Lack of controls at the first HP
I know that HP Premium is not an HP 50 G upgrade, but in the absence of better information on the plans of HP, everyone is looking to the first as the new flagship of HP Calculator. It is reasonable to infer that first HP includes all the commands that are available in the HP 50 g?
I am looking for the following 2 commands: ZFACTOR and DARCY. They are not in the catalogue of the first HP and are not mentioned in the User Guide. They are available at all?
Thank you!
> is - this reasonable to infer that first HP includes all the commands that are available in the HP 50 g?
N ° and the 50g has no orders or ability first. Basically, these sepecific very specialized type of field controls that are remnants of the 48 series or earlier is not a priority. Especially since the vast majority are so darned easy to do as a user program because they are basically just a simple function that gets evaluated. Another good example is the F0λ function.
Neither of those two you mention are in the system.
Note that this does not mean they will never be added, but first is defintiely not marketed to the same users that (again) after so many years has found the 48 series absolutely perfect for them.
Tags: HP Tablets
Similar Questions
-
Control within the first screen takes the whole monitor all the time
At first it happened from time to time and now it happens all the time.
I have two monitors and when I'm not working in first Pro CC image what ever is on screen in the PP I'm working currently on will take succession the entire screen 1... Monitor 2 is fine and is never the image.
This happens only when I'm not working directly. So if I switch screens or just take a few minutes break from PP I will come back and the entire screen will be the last image I had on the monitor in PP I was working on. Never another image.
When I click a few times on both monitor and / or come and go with my mouse between the two monitors and click on it will return to the screen of PP work and I can then work for a bit.
I noticed it doing when auto save a few times, but that might just be a coincidence.
This happens only on PP and no other program CC or any other software I've ever used besides... Premiere Pro only
And he would do with Premiere Pro 5 as well until I'm Cloud
Ideas?
Thank you!
Uncheck the monitor 1
Check the screen 2.
-
No Version control under the file Menu command
Version of program: Adobe RoboHelp 8.0.2 / RoboSource Control 3.1
Hello!
I am very experienced with authoring in RoboHelp, but I'm trying to implement the version control for the first time and documentation (PDF version of the manual using Adobe RoboHelp 8, page 29, point 2) says "Choose file > Version Control > add to Version Control.
I have not found a Version control on the file menu point, even if the menu was fully deployed.
I found a toolbar icon that seemed to link to the command.
It is not a big deal, because I could find the icon, but I have other problems with version control (which I will address in a separate post), and I wonder if there is something wrong with my software. Everyone has the "Version Control" command in the file menu?
Thank you!
Andreah
Hello
Sometimes it takes to reset a menu. To do this, right click on your menu bar and choose Customize. This should be the tab toolbars at the front. If this is not the case, click it. Then make sure the highlight is on the menu bar. Click on the reset button. Dismiss all dialogs. It shows then?
Here again, the Source code control is not my cup of witchcraft and I do not use it. So, I've never had a reason to pick up the order. Maybe it's just missing and the docs are wrong.
See you soon... Rick
Useful and practical links
Wish to RoboHelp form/Bug report form
Begin to learn RoboHelp HTML 7 or 8 days - $24.95!
Adobe Certified RoboHelp HTML Training
-
Failure to the final control of Oracle CRS stack. 10 on the first node.
Hello world
I tried to install a RAC Oracle 10 g on Oracle Enterprise Linux AS release 4 2 (October 7 update), but I'm having this problem
root@fporn01 crs #./root.sh
Check to see if Oracle CRS stack is already configured
Set the permissions on OCR backup directory
Setting up NS directories
Configuration of the Oracle Cluster registry upgraded successfully
clscfg: version Setup detected EXISTING 3.
clscfg: version 3 is 10 G Release 2.
Award of fporn01 default hostname for node 1.
Award of fporn02 default hostname for node 2.
Successfully accumulated necessary OCR keys.
Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
< nodenumber > node: nodename > < private interconnection name > < hostname >
node 1: fporn01 fporn01-priv fporn01
node 2: fporn02 fporn02-priv fporn02
clscfg: Arguments help you get success.
NO KEYS WERE WRITTEN. Power - setting force to override.
-force is destructive and will destroy any previous cluster
Configuration.
Oracle Cluster registry cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding to inittab demons
Expected CRS demons to be in place within 600 seconds.
Failure to the final control of Oracle CRS stack.
+ 10 +.
Forget the names!
but on the second node everything went well, so I don't know that this is not a connectivity problem.
the iptables service is stopped and disabled
check the results after you run the root.sh script
root@fporn02 ~ # /u01/app/crs/root.sh
Check to see if Oracle CRS stack is already configured
+ / etc/oracle does not exist. Create now. +
Set the permissions on OCR backup directory
Setting up NS directories
Configuration of the Oracle Cluster registry upgraded successfully
clscfg: version Setup detected EXISTING 3.
clscfg: version 3 is 10 G Release 2.
Award of fporn01 default hostname for node 1.
Award of fporn02 default hostname for node 2.
Successfully accumulated necessary OCR keys.
Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
< nodenumber > node: nodename > < private interconnection name > < hostname >
node 1: fporn01 fporn01-priv fporn01
node 2: fporn02 fporn02-priv fporn02
clscfg: Arguments help you get success.
NO KEYS WERE WRITTEN. Power - setting force to override.
-force is destructive and will destroy any previous cluster
Configuration.
Oracle Cluster registry cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding to inittab demons
Expected CRS demons to be in place within 600 seconds.
CSS is active on these nodes.
fporn02
CSS is not active on these nodes.
fporn01
Node local verification.
Run the root.sh on the remaining nodes script to start the demons of the CRS.
It is the newspaper of crs on the first node
root@fporn01 bin # cat /u01/app/crs/log/fporn01/alertfporn01.log
+ 17:27:37.695 + 2009-06-24
customer (9045) CRS-1006: / u02/oradata/orcl/OCRFile_mirror location of the OCR is inaccessible. Details in u01/app/crs/log/fporn01/client/ocrconfig_9045.log.
+ 17:27:37.741 + 2009-06-24
customer (9045) CRS-1001: OCR has been formatted using version 2.
+ 17:28:24.544 + 2009-06-24
customer (9092) CRS - APB - rac configured with nodes fporn01 fporn02 1801:Cluster.
It is the newspaper of crs on the second node
root@fporn02 ~ # cat /u01/app/crs/log/fporn02/alertfporn02.log
+ 18:09:09.307 + 2009-06-24
CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
+ 18:09:09.307 + 2009-06-24
CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile_mirror1. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
+ 18:09:09.310 + 2009-06-24
CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile_mirror2. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
+ 18:09:12.441 + 2009-06-24
CSSD (16991) CRS - 1601:CSSD complete Reconfiguration. Active nodes are fporn02.
I rechecked the remote access / user equivalence
After execution of the command here OCRCHECK have this information
root@fporn01 bin #. / ocrcheck
Status of the Oracle Cluster registry is:
Version: 2
Total space (in kilobytes): 262144
Used space (in kilobytes): 312
Amount of available space (KB): 261832
ID: 255880615
Device/file name: / u02/oradata/orcl/OCRFile
Verifying the integrity of file/device succeeded
Device/file name: / u02/oradata/orcl/OCRFile_mirror
Verifying the integrity of file/device succeeded
Checking cluster registry integrity succeeded
on the second node, I get the same result
root@fporn02 bin #. / ocrcheck
Status of the Oracle Cluster registry is:
Version: 2
Total space (in kilobytes): 262144
Used space (in kilobytes): 312
Amount of available space (KB): 261832
ID: 255880615
Device/file name: / u02/oradata/orcl/OCRFile
Verifying the integrity of file/device succeeded
Device/file name: / u02/oradata/orcl/OCRFile_mirror
Verifying the integrity of file/device succeeded
Checking cluster registry integrity succeeded
I have reviewed the following metalink notes, but none of them seem to solve my problem
* 344994.1*
* 240001.1*
* 725878.1*
* 329450.1*
* 734221.1*
I made a low of research from many forums, but failure is always on the second node, but my failure is on the first node.
I hope someone could help me.
It's the output of cluvfy
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node 'fporn01 '.
Accessible destination node?
------------------------------------ ------------------------
fporn01 Yes
fporn02 Yes
Result: Check accessibility node from node 'fporn01 '.
Verify the equivalence of the user...
Check: Equivalence of the user for the user 'oracle '.
Comment by node name
------------------------------------ ------------------------
fporn02 spent
fporn01 spent
Result: Use equivalence CONTROL passed to user 'oracle '.
Checking administrative privileges...
Check: Existence of user 'oracle '.
User name of node are comments
------------ ------------------------
fporn02 Yes
fporn01 Yes
Result: Use CONTROL existence increased for 'oracle '.
Check: Existence of group 'oinstall '.
Name of node status group ID
------------ ------------------------
fporn02 is 501
fporn01 is 501
Result: Check existence for "oinstall" group
Check: The user 'oracle' in group 'oinstall' primary members
Name of node user is group is user in the main group comment
---------------- ------------
fporn02 Yes Yes Yes Yes past
fporn01 Yes Yes Yes Yes past
Result: Membership check for user 'oracle' in group 'oinstall' as primary past.
Past check administrator privileges.
Verify node connectivity...
Interface of the node information to "fporn02".
IP address subnet of the interface name
------------------------------ ----------------
eth0 10.218.108.245 10.218.108.0
eth1 192.168.1.2 192.168.1.0
Interface of the node information to "fporn01".
IP address subnet of the interface name
------------------------------ ----------------
eth0 10.218.108.244 10.218.108.0
eth1 192.168.1.1 192.168.1.0
eth2 172.16.9.210 172.16.9.0
Check: Subnet node connectivity "10.218.108.0."
Source Destination connected?
------------------------------ ----------------
fporn02:eth0 fporn01:eth0 Yes
Result: Verification of node connectivity for subnet "10.218.108.0" with one or more nodes fporn02, fporn01.
Check: Subnet node connectivity "192.168.1.0.
Source Destination connected?
------------------------------ ----------------
fporn02:eth1 fporn01:eth1 Yes
Result: Verification of node connectivity for subnet "192.168.1.0" with one or more nodes fporn02, fporn01.
Check: Subnet node connectivity "172.16.9.0."
Result: Verification of node connectivity for subnet "172.16.9.0" with one or more nodes fporn01.
Interfaces adapted for private interconnection on the subnet "10.218.108.0":
fporn02 eth0:10.218.108.245
fporn01 eth0:10.218.108.244
Interfaces adapted for private interconnection on the subnet "192.168.1.0":
fporn02 eth1:192.168.1.2
fporn01 eth1:192.168.1.1
ERROR:
Could not find an appropriate interface for the VIP range.
Result: The node connectivity test failed.
Check the system requirements for 'Sir '...
Check: Total memory
Name of node available comment required
------------ ----------
fporn02 7,93 GB (8310276 KB) 512 MB (524288 k) transmitted
fporn01 7,93 GB (8310276 KB) 512 MB (524288 k) transmitted
Result: The total past memory check.
Check: Disk space in "/ tmp" dir
Name of node available comment required
------------ ----------
fporn02 9.57 GB (10037300 KB) 400 MB (409600 KB) transmitted
transmitted fporn01 GB 9.55 (10012168 KB) 400 MB (409600 KB)
Result: Check the free space on the disc passed.
Check: Swap space
Name of node available comment required
------------ ----------
fporn02 from 1 GB (1048576KB) of 8,81 GB (9240568KB)
fporn01 from 1 GB (1048576KB) of 8,81 GB (9240568KB)
Result: Checking space last Swap.
Control: System Architecture
Name of node available comment required
------------ ----------
fporn02 i686 i686 spent
fporn01 i686 i686 spent
Result: Audit had system architecture.
Control: Kernel Version
Name of node available comment required
------------ ----------
2.6.9 - 2.4.21 - 15EL spent 78.0.0.0.1.ELhugemem fporn02
2.6.9 - 2.4.21 - 15EL spent 78.0.0.0.1.ELhugemem fporn01
Result: Last kernel version control.
Check: Existence of package for 'do-3, 79 '.
Name of State comment node
------------------------------ ----------------
fporn02 make-3, 80 - 7.EL4 spent
fporn01 make-3, 80 - 7.EL4 spent
Result: Package checking for 'do-3, 79 '.
Check: Existence of package for ' binutils - 2.14.
Name of State comment node
------------------------------ ----------------
binutils - 2.15.92.0.2 - 25 fporn02 spent
binutils - 2.15.92.0.2 - 25 fporn01 spent
Result: Package checking for ' binutils - 2.14.
Check: Existence of package for "gcc - 3.2.
Name of State comment node
------------------------------ ----------------
fporn02 gcc - 3.4.6 - 10.0.1 spent
fporn01 gcc - 3.4.6 - 10.0.1 spent
Result: Package checking for "gcc - 3.2.
Check: Existence of package for ' glibc - 2.3.2 - 95.27.
Name of State comment node
------------------------------ ----------------
fporn02 glibc - 2.3.4 - 2.41 spent
fporn01 glibc - 2.3.4 - 2.41 spent
Result: Package checking for ' glibc - 2.3.2 - 95.27.
Check: Existence of package for "compat-db - 4.0.14 - 5.
Name of State comment node
------------------------------ ----------------
past fporn02 compat - 4.1.25 - DB9
past fporn01 compat - 4.1.25 - DB9
Result: Package checking for "compat-db - 4.0.14 - 5.
Check: Existence of package for "compat-gcc-7, 3 - 2.96.128.
Name of State comment node
------------------------------ ----------------
lack of fporn02 failed
lack of fporn01 failed
Result: Failure of the existence Package control for "compat-gcc-7, 3 - 2.96.128.
++ Check: package of existence "compat-gcc-c++ - 7.3 - 2.96.128" ++
Name of State comment node
------------------------------ ----------------
lack of fporn02 failed
lack of fporn01 failed
++ Result: failure of packet existence check for "compat-gcc-c++-7, 3 - 2.96.128. ++
++ Check: package of existence "compat-libstdc ++ - 7, 3 - 2.96.128" ++
Name of State comment node
------------------------------ ----------------
lack of fporn02 failed
lack of fporn01 failed
++ Result: failure of packet existence check for "compat-libstdc ++ - 7, 3 - 2.96.128. ++
++ Check: package of existence "compat-libstdc ++ - devel-7, 3 - 2.96.128" ++
Name of State comment node
------------------------------ ----------------
lack of fporn02 failed
lack of fporn01 failed
++ Result: failure of packet existence check for "compat-libstdc ++ - devel-7, 3 - 2.96.128. ++
Check: Existence of package for "openmotif - 2.2.3.
Name of State comment node
------------------------------ ----------------
openmotif - 2.2.3 - 10.2.el4 spent fporn02
openmotif - 2.2.3 - 10.2.el4 spent fporn01
Result: Package checking for "openmotif - 2.2.3.
Check: Existence of package for "setarch - 1.3 - 1.
Name of State comment node
------------------------------ ----------------
fporn02 setarch-1, 6-1 adopted
fporn01 setarch-1, 6-1 adopted
Result: Package checking for "setarch - 1.3 - 1.
Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------
fporn02 are past
fporn01 are past
Result: Check group existence for "dba".
Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------
fporn02 are past
fporn01 are past
Result: Check existence for "oinstall" group
Check: Existence of user "nobody".
Name of State comment node
------------ ------------------------
fporn02 are past
fporn01 are past
Result: Use existence CONTROL passed to "nobody".
Failure of the system requirements for 'Sir '.
Check prior to the installation of cluster service failed on all nodes.We thank you for your comments ;)
If you advise/etc/inittab file... don't ' forget to uncomment (that's run when the system starts)
#h1:35:respawn:/etc/init.d/init.evmd run > / dev/null 2 > & 1
fatal #h2:35:respawn:/etc/init.d/init.cssd > / dev/null 2 > & 1
#h3:35:respawn:/etc/init.d/init.crsd run > / dev/null 2 > & 1TO
H1:35:respawn:/etc/init.d/init.evmd run > / dev/null 2 > & 1
H2:35:respawn:/etc/init.d/init. Fatal CSSD > / dev/null 2 > & 1
H3:35:respawn:/etc/init.d/init.crsd run > / dev/null 2 > & 1By the way... Have fun and take advantage of Oracle RAC ;)
-
Hello
I'm reading pulses TTL of a generator of service using a meter. I apply a 1 kHz signal to the meter. Each time counter reads the pulses correctly in the first cycle of measure, but it lacks some counts in all subsequent cycles.
I use NEITHER 9181 cDAQ chassis and NI 9402 module with 2014 LabVIEW and NI Max 14.0.
My computer has the Windows 8.1 operating system.
Please find the VI joint and the front image after EXECUTION.
I also used the same VI with chassis USB cDAQ-9171 . Results have been improved, but the same problem persists.
What could be the reason for this, please guide.
Thank you!
B. Sharma
1. the loop time is defined by software and therefore won't be compatible.
2. you restart the meter patch between each iteration of loop - so that the task is restarted, it does not take samples. The new start is faster on the USB device from the device ethernet due to the latency of the lower bus, so that explains why the behavior is improved on the 9171 compared to the 9181.
Using method 2 meter would be a clever way (maybe too smart...) to implement which, according to me, you are looking:
This will configure a second counter (ctr0 is paired with ctr1, ctr2 is paried with ctr3) to generate a signal of a period known (time measurement). The meter is taken into account the number of external pulses during this period, and since we are because data in terms of 'Ticks', it will give you the number that occurred during the measurement time. This measure is repeated for the specified number of Cycles without software-timing or latency between cycles.
The appeal of reading will have a time-out value long enough to ensure that all cycles have completed (or you can query to see if the task is made first of all to give the user the option to cancel the measure).
Best regards
-
selection of the ring-control do not work. Cannot select any other item as the first item.
Dear programmers cvi,
I have some problems with a control ring in a panel of the CVI. the ring comprises several elements. No matter what I choose, the result will always be the first item. I can't select something else than the first (Recent not necessarily the default item).
When I redraws the Panel, it works for the next few days. but somday in built version (production-application) the selection of ring control no longer works. When I start the uir-file in the labwindows cvi gui editor, I can understand the problem. Even in mode 'exploit' I can't select other elements than the first.
When I convert the ring article in another ring (F11 key), and then convert back into the original it works again (1-2 days).
When the problem appears, the contents of the file is always the same!
I also redraw the Panel in different versions of labwindows cvi (2010/2012/2013), still the same problem.
another ring-control on different panels (many more controls) never come whith this effect.
all the guys there whith the same problem?
corrupted file IUR is in the annex.
Thank you!
Kind regards
Lukas roeder
Hi Lukas.
If you think the UI to be corrupted file, you can
-Save in a version different (e.g. 2013 instead of 2010) and see if that makes a difference
-Save it as a text TUI file and re - import (Options / Save in Text Format)
-
See also defects during the first seconds of startup (BIOS while in control of the system)
Hello. My Dell Latitude d 820 has started to show problems. The flaw of disp. most striking is when I start my laptop. I see groups of blue lines over control of the system BIOS. If the initialization is complete, I find my disabled graphics card. Another thing is that I get a blue or black screen like a dead end. The blue screen comes with three different erros. Perhaps the more understandable error msg is: the problem seems to be caused by ( lvl4-disp). Or theinfinite loop error msg. My video card is nvidia Quadro NVS 120 m. I use Win. XP. SP2 32-bit. what I've done so far is that:
I saw the net to enlighten me on this anomaly of display and the infinite loops and BSoD problems.
I updated the drivers of disp.
I formatted, used the system restore, cancel the restorations, xp used with the back of previous service.
I depended on the onley, ignored drivers VGA drivers Nvidia, ignored the automatic updates...
THE results are:
mistakes only temporarily disappeared and returned in the same way that they have used.
I can't understand the appearance of vulnerabilities display specific question as soon as the blue screen appears sudenly
NOTE: the battery is out of order for months now and I use the 90v power adapter to power my laptop.
the problem appeared all first some time after I put at the disposal of the battery.
HELP PLZ
THANX
Hi mohammad,.
Good to know my information has been useful. The steps you plan to take seems to help you refine the fear.
After return with any other questions about windows.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
is there anyway to remove it saying that parental controls have been turned on for a user account? is not defeat the purpose of putting them on in the first place?
is there anyway to remove it saying that parental controls have been turned on for a user account? is not defeat the purpose of putting them on in the first place?
Hello
Why she would frustrate the object?
If the child is a Standard recommended account and you are using an administrator account, the standard account cannot change Parental controls.
Concerning
-
In android, I would like to have control over the flow of the tools. I want users to rotate and crop everything first, before they don't embellish other stuffs.
You can get better help in a forum for the program that you are using
If you start the https://forums.adobe.com/welcome Forums Index
You will be able to select a forum for the specific Adobe products you use
Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll
-
spooler under app closed and lack all printers from the printer/control panel
have been authorized to issue and ms bound to my machine and hacked the directory and the fixed. It has not been long since I used the printer and found it doesn't work not today. tried the fix it program several times. shows the show and start spooler fixed, but it closes before the program ends even his control?
Thank you all!
Before I need to uninstall the many updates in the calendar that I lost control of the printer, another update must have solved the problem. All my printers are back and the printer works normally? guess that MS realized the problem and fixed it.
Thanks again!
-
Problem with the first pro effects controls
Hi, Merry Christmas;
I have a problem with the keys with the opacity effect in the effect controls panel. the following pictures I think make my problem more clear to understand:
The picture above shows that the opacity of the element of gopro correction control is 100% unless I drank too much champagne, or fully visible on the screen!
I want to do a transition effect showing the raft, which appear in the window of the following image, which is an Indian granary above the Colorado River.
My video of the attic I zoomed up to the window they give the impression that enter the attic when I arrive at the moment I start, with keyframes to have
inside of the attic without an opacity of 100% to 0% at the end of the clip attic. Unless the new champagne is very bad for my health and vision, I would then see the river
and the raft! Well I did not and it gives me nightmares! What is the problem? I add that having a zoom smooth and regular, I used the effect time remapping in the video for attic.
The clip of attic is just above the clip from gopro correction and he overlapped by the duration of the selected dissolution of the shown in the image below (I could of course use a resolution here, but I want to save money on an additional effect)
Here is the view with the screen and the opacity of the element of attic at 25%. Normally, the clip of the raft must be visible then! the orange-red to the right of the screen is inside wall of the attic!
Thanks for your suggestions... Claude
Sorry guys, I found the reason. My fade is too short! I had put 2 "to fade and seems not sufficient due to the element of the upper layer time remapping effect! Sorry for the inconvenience.
Claude
-
Right-click menu changed: used to be the first "Open link in a new window", "Open link in a new tab" second; in 4.0, the opposite is true. Can I customize 4.0 to switch back?
To change the order of these items, use the following:
You must update the following (your versions have known security problems):
- Shockwave Flash 10.2 r152
- Next-generation Java plug-in 1.6.0_22 for Mozilla browsers
- Check your plugin versions on one of the following links:
- http://www.Mozilla.com/en-us/pluginCheck/
- https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
- Note: plugin check page lacks information about all versions of the plugin
- Update the Flash plugin to the latest version.
- Download and SAVE to your desktop, so you can find the Setup program later
- If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
- Once the download is complete, exit Firefox
- Click on the installer, you just download and install
- Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
- Launch Firefox and recheck your version or up to the download link below to test the installation
- Download and information: http://www.adobe.com/software/flash/about/
- Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
- Use IE to go to the site above to update the ActiveX to IE
- Download manual installers.
- http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
- Note the separate links for:
- Plugin for Firefox and most other browsers
- ActiveX for IE
- Update the Java plugin to the latest version.
- Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
- Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
- Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
- See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
- Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
- Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
- Java test: http://www.java.com/en/download/help/testvm.xml
- Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
-
Apps of cloud crash all the time to gel since the first day after a few minutes of use
Apps of cloud crash all the time to gel since the first day after a few minutes of use.
Without the help of Adobe I tried to use the AdobeCreativeCloudCleanerTool.
In the user guide for AdobeCreativeCloudCleanerTool Adobe says contact us if there are errors in the log after you run this tool and guess what there are errors in the log file, but there is no way to contact the Support from Adobe and to get this other file for them. I've been a customer of creative cloud for months, and use that I got from her was ridiculously low all this lack of reliability. I really miss the days you installed only once a year and maybe fix something and then you were set for a year of cruise with your Adobe products. I am very disappointed, and unless Adobe can help I'll leave Adobe forever because there is no excuse to sell something that does not work and do not provide support at the same time. In a last-ditch attempt to get the resolution and since there is no other way for me to get this log file for Adobe I paste the contents of the log file of the AdobeCreativeCloudCleanerTool here in hope that some support and product engineer will do something about it. Here is the log:
[Mon May 02 18:39:09 2016] -.
[Mon May 02 18:39:09 2016] * = * = * = * = * = * = * = * = *: start Session: * = * = * = * = * = * = * = * = * = *.
[Mon May 02 18:39:09 2016] -.
[Mon May 02 18:39:09 2016] Win OS Version: 6.1
[Mon May 02 18:39:09 2016] The cleaner tool version: 2.0.0.0
[Mon May 02 18:39:09 2016] Source cleaning directory: C:\Program Files (x 86) \Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon May 02 18:39:09 2016] [AdobeProgramFiles]: C:\Program Files (x 86) \Adobe
[Mon May 02 18:39:09 2016] [AdobeProgramFiles_x64]: C:\Program Files\Adobe
[Mon May 02 18:39:09 2016] [AdobeCommon]: C:\Program Files (x 86) \Common Files\Adobe
[Mon May 02 18:39:09 2016] [AdobeCommon_x64]: C:\Program Files\Common Files\Adobe
[Mon May 02 18:39:09 2016] [UserRoamingAppData]: C:\Users\username\AppData\Roaming
[Mon May 02 18:39:09 2016] [UserLocalAppData]: C:\Users\username\AppData\Local
[Mon May 02 18:39:09 2016] [StartMenu]: C:\ProgramData\Microsoft\Windows\Start start\program
[Mon May 02 18:39:09 2016] [System32Folder]: C:\Windows\system32
[Mon May 02 18:39:09 2016] [SharedApplicationData]: C:\ProgramData
[Mon May 02 18:39:12 2016] Language selected: English
[Mon May 02 18:39:12 2016] View the Adobe end user license agreement
License agreement
By using software of Adobe Systems Incorporated or its subsidiaries ("Adobe"); You agree to the following terms and conditions. If you do not agree to these terms and conditions; do not use the software. The terms of an end-user license agreement accompanying a particular software file on the installation or downloading of the software take precedence over the below conditions.
The export and re-export of software products are controlled by the United States Export Administration Regulations and such Adobe software may not be exported or re-exported to Cuba; The Iran; The Iraq; The Libya; The North Korea; Sudan; or Syria or any country to which the United States embargoes goods. In addition; Software Adobe may not be distributed to persons on the Table of Denial Orders; the list of entities; or the list of specially designated nationals.
By downloading or using an Adobe software, you are certifying that you are not a national of Cuba; The Iran; The Iraq; The Libya; The North Korea; Sudan; or Syria or any country to which the United States embargoes goods and that you are not a person on the Table of Denial Orders; the list of entities; or the list of specially designated nationals.
If the software is designed for use with an application (the "Host" Application) software product published by Adobe; Adobe grants you a non-exclusive license to use this software with the host Application only; provided you have a valid license from Adobe for the host Application. Except as described below; This software is allowed to you to the terms and conditions of the Adobe end user license agreement governing your use of the host Application.
DISCLAIMER OF WARRANTY: YOU AGREE THAT ADOBE HAS MADE NO EXPRESS WARRANTY TO YOU REGARDING THE SOFTWARE AND THAT THE SOFTWARE IS SUPPLIED ' AS WHAT ' WITHOUT WARRANTY OF ANY KIND. ADOBE EXCLUDES ALL WARRANTIES RELATING TO THE SOFTWARE; EXPRESS OR IMPLIED; INCLUDING; WITHOUT LIMITATION; ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; MARKET VALUE; MERCHANTABILITY OR NON-VIOLATION OF THIRD PARTY RIGHTS. Some States or jurisdictions do not allow the exclusion of implied warranties; so the limitations above may not affect you.
LIMIT OF LIABILITY: IN NO CASE ADOBE WILL BE HELD RESPONSIBLE TO YOU FOR ANY LOSS OF USE; BUSINESS INTERRUPTION; OR PHYSICAL DAMAGE; INDIRECT; SPECIAL; ACCESSORY; ACCESSORIES OR INDIRECT OF ANY KIND (INCLUDING LOST PROFITS) REGARDLESS OF THE FORM OF THE CONTRACT ACTION. TORT (INCLUDING NEGLIGENCE); PRODUCT OF STRICT LIABILITY OR OTHERWISE; EVEN IF ADOBE HAS BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. Some States or jurisdictions do not allow the exclusion or limitation of incidental or indirect damage; If limitation or exclusion above may not apply to you.
[Mon May 02 18:39:12 2016] Please enter (y) for Yes or n for no.... > >
[Mon May 02 18:39:14 2016] Choose one of the following options to clean:
[Mon May 02 18:39:14 2016] 1 all
[Mon May 02 18:39:14 2016] 2 adobe Flash Player 10.2
[Mon May 02 18:39:14 2016] 3 creative Cloud 2015, 2014 creative cloud, cloud creative & CS6 products
[Mon May 02 18:39:14 2016] 4 creative Cloud 2015 only
[Mon May 02 18:39:14 2016] 5 creative Cloud 2014 only
[Mon May 02 18:39:14 2016] 6 creative cloud only
[Mon May 02 18:39:14 2016] 7 CS6 only
[Mon May 02 18:39:14 2016] 8 CS5 - CS5.5 - CS6
[Mon May 02 18:39:14 2016] 9 CS5 - CS5.5
[Mon May 02 18:39:14 2016] 10. CS3, CS4
[Mon May 02 18:39:14 2016] 11. Adobe Id credentials
[Mon May 02 18:39:14 2016] 12. Fix file host
[Mon May 02 18:39:14 2016] 13. Quit smoking
[Mon May 02 18:39:14 2016] Choice: >
[Mon May 02 18:39:55 2016] Selected by the user: all the
[Mon May 02 18:39:55 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\caps\pdb.db
[Mon May 02 18:39:55 2016] DB does not exist in: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db
[Mon May 02 18:39:55 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\caps\caps.db
[Mon May 02 18:39:55 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\caps\hdpim.db
[Mon May 02 18:39:55 2016] Orphaned session is deleted: adbeadbeadbeadbeadbeadbeadbeadb
[Mon May 02 18:39:55 2016]...
[Mon May 02 18:39:55 2016] Delete entries from the database of the installer
[Mon May 02 18:39:55 2016] Update status tsInstalled to 0 for the removal of 2 for installation in the ribs_collection_paylaod for adbeadbeadbeadbeadbeadbeadbeadb of the session table
[Mon May 02 18:39:55 2016] InstallState update
[Mon May 02 18:39:55 2016] Delete the contents of the product: AdobeColorVideoProfilesCS CS4, Version: 2.0
[Mon May 02 18:39:56 2016] ATTENTION: Payload with ID: {4F3CE025-D60B-4E6B-8D39-B04CD3769008} has no value InstallDir. Deleting the files from the patch (if applicable) cannot happen.
[Mon May 02 18:39:56 2016] Removing the features: {4F3CE025-D60B-4E6B-8D39-B04CD3769008} the ribs_payload table and other tables of the payloads Associates
[Mon May 02 18:39:56 2016] Delete the contents of the product: AdobeColorCommonSetRGB, Version: 2.0
[Mon May 02 18:39:56 2016] ATTENTION: Payload with ID: {AB8E4534-C573-4CC9-BA6A-76DD14055510} has no value InstallDir. Deleting the files from the patch (if applicable) cannot happen.
[Mon May 02 18:39:56 2016] Removing the features: {AB8E4534-C573-4CC9-BA6A-76DD14055510} the ribs_payload table and other tables of the payloads Associates
[Sun May 02 18:39:56 2016] finished the update to installState
[Mon May 02 18:39:56 2016] Deletion of session: adbeadbeadbeadbeadbeadbeadbeadb of ribs_collection and other associates of tables
[Mon May 02 18:39:56 2016] Update schema pcd_meta to 2 caps if the previous version is less than 2
[Mon May 02 18:39:56 2016]...
[Mon May 02 18:39:56 2016] Entries in the database of the installer have been removed
[Mon May 02 18:39:56 2016] Sessions folder will be deleted.
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:39:56 2016]
[Mon May 02 18:39:56 2016]
[Mon May 02 18:39:56 2016] HD database session is valid
[Mon May 02 18:39:56 2016] Inside the getHDProductIDsForWorkflow for CC15: 0
[Mon May 02 18:39:56 2016] Inside the getProductListHD for CC15: 0
[Mon May 02 18:39:56 2016] Returning from HD DB
[Mon May 02 18:39:56 2016] List of products installed on this computer
[Mon May 02 18:39:56 2016] List of products for cleaning:
[Mon May 02 18:39:56 2016] Please enter the number of the option of the product to remove; Enter (q) to exit... > >
[Mon May 02 18:40:28 2016] Are you sure you want to clean all the affected products and associated files?
[Mon May 02 18:40:28 2016] Type (y) to confirm and delete or (n) to quit smoking... > >
[Mon May 02 18:40:36 2016] Please wait for Adobe Creative Cloud tool cleaner finish...
[Mon May 02 18:40:36 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDAPP\pim.db
[Mon May 02 18:40:37 2016] AdobeApplicationManager (URIHandler) executable not found
[Sun May 02 18:40:37 2016]: cleaning-up flying over inventories:
[Mon May 02 18:40:37 2016] Inventory: ' AdobeApplicationManager-1, 0' Type: SelfUpdate, Action: NoDelete
[Mon May 02 18:40:37 2016] Inventory: 'uninstallts', Type: SIDES, Action: delete
[Mon May 02 18:40:37 2016] AAMref found: .aamref {AC76BA86-1033-FFFF-7760-0C0F074E4100}
[Mon May 02 18:40:37 2016] At least one inventory Non-cotes: false, at least an AAMRef: True
[Mon May 02 18:40:37 2016] Delete the contents of the product: CS5Installer, Version: CS5
[Mon May 02 18:40:37 2016] Deleting file: C:\Program Files (x 86) \Common Files\Adobe\caps\pdb.db
[Mon May 02 18:40:37 2016] There is no file: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] SAVED LOG FILE: C:\Users\username\AppData\Local\Temp\Adobe Creative cloud cleanser Tool.log
[Mon May 02 18:40:37 2016] Adobe Creative Cloud tool in cleaning completed successfully
[Mon May 02 18:40:37 2016]
[Mon May 02 18:40:37 2016] *-*-*-*-*-*-: START:-SUMMARY OF THE avertissements-*-*-*-*-*-*
[Mon May 02 18:39:55 2016] DB does not exist in: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] *-*-*-*-*-*-: END:-SUMMARY OF THE avertissements-*-*-*-*-*-*
[Mon May 02 18:40:37 2016] -.
[Mon May 02 18:40:37 2016] * = * = * = * = * = * = * = * = *: end of Session: * = * = * = * = * = * = * = * = * = * = *.
[Mon May 02 18:40:37 2016] -.
Hi Ludovic % 20Vignals,.
Thanks for sharing of log files, we would like to know the name of the Adobe software that appear in the menu "programs and features" after using the cleaning tool.
We would also like to know the version of the creative cloud that you try to install.
This is the tool that you can use to uninstall Cloud Creative: CC help | Uninstall the creative desktop application Cloud.
You get a message when creative cloud crashes? If so, please let us know of the possible screenshot.
Waiting for your response.
Thank you
-
Export lack contrast compared to the program monitor
First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.
Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.
I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.
- I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
- The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
- It isn't just Quicktime that has this issue, it is in all areas.
Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...
Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.
Thanks in advance for any idea on this issue.
After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.
It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.
I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input
I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...
-
Problem with white - style commentary on the first line of the select statement.
SQL * more error? :
It seems that the parser does not like "-" at the end of the first line of the request.
I see this error "ORA-00936: lack of expression" or "ORA-00933: not correctly completed SQL command.
SQL * Plus costs number not the 2nd line when I do that.
If a space follows-, '-', I still get the error.
a single "-" at the end of the line is ignored and the query works
But, "-." will not get the error.
I think that I had this problem before on the inside in the middle of a procedure from PL/SQL package.
--
It is of course easy to avoid. Is this just a quirk or am I missing something?
-----
SQL * more: 9.0.1.4.0 output
Oracle Database 10 g Enterprise Edition release 10.2.0.3.0
---------------------------------------------- -- These provoke an error ---------------------------------------------- SQL select 'a' -- from dual; select 'a' - from dual * ERROR at line 1: ORA-00936: missing expression /* the -- is "-- " */ SQL select 'a','b','c' -- from dual; select 'a','b','c' - from dual * ERROR at line 1: ORA-00936: missing expression SQL select -- select 'a' from dual -- ; select - select 'a' from dual - * ERROR at line 1: ORA-00936: missing expression SQL select 'a' from dual -- ; select 'a' from dual - * ERROR at line 1: ORA-00933: SQL command not properly ended ---------------------------------------------- -- These are OK ---------------------------------------------- SQL select 'a' --. 2 from dual; ' - a Elapsed: 00:00:00.00 SQL select 2 'a' -- 3 from dual; ' - a ------- a single "-" at the end of the line is ignored, query works SQL select 'a' from dual - ; ' - a SQLActually, it's in the docs, but we rarely know.
>
Continuing a long SQL More control on additional lines *.
You can continue a long SQL * more command by typing a hyphen at the end of the line and press return. If you want, you can type a space before you type the hyphen. SQL * Plus displays a right angle (>) support as a prompt for each additional line (not in iSQL * more).For example:
SALARY $99 999 COLUMN FORMAT-
SECTION "WAGES."
Since SQL * Plus identifies the hyphen as a continuation character, entering a hyphen in a statement SQL is ignored by SQL * more. SQL * more does not identify the declaration as a SQL statement until after the treatment of entry has joined lines together and removed the hyphen. For example, enter the following:SELECT - 200
100 DOUBLE;
Returns the error:>
It only happens for the first line of a sql statement, because at that time there you are not in the edit buffer. And the order could still be a sql * more order and not a sql command.
Published by: Sven w. on August 7, 2009 16:51
Maybe you are looking for
-
How to fix an error page not found 404 http error using Safari?
I constantly get the error message 404 http on a site online! need help... I have deleted cookies by the suggestion of online customer service, restarted, etc. Still does not work
-
Drag-and-drop files from a PDA
Hello I have a test tool automated radio (PCMCIA card) on a PDA at work (a DELL Axim). This benchmark to generate HTML reports. I have no the ability to control the PCMCIA device because I can't program under Windows CE and the manufacturer of test b
-
implement the officejet 4500 to print documents from my ipad
How do I configure my Officejet 4500 wireless to print documents from my Ipad?
-
Desktop calendar printing go wild
My system has been stable for a while: Tungsten E2 with Garnet 5.4.7, Palm Desktop 6.2.2 Win7Pro, BlueTooth for HotSynching, Canon MX860 all-in-one printer. Each month, I print the calendar (sorry, I mean Agenda) for the current and next month, in f
-
Hello Basically, I created a folder last year which was a music folder and it was empty when I removed it. But its been a year about this folder is on my desk. I continue to delete, but it doesn't on my desk every day. For example he discusses all th