Lack of commapi.dll elements 6.0 apdproxy.exe

Similar Questions

• lack of PIDOCOB6.dll cannot open the program

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  =========================================
  The article Microsoft Knowledge Base that address the
  Question of PIDOCOB6.dll are no longer available, but I think
  the fix was to uninstall/reinstall Picture It!.

  Also... the error could be related to a printer driver... If you
  recently installed a new printer or your printer driver update
  It is maybe at fault.

  Sorry that's all I have on the subject.

  There is a Picture It! Group on Yahoo Groups... maybe
  could someone offer a few ideas:

  A_Picture_It_Help · Creative with Picture It & SOAK!
  http://tech.groups.Yahoo.com/group/A_Picture_It_Help/

• apdproxy.exe - Unable to locate component

  Start a box opens about five times faster that you can close the box that has the following words;

  apdproxy.exe - unable to locate component

  This application has failed to start because AocCache.dll (and in the next box AdobeQt.dll) could not be found.  Re-installing the application may fix the problem.

  In addition, I'm unable to open Adobe Photoshop Album Starter Edition 3.2.

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 01:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  I also suggest you to uninstall and reinstall Adobe Photoshop Album Starter Edition 3.2

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• message saying missing (UNCDMS.dll) and missing (windows search.exe.) How can I fix this. is there a download anywhere.

  message saying missing (UNCDMS.dll) and missing (windows search.exe.)  How can I fix this.  is there a download anywhere.

  I found the only thing that has worked will Microsoft .com and low loading a Windows Search 4.0 upgade.

  I installed it and now it works fine.  All blogs online even came close helping.

  I did recive the message when windows has finished initializing and when I tried to go the line.

  Thank you for your willingness to help.

• 3 bad picture warnings appear apdproxy.exe - badimage

  on the warnings of bad boot image 3 appear apdproxy.exe - badimage - please check this against your diskette. Adobe reader and other programs will not work, how do I know how to fix

  The apdproxy.exe belongs to Adobe Photoshop Album. You have apparently running at Windows startup, which is not necessary. Remove it from the start. If you use Adobe Photoshop Album and it works correctly, you are finished. If the program does not work, uninstall/reinstall.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot using the Msconfig utility in Windows XP - http://support.microsoft.com/?id=310560 MS - MVP - Elephant Boy - Don computers ' t Panic!

• Try to download the 14 items, I got the number of series, but when I click on the download button, what happens to about 90% and then I get the following message the signature of Download-Adobe-photoshop-Elements-14-(windows)(6).exe is damaged or invalid.

  I try to install Photoshop elements 14, I have the serial number. but when I try to download it happens to almost 90% and then stops I get the message after the signing of the Download-Adobe-Photoshop-Elements-14-(windows)(6). exe is corrupted or invalid. I am running windows 10 ideas where to go from here please

  If you have a corrupted downloads, use a different browser, different wired connection or a download manager.

• Lack of WIMGAPI:DLL FILE

  I am considering the upgrade of Windows 7 to the free offer of Windows 10 but when I initially tried to do this I get the message saying that the file WIMGAPI:DLL is missing and that the procedure cannot go further without him.  How to install or reinstall this file?

  Also, is it safe to download and install Windows 10 and I can go back to Windows 7 if I decide that's not for me?  I know I have to do a full upward and would like someone also tell me the best way to do it.

  Thank you

  HI AJ,.

  Thanks for posting your query in Microsoft Community.

  I understand that you receive error message from the WIMGAPI:DLL FILE is missing and I'll be happy to help fix it you.

  What is Wimgapi.dll?

  WIMGAPI.dll is a type of DLL file associated with Windows 7 Home Premium developed by Microsoft for the Windows operating system. The latest known version of Wimgapi.dll is 1.0.0.0, which was produced for Windows. This DLL file has a popularity rating of 1 star and a security clearance "Unknown".

  What are the DLL files?

  DLLs (dynamic link library ' ") as wimgapi.dll are small programs, similar to the EXE ("executable") files, which allow different programs share the same functionality (for example, print).

  These DLL error messages may appear during the installation of the program, a program software wimgapi.dll related (for example. Windows 7 Home Premium) is running at the Windows startup or shutdown, or even during the installation of the Windows operating system. Track of when and where your error wimgapi.dll is an essential element of the information to solve the problem.

  Let's try the following steps:

  Step 1: Manually reregister Wimgapi.dll using Microsoft register server

  1. Click the Start button.
  2. Type "command" in the search box on ... Are NOT hit ENTER yet!
  3. While now CTRL-SHIFT on your keyboard, press ENTER.
  4. You will be prompted with a dialog permission.
  5. Click Yes.
  6. Type the following command: regsvr32/u wimgapi.dll.
  7. Press ENTER. This will Cancelled the REGISTRATION of your file.
  8. Type the following command: regsvr32 /i wimgapi.dll.
  9. Press ENTER. This desire to RE-SAVE your file.
  10. Close the command prompt window.
  11. Restart the associated program wimgapi.dll error.

  Step 2: Delete or restore the Wimgapi.dll Windows trash

  It is very possible that your wimgapi.dll might have been accidentally deleted. Therefore, it is useful to check your Recycle Bin to see if it is there.

  1. Just to double click on icon to the Trash .
  2. In the upper right corner, find wimgapi.dll.
  3. If the wimgapi.dll file appears in the search results, select itand move it in the following directory:

     C:\Windows\System32\

  4. After the file moving wimgapi.dll to the highest place, restart your computer.

  Step 3: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 4: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  "Is it safe download and install Windows 10 and then I go back to Windows 7?

  Yes, give Windows 10 option go back you to the previously installed operating system where it has been upgraded to Windows 10. For more information, please see: go back to Windows 7 or Windows 8.1

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• 11 lack features of Photoshop elements

  I have redownloaded photoshop elements 11 but it lacks the features I had previously. I put my serial number and that he has known however I can not use the product in the way that I used to. I used to be able to call with photo editing, now he no longer has this ability.

  < left download, installation, implementation - kglad >

  Are you sure that you are in Expert Mode? If the word "Expert" at the top of your screen is not highlighted, click it to go.

• NB305-106 - lack of KBCSL.dll

  After a fake intivirus Palladium Pro infection and clean my NB305-106 with Malwarebyte s, the following alert is displayed at startup: "C/user.../Local/KBCSL.dll, the module cannot be found" (translation from the french message). I can't find any reference to this dll on the web.
  This is perhaps a specific dll from Toshiba?

  If anyone can help. Thank you.

  KBCSL.dll doesn't know about me and I didn t find all the details on this file
  I recommend that you clean the BONES and the registry using CCLeaner (its freeware)
  Maybe it help get rid of this message

  Welcome them

• HP Pavilion desktop computer: lack of accelerometerDLL.dll

  After I've upgraded to window 10, I got this error message everytime I restart the computer:

  the program cannot start because accelerometrdll. DLL is missing from your computer...

  Is there anyway that I can fix this?

  -Paul

  @pcfchung

  Try this.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

  REO

• lack manifest Assembly .dll to import

  Hello Experts!

  I'm trying to import a .dll file that I created using visual studio 2010 sp1 (with c ++) in labview. (let's say the basic example of great described here):

  Walkthrough: creating and using a dynamic library (C++)

  Everything works fine when I'm doing things in visual studio, I'm even able to import the .dll file in .net applications. However, when I try to import this .dll in LabView, I get this error:

  System.BadImageFormatException:

  Could not load file or assembly 'C:\...\yourFile.dll' or one of its dependencies.

  the module should contain an assembly manifest. (Pls see attached screenshot).

  I know that the right of the bat that I need to check my visual studio settings. I did so, I followed the steps below in discussions with care and made sure that the manifest is embedded in the .dll file.

  http://StackOverflow.com/questions/12853502/manifest-for-my-own-native-DLL

  http://msdn.Microsoft.com/en-us/library/ms235229%28V=vs.100%29.aspx

  and here which explains how to integrate it into a process of post: http://msdn.microsoft.com/en-us/library/ms235591.aspx

  http://msdn.Microsoft.com/en-us/library/aa375649%28V=vs.85%29.aspx

  However, I get the same error when you import this .dll in LabView.

  The thing is that I have tons of other .dll files in .net (all in c#) and never had a problem like this. Defintely therefore, something obvious that I'm missing! I would be happy if you could please help me with this?

  redesign of the managed .dll as a assembly file has solved this problem.

• lack of System.dll

  Hello

  I wrote a labview program that needs to talk to MS powerpoint (I have version 2010) and to generate reports. I use ActiveX to access the features of powerpoint. Everything works fine in LV 2012 SP1. However, when I compiled the program into an executable and tried to run, he complained "System.dll is missing." It seems that it is linked to .NET. Any idea?

  Thank you
  Joseph

  Hi Ryan,

  Thanks for your reply.

  I found the progblem, which was actually nothing to do with the powerpoint ActiveX. It was related to a figure of .NET call on the version of the software.

  http://digital.NI.com/public.nsf/allkb/935BA7FB426305398625711E0055F1FA

  I went to the fileVersionInfo.llb instead of use .net and everything worked.

  Joseph

• screen saver not illuminate, lack of MSVCR100.dll

  I lost my screen saver and the monitor will blak with a note that he cannot find the MSVCR100.dll

  Hello
   
  1. what version of Windows are you using?
  2 have you made changes on the computer before this problem?
  3. What is the exact full error message?
   
   
  I suggest you try these methods and check.
   
  Method 1:
  Computers running Windows 7 or Windows Server 2008 R2 no longer meets a black screen, if a screen saver is activated.

  http://support.Microsoft.com/kb/976427

  Method 2:

  Keep the computer in a clean boot and check the status of the issue. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 http://support.microsoft.com/kb/929135 Note: please go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 3:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• How can I correct an error lack of PNCRT.dll

  I get missing pncrt.dll when I view web pages

  Hi sabrinadefoy,

  1. Did you the latest changes on the computer?
  2. What browser you use on the computer?
  3. You receive the error message on all sites?

  The PNCRT.dll file is associated with real player from real networks.

  If you have real player installed on your computer, you can uninstall and reinstall the latest version of real player on your computer and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  http://www.real.com/RealPlayer

• How to restore the missing dll? -lack of plnradt.dll

  I get a message c:users\ (name) \app dataI Miss c:\users\ (name) \app data\local\plnradt.dll.  How to restore the missing dll.

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner