Lack of Configuration section in VAMI, vCenter active watch is not Accessible after upgrade from 5.5 to 5.8

Hi all! I'm having a bit of a problem that I can't find a solution for anywhere.

I have a lab with two boxes of vcsa under 5.5 U2d, and wanted to move to 5.8 SRM. I started the VRA 5.5.1 (I do not remember, real version number which was with MRS 5.5.1), mount the ISO 5.8 on both sides, restarted both, took the update of the CD (following the official update steps), but after the restart, the two vCenters show "enabled (not available)" and still list it as 5.5.1.

I have validated the RV service is running. I have been following this thread, regenerated certificates for the TWO vCenters & TWO VRAs: vsphere upgrade from 5.5 to 5.8 Server replication enabled (not accessible) has yet no joy.

I checked the CROWD and the IP address is correct. I tried to check /opt/vmware/hms/conf/extension.xml for the thumbprint and the file does not exist on each box, the only thing it is extension - template.xml.

On the one hand, I have reset the vCenter database (/ usr/sbin/vpxd - d of VMware KB: reset the vCenter Server repository embedded for vCenter Server Appliance 5.x ), deployed a new VRA 5.8, and he had to register very well. It's then it dawned on me what missed me: almost all the Startup Configuration where you specify the vCenter (see attachment)

For grins, I recorded the VRA 5.8 of the 'old' vcsa work and tried to save it to the 'new' vcsa, which he could not with a lot of what looked like errors, assuming that because of 'new' vcsa already having a recorded SOAP VRA. I re-recorded it back to the 'old' vcsa and is happy. Installed SRM 5.8 (uninstalled 5.5 because I started with a clean database in the vcsa) and all is well on the side of the 'old '.

I'm trying not to go this route on the 'new' side, as I a VDS, vSAN and twice as many hosts, so I won't recreate the vDC, cluster, add guests, etc. I copied to /opt/vmware/hms/conf/extension-template.xml /opt/vmware/hms/conf/extension.xml and restarted. Footprint arises, but still no configuration tips.

Anyone have any ideas?

Thanks for your reply. You said that the VRA is on a cluster, East of thatcluster HA-enabled? Because where HA must restart the VRA on another host, it does so through the ESX host and this could have emptied the OVF environment. And to even you'll always a working configuration until you start the upgrade or you try to perform any operation through VAMI configuration page. To be on the safe side, I think before upgrade, you can power off and then turn the unit on (simple restart is not enough) to make sure that the EPS of the FVO is recreated.

Tags: VMware

Similar Questions

vCenter host name does not change after upgrade to different to host

Hello
Yesterday I've updated vcenter server 5.0 to 5.1 in my lab environment. everything goes well, I faced some problems after the upgrade to 5.1. Below the questions I met
1 vcenter service is stopped - solved by stopping Server vcenter 5.0, because my SQL Server must always connect to my server vcenter 5.0. Basic Upgrade to 5.1
The host name of vcenter 5.0 is vcp.lab.com
2 vcenter 5.1 host name is vcp5.lab.com, when I connect to vcenter server with the host name or IP address still shows the old vcp.lab.com at the top of the console to vcenter
How to solve this kind of issue. Is there any problem with certification because I copied the secure channel to the server vcp5 Server certification.

Go to the menu Administration-> vCenter Server settings-> the run settings and type the name of the new server vCenter on vCenter Server Name.

vCenter Server Service does not start after P2V

Hello community.
A problem that I have not been able to solve and looking for help.
Problem:
vCenter Server Service does not start after that Windows Server was P2V would be. We get an ERROR 2 of the Service. Get the error of the system Windows 7024 event log.
History:
The client, I currently work with that tries to smash to the high location of the DEV VCENTER. Location of DEV vcenter works now all for this site (domains, dns and all development servers). If its VCENTER PRODUCTION of this location. Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box. Let's break the SSO, SQL and VCENTER in their own servers. However, the client wants to re - use the current physical server for SQL Server. So I need P2V physical server existing until I can start the new environment.
I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works. Fails every time with the 2 ERROR Code. I was unable to get a KB of VMWARE item that corresponds to the issue I'm having. ERROR 2 code has many articles and none have worked.
Details:
vCenter 5.1 Build 799731
SQL 2008 R2
Windows 2008 R2
When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

When I saw the Windows system event log I get this error:

EVENT ID: 7024

The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

-> Backtrace:

-> backtrace [00] rip 000000018018977 a

-> backtrace [01] rip 0000000180100 c 98

-> backtrace [02] rip 0000000180101fae

-> backtrace [03] rip 000000018008aeab

-> backtrace [04] rip 00000000005 b 4971

-> backtrace [05] rip 0000000000551298

-> backtrace [06] rip 00000000005516 c 9

-> backtrace [07] rip 00000000004c0fae

-> backtrace [08] rip 00000001405bbfb8

-> backtrace [09] rip 000000013f4b0078

-> backtrace [10] rip 000000013f4b016a

-> backtrace [11] rip 000000013f4b0279

-> backtrace [12] rip 000000013f4b0609

-> backtrace [13] rip 000000013f7f2903

-> backtrace [14] rip 000000013ff9e4b9

-> backtrace [15] rip 000000013ff9835c

-> backtrace [16] rip 00000001401b8a3b

-> backtrace [17] rip 000007fefedca82d

-> backtrace [18] rip 000000007783652d

-> backtrace [19] rip 0000000077ccc521

->

2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate. Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter. All Services have been changed for local accounts. All network and ODBC parameters are able to see the server... aka the server can see. I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...
Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems. Only when its summer P2V would have done that themselves.
I can't get this number. Need help.
Thoughts?
Thank you
BostonTechGuy

In this case, we have finished rebuilding the vCenter and all migrate on. Wish had better put up-to-date, but ultimately, it's what has been done.

Thank you

BostonTechGuy

vCenter does not connect after upgrade to 2.0

I just upgraded to version 2.0 GA and after that it's over I had a message on it is not not able to connect to one of my vCenter servers. It worked before the upgrade.
When I try and test the connection I get the following error: transport HTTP error: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: certificate is not consistent with the constraints of the algorithm
I restarted vCenter services without a change in behavior. vCenter version is 5.0 Update 2

The problem has been resolved. It is thanks to our vCenter server with a 512-bit SSL on it (was a previous update to 4.0).

Java's LogInsight 2.0 security settings need to be at least 1024-bit SSL. As a temporary work around support changed settings only need a 512-bit key. It needed a reboot of the Insight journal.

I'm fine with this fix since we planned to deploy a new server vCenter in the coming months.

vCenter Server service does not start after you run Windows updates

On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied. The vCenter server is a datacenter 2008R2 VM.
The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1. I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:
SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. CUSTOMER:: 1
The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event is on another computer, the display information had to be saved with the event.
The following information has been included in the event:
Could not initialize the VMware VirtualCenter. Closing...
the message resource is present, but the message is not in the string/message table
Anyone encountered this before?

Hello.

I didn't know this, but the info in Ko 1007669 may be useful.

Good luck!

vMotion does not work after upgrade to vCenter 4.1

Hi all
I've recently improved our vCenter 2.5 update 5 to vCenter 4.1 on a new server. our guests are all still 3.5 update 5.
The old server was removed and the 2.5 vcenter application license server is installed on the new vCenter.
in vCenter licenses section, it says under "VI3 vMotion" not used "for each host.
In the 2.5 license server reports vMotion licenses enough for all the guests, but also in use 0.
I'm stuck now to know how I can get active vMotion again. Any help would be greatly appreciated!
-
Richard Roberts

Follow steps (4 and 5) in http://kb.vmware.com/kb/1012909

André

vCenter SSO 5.5 - users are not editable when upgrading from a 5.1.

I did some tests with vCenter 5.5 on Win2008 R2 (unproductive) installation.
After the upgrade of SSO, I noticed a problem with the internal users of SSO.
-I can't change user properties.
Everything is grey. No change of password, without unlocking. etc. (using [email protected] or another administrator)
Surprisingly, I can create a new user and change everything I need. But all the old user accounts whose [email protected] are not editable.
I did two SSO upgrade configurations instances. Both have the same problem. It does not accur with a new facility.

All the world has noticed the same problem?
How can I solve this problem?

With vCenter 5.5.0a this problem has been resolved.

All users are now editable.

vCenter service starts do not automatically after the server restarts

Hello
We use vCenter Server 5.5.0 build 1476327 installed by using Installation Mode on Windows Server 2008 R2 with SQL 2008 R2. All SSO, inventory service, vcenter, customer web etc, are on the same server.
VCenter server service is set to automatic (startup type), Local System (connect as). However at the restarting windows server vCenter, vcenter service does not automatically start and it gives error in the vpxd.log below. But if we manually start the services vcenter, it works very well.
2014 02-12 T 17: 38:49.186 + 05:30 [03016 info 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VC55DB with username vpxuser
2014 02-12 T 17: 38:55.750 + 05:30 [03016 info 'Default'] [VdbSchemaLoader::LookupSchemaFromDB] loaded schema information and DB index
2014 02-12 T 17: 38:59.586 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6058ed8 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12094
2014 02-12 T 17: 39:12.034 + 05:30 [02040 WARNING opID "VpxProfiler" SWI-56f32f43 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12448
2014 02-12 T 17: 39:24.094 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-31169898 =] VpxUtil_InvokeWithOpId [TotalTime] took 12059 ms
2014 02-12 T 17: 39:36.549 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-6a5d128c =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12451
2014 02-12 T 17: 39:48.618 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6d7d4b3 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12045
2014 02-12 T 17: 40:00.625 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-55e83917 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12007
2014 02-12 T 17: 40:12.994 + 05:30 [02040 WARNING opID "VpxProfiler" SWI - 3113 c 398 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12251
2014 02-12 T 17: 40:25.196 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2014 02-12 T 17: 40:37.852 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12646
2014 02-12 T 17: 40:49.875 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12019
2014 02-12 T 17: 40:56.287 + 05:30 [03016 info 'Default'] judgment of VMware VirtualCenter forcing now
Check connectivity ODBC (SQL authentication), looks very good. Don't know what are these VpxProfiler warnings in the newspaper, after which the VirtualCenter is forced to stop.
Please advise on this.
Thanks in advance!

Try to set the vcenter service in Automatic (delayed start mode) leave the sql first service started. to the Webcomic.

hope it will settle your error. same problem I faced and fixed in this way.

Thank you.

VCenter 5.1 does not start after joining the domain

I have a VCenter Server 5.1 that I had to join the domain. The domain controller has died and I had to rebuild the domain from the ground controller. It is early in the generation of the environment and the user does not backup turns yet. The SQL database is on another virtual machine which I added to the domain and at least I think I have fixed the AD accounts on the SQL Server. I ping the SQL server machine vcenter server. I also have a Web server that uses the SQL Server and it works correctly. All thought that the web server uses a SQL account and not a Windows account. Having said that it's the VCenter error I get. I don't know where I can get more detailed logs. VCenter service dies as soon as I try to start it.
Here's the log of events
Application error event ID 1000
Name of the failing application: vpxd.exe, version: 5.1.0.35539, time stamp: 0x514d6239
Name of the failed module: vmacore.dll, version: 5.1.0.35539, time stamp: 0x514d5992
Exception code: 0xc0000005 fault offset: 0x00000000000022f7 failed process id: 0xbd0
Start time of application vulnerabilities: 0x01cefb39789687d1
The failing application path: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe
Path of the failing module: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vmacore.dll
Report ID: bf5595b0-672c-11e3-958d-000c2944f450

Just rebuilt the VCenter server, was faster than to try to fix it.

Office Ultimate 2007 guard Assembly and re - configure any time, I try to use Outlook 2007 after upgrading from Vista Ultimate 32 bit to Win 7 Ultimate. Something is definitely wrong with Outlook 2007 and Windows 7

There must be a fundamental incompatibility between Win 7 and Outlook 2007. It would be nice if Microsoft looked into this right away and immediately corrects before we start trashing Win 7.

Hello oguchi,.

Thanks for posting on the Microsoft answers Forum.

Office 2007, including Outlook 2007 are compatible with Windows 7.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Office%202007&page=1

If you're still having problems with Outlook 2007, it would be better to post in the Forums Office.
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

Hope that helps.

Sincerely, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Activation problems in Adobe products after upgrade of Windows 8!

After the installation of Windows 8, my standard CS4 applications (InDesign, Illustrator, etc.) seem to have been installed on a new machine and indicates that the software has been installed for the maximum number of the machine. I have the programs installed on one computer now - I have either of activcated programs on my another desktop or deleted after imaging system after malware attacks. Is there a work around for this problem of installation of Windows 8?

Since it is the same machine that you are trying to reinstall the software,
Please contact support @ 8008336687 and they would be able to increase the number of licenses for you as an exception.

Remember in the future if you want to uprade the computer or install the software on a new computer turn off the software first else it would give you the same error.

Activation of the autoconfig on DB level after upgrade from 9i and 10g
Environment: 11.5.10.2
Number of nodes: 2
Node1: Db & Manager of Conc
Node2: Admin, web Forms, Reports,

I've updated the database of 11i Apps 9.2.0.6 to 10.2.0.4

Now I have to activate autoconfig on DB new home

(1) I have generated appsutil.zip on node2 and moved to the db node. I have unziped the file. However, it doesn't have the directory of $ORACLE_HOME/appsutil/scripts and its scripts, what is the problem, why the scripts are not generated?

(2) so far, we have no file env on db level as autocofnig not yet running on new home 10 g
So, how we can create the contextfile file & env?
John,

(1) I have generated appsutil.zip on node2 and moved to the db node. I have unziped the file. However, it doesn't have the directory of $ORACLE_HOME/appsutil/scripts and its scripts, what is the problem, why the scripts are not generated?

See Note: 377495.1 - how to recreate the directory/scripts / / appsutil
https://MetaLink.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=377495.1

(2) so far, we have no file env on db level as autocofnig not yet running on new home 10 g
So, how we can create the contextfile file & env?

Copy the files env the ORACLE_HOME of 9i to 10g ORACLE_HOME and manually change (or set manually environment variables), and then generate the context of database file by running 'perl adbldxml.pl' as explained in the note quoted above.

How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

This is not possible with the way in which we collect information.

formsweb.cfg Custom Configuration Section

I want to create a section of custom configuration in my formsweb.cfg file that will work with any version of SUN JRE what a user has installed. I want to crush the parameters in our default configuration section, which forces the use of the SUN JRE version 6 update 22. Is this possible?

I've included the parameters that are present in our default configuration (below) in the hope that someone can help me to update these settings so that it runs with any JRE version (or even an update of Version 6) that the user has installed.

{code)

[ttmsmenu_anyJRE]
# Set the default SUN JRE with Java plugin 6 22
jpi_download_page = http://java.sun.com/javase/downloads/
# Parameter related to the version of the Java Plugin
jpi_classid = clsid:CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase = http://java.sun.com/update/1.6.0/jinstall-6u22-windows-i586.cab#Version=1, 6,0,22
# Parameter related to the version of the Java Plugin
jpi_mimetype = application/x-Java-applet; YPI-version = 1.6.0_22

# Using webutil
baseHTMLjinitiator = webutiljpi.htm
baseHTMLjpi = webutiljpi.htm
baseHTML = webutilbase.htm

Any help would be greatly, greatly appreciated.

Oh... I did not understand that specifying the Version 6, update 22 required that the client workstation must be this version OR higher installed. I thought that this meant that the user will be prompted to install the same even if the version specified a newer version (say 6 Version, last update 29) has been installed.

Well, B.11.11 works with Java 5 (1.5.0) and 6 (1.6.0). I can't say for Java 1.4. Essentially, your JRE will leave to the version specified in your Formsweb.cfg.

I am understanding that, by specifying the Version 6, update 22 in my custom configuration as the client workstation could have 6 Version, last update 29 (without ever installing the updated 22)? Or update 22 should be there in addition to the new update of the 29?

This is correct, if your application is configured to 1.6.0_22 and you have 1.6.0_29 installed on a client, the 1.6.0_29 version will be step-down automatically to 1.6.0_22. You need not have two installed updates.

Craig...

10gR 3 installation issue (#1): user activity portlet does not
I installed a 10gR 3 clean, complete installation Windows / sql server. I have not installed anything that did not come included, so no analytical / editor / collab / etc. The documentation lacks a bit, but I don't think I've done all this evil.

Then, when I added the portlets user state and activity of users to a my page, the user status portlet works, but the user activity portlet displays not my previous statutes.

I looked in my database of Notification (CNS), and I can see my former status, so I know they are there happen correctly.

In looking at PTSPY, there seems to be some problem with a connection token (and Yes, I copy the value of PTSERVERCONFIG with settingid 65 in the Configurator).

This is what is displayed in PTSPY when you click on the button refresh portlet on the user activity portlet. As you can see, there are a lot of 'guest user', even if I am logged on as administrator.

ALI logging spy Version 6.1
* Newspaper wrote at 2009-04-10 11:50:51.

PLACE MESSAGE ID DATE TIME COMPONENT OF APPLICATION THREAD LEVEL
== ====== ======== ==== ========= =========== ===== ======== =======
10/04/2009 0 11:50:25.327 Action UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.interpreter.Interpreter seized handleRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_6_0_203_0_100_43/ < ptLogMsgEnd >
1 10/04/2009 11:50:25.327 Action Gateway portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers HandleGatewayRequest entry: GET http://localhost:80/portal/server.pt/gateway/PTARGS_6_0_203_0_100_43/ < ptLogMsgEnd >
2 10/04/2009 11:50:25.327 Info Gateway portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers current user: 1 admin < ptLogMsgEnd >
3 10/04/2009 11:50:25.327 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.login.SSOAuthenticator SSO is disabled globally. < ptLogMsgEnd >
10/04/2009 4 11:50:25.327 Core Info portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.core.PTBaseObjectManager opening and querying of object with Id: 203 and Class Id: 43 < ptLogMsgEnd >
5 10/04/2009 11:50:25.397 Info PortletProvider portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider CSPPortletProvider.GetContentURL, content ID is 5, the URL is http://house-2aojhum1o:21030/activityservice/useractivityfeed.jsf < ptLogMsgEnd >
2009-04-10 6 11:50:25.397 Info PortletProvider portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider Portlet ID 203, 1 user ID = CSPPortletProvider.GetContent access [http://house-2aojhum1o:21030/activityservice/useractivityfeed.jsf] < ptLogMsgEnd >
2009-04-10 7, 11:50:25.397 Info PortletProvider portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider Portlet ID 203, 1 Userid = CSPPortletProvider.GetContent: Gateway timeout is set to 1200000 Ms. < ptLogMsgEnd >
8 10/04/2009 11:50:25.397 Info PortletProvider portal .house - 2aojhum1o.Administrator #1 com.plumtree.server.impl.portlet.providers.CSPRequest CSPRequest .NET: setting the HTTP Get < ptLogMsgEnd > method
2009-04-10 9, 11:50:25.407 Core Info portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.core.TokenUtility PTTokenUtility::CreateToken CHIPS: create tokens for: 1 | 1239378925 | < ptLogMsgEnd >
10 4-10-2009 11:50:25.537 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Entering handleRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_0_0_206_0_0_47/cns/rss/2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml <ptLogMsgEnd>
11 4-10-2009 11:50:25.547 Action Gateway portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Entering HandleGatewayRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_0_0_206_0_0_47/cns/rss/2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml <ptLogMsgEnd>
2009-04-10 12, 11:50:25.557 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.TokenAuthenticator TokenAuthenticator::UseThisAuth: check if there is a token of replication. < ptLogMsgEnd >
2009-04-10 13 11:50:25.557 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.Authenticator connection as a guest user: 2 < ptLogMsgEnd >
2009-04-10 14, 11:50:25.557 Info Portal_UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 before com.plumtree.portaluiinfrastructure.login.PTLoginHelper attemptGuestLogin(), comments userid = 2 < ptLogMsgEnd >
2009-04-10 15, 11:50:25.557 Info Portal_UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 before com.plumtree.portaluiinfrastructure.login.PTLoginHelper internalLogin() < ptLogMsgEnd >
2009-04-10 16, 11:50:25.557 Core Info portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTSession logged in as user 'Guest' < ptLogMsgEnd >
2009-04-10 17, 11:50:25.557 Info UI_Infrastructure portal .house - .NET #8 com.plumtree.uiinfrastructure.login.LoginHelper 2aojhum1o.Administrator before DoTasksAfterLogin() < ptLogMsgEnd >
2009-04-10 18, 11:50:25.557 Info Portal_UI_Infrastructure portal .house - .NET #8 com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper 2aojhum1o.Administrator before CachePersonalSettings() < ptLogMsgEnd >
2009-04-10 19, 11:50:25.557 Core Info portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTBaseObjectManager opening and querying of object with Id: Id and class 2: 1 < ptLogMsgEnd >
2009-04-10 20, 11:50:25.597 WARNING Portal_Common portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions cannot find the list of locale for the browser to map the regional settings to user interface supported local to accept-language header. Using the system default locale. < ptLogMsgEnd >
2009-04-10 21, 11:50:25.597 Info Portal_Common portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions user language selection based on the local ownership of en - us language mind accept < ptLogMsgEnd >
2009-04-10 22, 11:50:25.597 Info Gateway portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers current user: Guest 2, < ptLogMsgEnd >
2009-04-10 23 11:50:25.597 Info Gateway portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers redirect to login page because of insufficient privileges. < ptLogMsgEnd >
2009-04-10 24, 11:50:25.597 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.Authenticator redirection for you connect to space Login < ptLogMsgEnd >
Parents 25 AActivitySpace 10/04/2009 11:50:25.597 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.Redirect attempt to use the SetSpaceCreateNew method with a null value. < ptLogMsgEnd >
2009-04-10 26, 11:50:25.597 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.SSOAuthenticator SSO is disabled globally. < ptLogMsgEnd >
2009-04-10 27 11:50:25.597 Info Gateway portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers HandleGatewayRequest control back to interpreter to process login page. < ptLogMsgEnd >
2009-04-10 28, 11:50:25.597 Action Gateway portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers HandleGatewayRequest Leaving (back the flow of control to the interpreter) - User ID: 2 < ptLogMsgEnd >
2009-04-10 29, 11:50:25.597 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.TokenAuthenticator TokenAuthenticator::UseThisAuth: check if there is a token of replication. < ptLogMsgEnd >
2009-04-10 30, 11:50:25.597 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter current user: Guest 2, < ptLogMsgEnd >
31 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Redirecting to http://localhost/portal/server.pt?redirect=http%3A%2F%2Flocalhost%2Fportal%2Fserver.pt%2Fgateway%2FPTARGS_0_0_206_0_0_47%2Fcns%2Frss%2F2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml&space=Login&cached=false <ptLogMsgEnd>
2009-04-10 32 11:50:25.607 Action UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8, com.plumtree.uiinfrastructure.interpreter.Interpreter Leaving handleRequest - User ID: 2 < ptLogMsgEnd >
33 4-10-2009 11:50:25.697 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Entering handleRequest: GET http://localhost:80/portal/server.pt?redirect=http%3A%2F%2Flocalhost%2Fportal%2Fserver.pt%2Fgateway%2FPTARGS_0_0_206_0_0_47%2Fcns%2Frss%2F2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml&space=Login&cached=false <ptLogMsgEnd>
2009-04-10 34, 11:50:25.697 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.TokenAuthenticator TokenAuthenticator::UseThisAuth: check if there is a token of replication. < ptLogMsgEnd >
35 10/04/2009 11:50:25.697 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.Authenticator logging in as a guest user: 2 < ptLogMsgEnd >
2009-04-10 36, 11:50:25.697 Info Portal_UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 before com.plumtree.portaluiinfrastructure.login.PTLoginHelper attemptGuestLogin(), comments userid = 2 < ptLogMsgEnd >
2009-04-10 37, 11:50:25.697 Info Portal_UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 before com.plumtree.portaluiinfrastructure.login.PTLoginHelper internalLogin() < ptLogMsgEnd >
2009-04-10 38, 11:50:25.697 Core Info portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTSession logged on as user 'Guest' < ptLogMsgEnd >
2009-04-10 39, 11:50:25.707 Info UI_Infrastructure portal .house - .NET #8 com.plumtree.uiinfrastructure.login.LoginHelper 2aojhum1o.Administrator before DoTasksAfterLogin() < ptLogMsgEnd >
40 10/04/2009 11:50:25.707 Info Portal_UI_Infrastructure portal .house - .NET #8 com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper 2aojhum1o.Administrator before CachePersonalSettings() < ptLogMsgEnd >
2009-04-10 41, 11:50:25.707 Core Info portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTBaseObjectManager opening and querying of object with Id: Id and class 2: 1 < ptLogMsgEnd >
2009-04-10 42, 11:50:25.717 WARNING Portal_Common portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions cannot find the list of locale for the browser to map the regional settings to user interface supported local to accept-language header. Using the system default locale. < ptLogMsgEnd >
43 10/04/2009 11:50:25.717 Info Portal_Common portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions user language selection based on the local ownership of en - us language mind accept < ptLogMsgEnd >
2009-04-10 44, 11:50:25.717 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter current user: Guest 2, < ptLogMsgEnd >
2009-04-10 45 11:50:25.717 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 current com.plumtree.uiinfrastructure.interpreter.MVCController of space is < ptLogMsgEnd > connection
46 4-10-2009 11:50:25.727 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.MVCController Redirect after login QS param: http://localhost/portal/server.pt/gateway/PTARGS_0_0_206_0_0_47/cns/rss/2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml <ptLogMsgEnd>
2009-04-10 47, 11:50:25.727 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.MVCController current control is DefaultLoginControl < ptLogMsgEnd >
48 10/04/2009 11:50:25.727 Info UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Displaying page < ptLogMsgEnd > Login
49 10/04/2009 11:50:25.727 Info Portal_Common portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.common.uiparts.PlumtreeDP Displaying page layout Basic Page using Page layout with ID 40 < ptLogMsgEnd >
50 10/04/2009 11:50:25.747 Info Portal_Common portal .house - 2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.common.uiparts.PlumtreeDP display layout Login Page using the Layout of the Page with ID 46 < ptLogMsgEnd >
10/04/2009 51 11:50:25.757 Action UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #8, com.plumtree.uiinfrastructure.interpreter.Interpreter Leaving handleRequest - User ID: 2 < ptLogMsgEnd >
2009-04-10 52 11:50:25.918 error Storybook Logger activityservice.house - 2aojhum1o.Administrator http-21030-exec-3 java.lang.Class error during extraction of the CNS of power: com.sun.syndication.io.ParsingFeedException: invalid XML: error on line 1: white spaces are required between publicId and systemId.
com.sun.syndication.io.ParsingFeedException: invalid XML: error on line 1: white spaces are required between publicId and systemId.
at com.sun.syndication.io.WireFeedInput.build(WireFeedInput.java:182)
at com.sun.syndication.io.SyndFeedInput.build(SyndFeedInput.java:122)
at com.bea.shaboo.impl.support.UserActivityBean.getActivityList(UserActivityBean.java:74)
at com.bea.shaboo.impl.support.UserActivityBean.getActivityStreamModel(UserActivityBean.java:177)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.myfaces.el.PropertyResolverImpl.getProperty(PropertyResolverImpl.java:400)
at org.apache.myfaces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:71)
to org.apache.myfaces.el.ELParserHelper$ MyPropertySuffix.evaluate (ELParserHelper.java:532)
at org.apache.commons.el.ComplexValue.evaluate(ComplexValue.java:145)
at org.apache.myfaces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:378)
at javax.faces.component.UIData.getValue(UIData.java:779)
at org.apache.myfaces.component.html.ext.HtmlDataTableHack.createDataModel(HtmlDataTableHack.java:350)
at org.apache.myfaces.component.html.ext.HtmlDataTableHack.getDataModel(HtmlDataTableHack.java:333)
at org.apache.myfaces.component.html.ext.HtmlDataTableHack.getRowCount(HtmlDataTableHack.java:75)
at org.apache.myfaces.custom.datalist.HtmlListRenderer.encodeChildren(HtmlListRenderer.java:107)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:319)
at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:343)
at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:251)
at org.apache.myfaces.taglib.UIComponentBodyTagBase.doEndTag(UIComponentBodyTagBase.java:55)
at org.apache.jsp.useractivityfeed_jsp._jspx_meth_t_005fdataList_005f0(useractivityfeed_jsp.java:442)
at org.apache.jsp.useractivityfeed_jsp._jspx_meth_h_005fform_005f0(useractivityfeed_jsp.java:247)
at org.apache.jsp.useractivityfeed_jsp._jspx_meth_f_005fview_005f0(useractivityfeed_jsp.java:178)
at org.apache.jsp.useractivityfeed_jsp._jspService(useractivityfeed_jsp.java:108)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:654)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:445)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:379)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:292)
at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:415)
at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:352)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
at org.apache.myfaces.webapp.MyFacesServlet.service (MyFacesServlet.java:74)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.RequestedUserFilter.doFilter(RequestedUserFilter.java:61)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.AccountCreationFilter.doFilter(AccountCreationFilter.java:57)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.KodoSessionFilter.doFilter(KodoSessionFilter.java:52)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.ShabooSecurityFilter.doFilter(ShabooSecurityFilter.java:74)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.InitializationCheckFilter.doFilter(InitializationCheckFilter.java:42)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
at org.apache.coyote.http11.Http11NioProcessor.process(Http11NioProcessor.java:887)
to org.apache.coyote.http11.Http11NioProtocol$ Http11ConnectionHandler.process (Http11NioProtocol.java:696)
to org.apache.tomcat.util.net.NioEndpoint$ SocketProcessor.run (NioEndpoint.java:2009)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:650)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.jdom.input.JDOMParseException: error on line 1: white spaces are required between publicId and systemId.
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:468)
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:851)
at com.sun.syndication.io.WireFeedInput.build(WireFeedInput.java:178)
... more than 71
Caused by: org.xml.sax.SAXParseException: White are required between publicId and systemId.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException (unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.fatalError (unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError (unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError (unknown Source)
at org.apache.xerces.impl.XMLScanner.reportFatalError (unknown Source)
at org.apache.xerces.impl.XMLScanner.scanExternalID (unknown Source)
at org.apache.xerces.impl.XMLDocumentScannerImpl.scanDoctypeDecl (unknown Source)
to org.apache.xerces.impl.XMLDocumentScannerImpl$ PrologDispatcher.dispatch (unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument (unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse (unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse (unknown Source)
at org.apache.xerces.parsers.XMLParser.parse (unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse (unknown Source)
to org.apache.xerces.jaxp.SAXParserImpl$ JAXPSAXParser.parse (unknown Source)
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:453)
... more than 73
< ptLogMsgEnd >
53 10/04/2009 11:50:26.128 Info PortletProvider portal .house - 2aojhum1o.Administrator #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider CSPPortletProvider.GetContent .NET: Receieved complete response. Application state is [the processing of this application was completed with success] < ptLogMsgEnd >
2009-04-10 54 processors 11:50:26.128 Info portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.transformers.TurboParser found space names unique token "$PORTLET_ID$" < ptLogMsgEnd >
10/04/2009 55 transformers 11:50:26.128 Info portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.transformers.TurboParser found a token < ptLogMsgEnd >
56 10/04/2009 11:50:26.128 Info PortletProvider portal .house - 2aojhum1o.Administrator #1 com.plumtree.server.impl.portlet.providers.GatewayContent GatewayContent .NET: build the text response with status code 200 and Content-Type text/html < ptLogMsgEnd >
57 10/04/2009 11:50:26.128 Info Gateway portal .house - 2aojhum1o.Administrator .NET # com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Displaying page 1 < ptLogMsgEnd > GatewayBinary
2009-04-10 58 11:50:26.138 Action Gateway portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers HandleGatewayRequest Leaving (treated request) - User ID: 1 < ptLogMsgEnd >
59 10/04/2009 11:50:26.138 Action UI_Infrastructure portal .house - 2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.interpreter.Interpreter Leaving handleRequest - pre-filter put end to execution. < ptLogMsgEnd >
I had the same problem. I've identified some problems with the functioning of this portlet. There is a work around, but not a good thing. To correct this portlet, I had to go to the configuration manager, 'Notification Aqualogic Service-> News FEED' and uncheck 'Bridge RSS Feed URL'. This makes this portlet is working correctly, the side effect is that it breaks all RSS feeds in collab. Then, move that to go add a gateway configuration to all the web services of portlets collab... I intended to present a medical disorder, but never had him. We do not use this portlet currently, so I bailed on the work around.

Lack of Configuration section in VAMI, vCenter active watch is not Accessible after upgrade from 5.5 to 5.8

Similar Questions

Maybe you are looking for