.faces.streaming.StreamingDataManager.submit(StreamingDataManager.java:519)

  at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer._encodeStreamingResponse(DocumentRenderer.java:4047)

  at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1707)

  at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1600)

  at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:525)

  Truncated. check the log file full stacktrace

  >

  Hi Preta M

  Found a bug with Custom UIShell Jdev 12 C

  Custom UIShell JDeveloper 12 c

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• error code 36000852 Msg: the main battery. A permanent failure has been detected. Can someone tell me if/how can I fix this please?

  I have a laptop Vostro/1510 Dell with windows XP.  The battery is not too old, but I get the above message.  I can do to fix it?

  Thank you much for the help

  On paper, a battery should normally, over the last decade.  Your laptop doesn't have a good track record.  I dump and get something else because these batteries are not cheap and if it lasts only a few years, would not pay for itself.

  Back up your data out of it and just get a new laptop.  Computers Dell laptops usually last about 5 or 7 years older, and he'll probably go next.

• I have Sony tablet and also have a Sony laptop. My laptop connect well but my tablet can not connect?

  Let me know how can I connect my tablet to my router, I have already download the latest version of android, but still problems with my Tablet wi - fi

  Hello BrendaLiza,

  Welcome to the community of Sony.

  Try using the procedure described at the following link:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/35139/c/65%2C66/kW/35139

  If the problem persists, contact your Sony phone team.

  http://tablet.sel.Sony.com/1/1/SGPT111USS/ContactSupport

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Close the laptop and continue to work with external monitor

  Hi, I just bought a laptop HP15 and I want to work with an external monitor, keyboard, and mouse, but I have no space in my office for monitor and notebook open.

  The point is that when I close the laptop being the PC on, it shuts down suddenly and I can't continue to work.

  I can't find the way to establish that the laptop turns off when I close the screen.

  can someone help me?

  Thanks in advance

  Hello

  Let us hope that the next video help (very similar to Windows 7):

  https://www.YouTube.com/watch?v=ODxQchBckPU

  You can ignore the adv after a few seconds.

  Kind regards.

• External monitor flickers and send the display to the laptop screen

  I'm running Windows 7 on a ThinkPad. I have an external monitor from ViewSonic VX2433wm I connect and use scope display mode. This all worked fine for many months, and then a few months ago I started having a problem where, after several minutes, the ViewSonic and the computer screen will be time twinkle a few times and then just what is on the ViewSonic flies to the computer screen. I have updated the monitor display drivers and the laptop, but still have the problem. In addition, I discovered by chance yesterday that, even if the external monitor is turned off but connected to the laptop, the screen of the computer, still wobbles. It's driving me crazy!

  Hello

  I suggest you try the following steps:

  Step 1: change display settings also change color depth then test

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  Step 2: Flickering of the Correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows7/correct-monitor-flicker-refresh-rate

  Try using the display quality problems to solve the problem. It ensures that your video card driver is compatible Windows 7, and checks to see if your color grading, video effects and display settings are correct.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  For more information, see the link below

  Work-and-Play-Better-with-multiple-Monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Troubleshooting-multiple-monitor-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  I hope this helps.

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Impossible to get good resolution on external monitor for laptop

  I am struggling with this situation of resolution of external monitor for the past two weeks. Since the research I did, it is a very common question; However, I did find a solution. I tried all the solutions have not been successful. I hope someone here can help you.

  Asus K50IJ laptop

  Win 7 Home Premium 64 - Bit SP1

  Intel Core2Duo T6600

  4 GB OF RAM

  Mobile Intel 4 Series Express Chipset Family

  Monitor is Samsung SC750_S24C750P connected with VGA cable (laptop doesn't have a HDMI output)

  I reinstalled the drivers for the graphics card; current driver is 8.15.10.2302 of 11/02/2011

  I reinstalled the drivers for the monitor; current driver is 1.0.0.0 11 13, 2012

  Monitor is currently appearing as "HDMI" in the Device Manager; I have chosen "Analogue" and had the same results. Now & then I see "Generic PnP monitor" in the Device Manager. whenever I see it I uninstall it.

  Bottom line is this: settings keep bouncing everywhere. On rare occasions, I saw the picture I want on the external monitor; When I close the lid on my computer (that's why I bought the external monitor - so I can get a bigger picture, not two), the resolution is 1024 x 768. When I disconnect the external monitor, I get the correct image and ratio 16:9 (1366 x 768) on my laptop screen. When I connect the external monitor I have two choices for the resolution: 800 x 600 or 1024 x 768.

  I went to the Intel graphics properties tool and set a resolution to 1920 x 1080 at 60 Hz - 32 bit - proposed by Samsung for their monitor. Result 7 choices of resolution, no '' recommended '' and the higher tag 1366 x 768. I can live with 1280 x 720; When I choose this resolution or anything higher, the laptop screen is superb, but the image on the external monitor covers 1/4 of the screen - the rest is black. Reset the external monitor doesn't change anything.  Computer restarting does not help. Monitor disconnect/reconnect does not help. I tried this routine dozens of times.

  I really need to use the external monitor, and I need the image proportional. Is there a way to do this?

  Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/cant-get-right-resolution-on-external-monitor-for/f3680ff9-684c-428E-a6ac-74fe4171a845

  Hi, thanks for the response.

  I saw this on the Intel Web site so I tried mode extended without change.

  If I had 1366 x 768 on both screens, I would have been delighted - instead, I had two choices on my external monitor: 4:3, covering the entire screen with a distorted image, or 16:9 which covers about 40% of the screen.

  The most likely explanation I can think of is that the external monitor 4:3, I used in the past has left a kind of preference file in my computer which could not be changed, so he kept coming back to 4:3 instead of 16:9. I thought the problem might be the VGA - VGA cable, but this does not explain why I was unable to cover the entire screen on my external monitor with something other than a distorted picture.

  Using the past because I was forced to buy a new laptop. As soon as I plugged on the external monitor, everything was perfect.

  Thanks again for your help.

• screen cracked on dell inspiron 6000 is possible to connect a laptop computer desktop monitor, I have a connection to put pine for laptop 15 it be used for external monitor

  laptop screen broken is it possible to connect external monitor laptop desk has 15 planter back is then how

  "mannyesp" wrote in message News: * e-mail address is removed from the privacy * .com...

  laptop screen broken is it possible to connect external monitor laptop desk has 15 planter back is then how

  Plug into laptop and the monitor turns on and if not detected automatically, and then use the Fn key and F key (will be CRT or a rectangle on the keyface) switches between the laptop screen, laptop and external outside only.  Leave quickly 10 seconds for system key pass.
   
  You may adjust the settings to make sure that the external monitor is the primary instrument and must also adjust the display settings (be normally click with the right button on an empty area of the desktop by clicking on properties or preferences.

• The VAIO VGNSR599GKB external monitor resolution

  Hello

  Just do a full recovery of the system (Windows 7 Pro 64-bit) on a Vaio VGNSR599GKB (intel GM45 chipset) and use it with an external monitor (1600 x 900), the internal display is out.  I am limited to a max of 1360 x 768 resolution.  I have the external screen defined as primary, but it makes no difference in resolution options.  The video driver installed with the recovery of the system are the same version as those available online.  The specifications of my model state that it can produce 2048 x 1536, via the vga port.  It would be nice to have the native res for my monitor as well as 1920 x 1080, if I decide to connect it to my TV.   Any ideas?

  Thank you!

  I ended up uninstalling the original video driver and install the latest Intel driver manually.   The new driver does not yet show 1600 x 900 as a choice, but she had the ability to make custom resolutions, I was able to go this route to get the 1600 x 900 native.  And it actually now shows the 1600 x 900 custom that the resolution "recommended" from the choice of the resolution.  So everything is good now and I hope that it might help someone else.  Thanks for the help.