HP Mini 210: Palm Desktop (see 6.2.2) lost address book during and after the upgrade to Windows from December 10
The problem is not with the HP Mini. This computer is running Windows 7 Starter and he Hotsyncs perfectly with my Tungsten C handheld. The problem is with a Dell Vostro, but because it is a problem of Palm, I hope you can help.
My Dell Vostro has been upgraded to Windows 10 in September. I had a few problem get the Palm to synchronize at this time, but I thought her and successfully synched bases Memo, address and the Date of all the way up to 10 Windows update that Microsoft pushed around Christmas.
The first Hot Sync attempt after the update given my address book disappear from desktop ONLY (running version 6.2.2) and I was not able to find a way to restore the address book on the desk.
Handheld still works fine. As I said the HotSync with the HP Netbook (Windows 7 Starter Edition) and I would like to continue to use it as long as ITO still works.
Try using the Import/Export built-in in Palm Desktop.
On the PC that contains the data, go to File/Export (while the address book is open and being viewed). This will produce a file that you can copy to the Dell PC. Use a flash drive, Cloud Computing service, card SD - it doesn't matter.
On the Dell, go to file/import and locate the file.
Windows 10 has caused some 'quirks' to appear in Palm Desktop. We learn that we will!
WyreNut
Tags: HP Tablets
Similar Questions
-
Hello
I mix TRIED TO CONNECT MY BB CLASSIC BB after upgrade to windows 10.
was a mistake to remove and reinstall Office Manager
I have uninstall but could not install again bcs of error
pls advise
The best
Yoni
I managed to install.
now everything is good
THX -
Palm Desktop by Access 6.2.2 shows that media and installation options
I run Palm TX on desktop PC Windows XP with Palm Desktop 4.1.4 and laptop Windows Vista business - no problem with the Xp machine
Palm Desktop by Access 6.2.2 worked but now only shows the multimedia options and install - everything else like calendar and address book does not appear. Installation of the Tools Option shows only the media as Start Up application while the Synchronization Manager Hot shows like (such as calendar and address book) checked (selected) and synchronize files.
First of all, I used the repair option of access, then the option remove access and followed by a relocation of access etc, but access see the only media and install.
I had tried to get the Palm TX to run the Bluetooth and WiFi on the Vista laptop without success and removed the battery Bluetooth BlueSoleil and Driver v2.6.0.1 and succeeded him. I did see if Palm would work with another usb Bluetooth key and solve another problem. It is at this point that I noticed that Palm Desktop by Access did not show the normal functions. I rebooted BlueSoleil and I still have that media and install it on the Palm Desktop.
Anyone have any ideas on how to get Palm Desktop to work properly.
When you open it try right clicking on it and then click Run as admin. If this does not return or if you have more questions after return.
Message is about: Treo 800w (Sprint)
-
After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Can not see faxes sent in Windows Fax and Scan after the migration of Windows XP
I have recently updated from Windows XP to Windows 7. After the upgrade, I don't see my faxes from Windows XP. I used to have a few of them, but now it is empty after the upgrade. I was able to find the actual files of the NT\MSFax\SentItems C:\ProgramData\Microsoft\Windows but it does not appear when you open the program. Does anyone have a solution for this?
I was able to find similar problems on other forums, but their corrections does not apply on mine. It was the first part of the file name for the current user under HKEY_USERS.
Which edition of Windows 7 you are using? Ultimate may be able to use Virtual PC (XP Mode). Editions can use other Virtual Machines but require an XP version under license and unused, while which comes free with XP Mode.
Virtual PC 2007
http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en&TMWindows Virtual PC
Download Windows XP Mode
http://www.Microsoft.com/Windows/Virtual-PC/Download.aspxWindows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."
This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look. Of course you will need a licensed copy of XP to install and run in any of them.
VirtualBox is an impressive VM competitor
http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15If you have XP running (almost) so maybe he can access those files once more?
-
My Thunderbird page is screwed - there is no address book that appears in the toolbar, and I do not see a tab 'write' - just 'message' how can I restore back to normal?
Would so much appreciate help... frustrating.
This is the Contact Sidebar in the entry window. Press F9 when in the write window to enable or disable.
Or you can also access it from the view menu in the window of writing.
Sidebar view-presentation-ContactAnother clue. If something is missing in any look of window on the View Menu. This is how you configure the view you want.
-
My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?
I guess it is asking you to CREATE an access code. You can disable it later.
-
Model F730 laptop and notebook product S/n CNF7415WH7
I bought a laptop (compaq F30 us in the United States) and windows original vista came with the compaq laptop (bought in US). Now, I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office. I don't have the cd or the software with me key since they have not provided for me at the time of purchase
Hello
No there is no way, how the do, because the license of Windows Vista is part of the computer compaq laptop - this is the license OEM - and cannot be separated.
(in case the laptop is broken and cannot be repaired, then the license expiresand cannot be used on another computer)
LC
-
Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation. Anyone who knows how to get rid of the last two options? The good thing is now that I don't have to put a password everytime I turn on the computer.
Press the Windows key + X and then click System
Click on advanced system settings
Click the Advanced tab
Under Startup and recovery, click settings
Select Windows 8 and uncheck the box "time to display list of operating systems.
-
After the upgrade of the APEX 4.2.0.6, I don't see any change
Hello
I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.
When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?
I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?
SQL > SELECT username
2 FROM dba_users
3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')
4 AND USERNAME NOT IN)
5. SELECT "FLOWS_FILES".
6 DOUBLE
7 UNION
8. SELECT 'APEX_PUBLIC_USER' FROM DUAL
9 UNION
10 SELECT SCHEMA s
11 FROM dba_registry
12 WHERE id_comp = 'APEX');
USERNAME
------------------------------
APEX_030200
I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839
Thank you for your help.
Christian
Hi Christian,
chipniz wrote:
Hello Kiran
I redid all installation steps and found that I now have this error:
Service temporarily unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.
When are you facing this error?
- Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
- Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)
What kind of error is it?
- HTTP error with an error like 404 code
- Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)
What is the type of the OHS?
- Oracle Application Server 10g
- Oracle HTTP Server distributed with Oracle Database 11g
Finally it is part of your question:
When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?
What did you mean by that?
- You receive the login for the old version screen
- You receive a blank page
I would like to you check the following things:
- Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
- Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
- Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI
I hope this helps!
Kind regards
Kiran
-
Desktop browsers does not not after the installation of Windows 8 Pro
Since the installation of Windows 8 Pro, I can't use any browser in the office, nothing to do. All problems seem to get fixed by going to the browser on the desktop, but IE, Chrome and Firefox do not work on my desktop. Also just found out that I can't connect to the ITunes Store, either. Please help me with this. Thank you.
Hello
If it works well before?
Try to set Internet Explorer as your web browser as default, it worked for me.
See the steps provided by Jessen: http://answers.microsoft.com/en-us/ie/forum/ie10_cp-windows_cp/how-do-i-make-ie-10-defualt-web-browser/4f5a15f3-7eb5-4212-a6db-089f2426df17
All the best...
-
Mini Mac fails to turn off after the upgrade to El Capitan
Hello
Yesterday, I upgraded to El Capitan, unfortunately, the Mac mini does not stop and Finder is unresponsive, I am at a loss and do not know what action to take, any help would be much appreciated.
Thank you
rachealfromva
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
Format the boot disk and then do a fresh install of Mac OS x
-
After the removal of Windows 10, why do I see Mac HD and Bootcam
I deleted Windows 10 of my MacBook Pro (version 2009). Now, why do I see two disk: 60 GB Bootcamp and Macintosh HD 99 GB? I expected to see only o
Hello waxwingDr,
I understand that you deleted Windows 10, but are still trying to see the drive Bootcamp on your Mac. Let's see if we can understand what is happening.
The question I have is how did you remove the Windows of your Mac partition. Let me know if you did the following steps, described below.
If you installed Windows on a drive with multiple partitions
- Start your Mac in OS X.
- Quit open applications and log out all users.
- Open Boot Camp Assistant, and then click on continue.
- Select "remove Windows 7 or later", then click on continue.
- Do one of the following:
- If your Mac has a single drive internal, click on restore.
- If your Mac has several internal drives, the Windows disk, select 'Restore the disk to a single OS X partition' Select to continue.
Boot Camp: Remove Windows from your Mac
https://support.Apple.com/kb/PH17861There are other ways to correct if you see always the two partitions. Take a look at the following article below that passes on the partitioning of a hard disk. It will be an option to delete a partition and expand your main Partition of Mac.
Disk utility (El Capitan): partitioning a physical disk
https://support.Apple.com/kb/PH22240Expand a volume
If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.
To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device.
WARNING: When you delete a volume, all data thereon is erased. Don't forget to back up your data before you start.
In the sidebar, select the device that contains the volume you want to enlarge, and then click the Partition button .
In the diagram on the left, select the volume you want to delete, and then click the button Delete .
Click on apply.
The volume is deleted, reformatted, and all the free space is assigned to the previous volume.
Click done.
Let me know if it helps.
Take care
-
G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?
Hello
My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.
I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?
Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?
Thank you best regards &,.
Isha
The problem is the operating system of your laptop is 32-bit.
A 32-bit operating system can use @ 3.25 GB installed memory.
Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.
As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.
You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode. You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.
In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.
If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.
-
BlackBerry Desktop Manager Blackberry Smartphones: Microsoft Outlook address book Sync
Hi all
I just fixed my computer after a vista fail and have installed microsoft office 2007 with microsoft outlook connector for my hotmail. I also installed the latest version of BB Desktop Manager, however when I try to set up my address book synchronization with outlook (configure > synchronization > sync 'Configure sync to my desktop computer settings'), I get the error Microsoft Outlook Connector, "a default profile is not found."
I'm not sure what it means, and I'd appreciate any help you can offer!
Thank you very much.
Hello
So that the BB to sync with email, it uses the MAPI profile to connect.
It seems that you do not have a MAPI profile configuration - probably because the Hotmail connector uses a special profile and not a standard MAPI profile...
You have a hotmail Pop3 account?
Can you implement a MAPI profile french: Control Panel - Mail
That should make it work.
Maybe you are looking for
-
Equium A200-1VO - lost internet WIFI connection
Hello Just joined to help my wife - she has a Toshiba Equium A200-1VO and lost WIFI connection internet.This is the laptop that I am sending this through my laptop. Tried to find our home network but the laptop shows not all internet connections at a
-
Laptop HP Pavilion 17-e153sa camera doesn't work do not
Hi all Good day, kindly help me with may HP integrated photo does not, his work in 8 before windows after upgrading to 10 64 bit Windows, the camera not detected, I download the HP Wizard can not detect, where can I find the driver? Laptop HP Pavilio
-
MBAM Sccm Bitlocker - automatically have bitlocker encrypt without connecting to the computer
Push us to bitlocker with SCCM and make changes in policy with GPOS and manage bitlocker with MBAM. During load tests, it seems that Bitlocker requires the user connects and responds to start the encryption process. Is there a way to have MBAM/Bitl
-
Is it possible to install Windows XP with USB / (Pendrives) with a CD?
is it possible to install windows xp with USB / (Pendrives) with a CD?my CD drive is not working... but I need to upgrade xp... How do with usb?a pls answer * original title - request for installtion xp... *.
-
Get the old cartridge of the installed in deskjet 2540 black version
I bought new ink cartridges for my deskjet all-in-one 2540. Are filled with cartridges, but they have the same number as the original cartridges shipped with the printer, except that they are 61XL instead of 61. The Tricolor cartridge will work, bu