'Lack of installation files' then install LabVIEW 2014 (Win7-64 on a VMWare system)

Similar Questions

• Volume License Installer does not select LabVIEW 2014 must be installed

  After you create an installer of LabVIEW 2014 at 3.1 VLM volume license, I ran into a strange behavior in the installer:

  Even if I chose to ignore all the stuff of LabWindows and don't understand that LabVIEW 2014 and additional modules that we have a license for when I created the installer - the installer itself, by operating, only LabWindows-substance previously chosen for the installation, when you get to the part of the selection of modules... All the parts that were actually included in the Installer are unselected (!).

  I always try to rebuild anywhere Installer, but maybe this is a known problem or has a solution (I guess I can modify some files in the installer to tell him which parties should choose by default, it is not dynamically linked to the license is available on the server now, so that the installer should detect that we indeed have a licens LabVIEW 2014 and so select it for installation?).

  Looks like the license was not quite ready for 2014, even though his name was declared 2014... got a new OR and it works very well.

• install LabVIEW 2014 not to find the disk drivers

  I downloaded 3014 LabVkew and NIDevicesDrivers Aug13.  LabVIEW installed fine on my Windows 7 64-bit system, but it gives me an error that the drivers folder that I select does not contain the correct volume.  I tried device drivers folder NOR, Aug13 folder, the folder produced, none have been recognized as valid.

  Anyone know the trick to get the device drivers loaded?

  The last download is August 2014.

  http://www.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:, n8:4.9547.9548, ssnav:...

• Run the exe file without installing labview

  I created my labview in exe file. I need to run this exe file on another computer that have no application in labview. It is afficherapres when I try to run it. What should I do without installing labview application in another computer?

  
  

• java plugin requires java installation, but the installation of java, "jxpinstall", failed. How can I fix this so that it installs and then install the plugin?

  I have a xp system.

  Could you please click the Firefox button, go to add-ons, then Plugins and disable the ActiveX of Yahoo plugin.

  Then close Firefox and restart again.

  Link http://www.java.com/en/ installs the Java plugin.

• Cannot install Datalogging and supervisory 2014 control with labview 2014 64-bit Module

  Community salvation OR

  I installed labview 2014 64 bits, then I tried to install Datalogging and supervisory Control Module 2014

  http://www.NI.com/download/LabVIEW-datalogging-and-supervisory-control-module-2014/4848/en/

  but a display of error messages "labview 2014 must be installed. What I have to install labview 2014 32 bit, is there another solution

  In addition to morem, try installing real-time 2014

  http://www.NI.com/download/LabVIEW-Real-time-module-2014/4832/en/

  an error message display "labview 2014 32 bits must be installed". is there any version for 2014 lv 64-bit

  Thank you

  The compatibility matrix is here.

  You must install LabVIEW 32bits.

  You have a specific need for 64-bit LabVIEW?

• LabVIEW 2014 SP1, hardware and real-time PXI

  I'm doing my third LabVIEW Wipe/reinstall in as many days, completely frustrated (and after several calls an hour with the support of NEITHER).  Here's the situation:

  I wrote a fairly large (1000 VI) project of Acquisition/control of our graduate students data used for behavioral experiment on sound localization.  It was developed in 2012 LabVIEW with the module running on a PC/PXI system real time.  It worked very well and was brought successfully under LabVIEW 2014 (with upgrades comparable to the software of the PXI.

  About 18 months ago the students began to write their theses, and at one point stopped gathering data.  Also, at some point, I upgraded the software on this system to LabVIEW 2014 SP1, but I am not sure that I never tested my software with this new system.

  This week, I pulled up the system to use MAX to open some test on the PXI multifunction and DIO card panels to control manually one of the stimuli.  I discovered that MAX could not communicate with the advice on the PXI system - he attributes them as devices VISA, indicating each Board with an icon with a red X means that he could not communicate with the IP that I had assigned to PXI.  Yet, MAX (a) could "discover" this PXI, (b) MAX can 'see' its IP address, and (c) Windows could not only Ping the IP, but could FTP on the drive of the PXI and I could move files back and forth.

  I did two sequences complete "Wipe/reinstall" using LabVIEW 2014 SP1, all giving the same result.  I know it has worked in the past, including when I installed LabVIEW 2014 (without SP1), something I repeat myself now with my third installation.  I discussed with OR (thin?) possibility that there is a "hidden defect" in the Distribution of the SP1, one that is visible to LabVIEW RT users using PXI hardware and go unnoticed because (a) install a few sites of LabVIEW versions SP1, (b) a minority use the RT Modules and (c) PXI is "old material".

  If anyone has such a system or saw a similar problem, please answer.  I'll do a follow-up post if I managed to 'fix' my system by this last reinstallation "a solution of worked before."

  Bob Schor

  Well, the answer is that, in my system, LabVIEW 2014 SP1 with LabVIEW Real-time connected to a PXI system does not appear to connect to boards plugged into the chassis.  Returning to LabVIEW 2014 (fall release), installed in exactly in the same way that the three failed attempts of LabVIEW 2014 SP1, works immediately.  Engineers OR will try to duplicate/verify/possibly patch? in this issue.

  Bob Schor

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• Installation of LabView 2014 on Mac

  I try to install LabView on my MacBookPro on OS X 10.10.3 using the license of my University. Download page of the University has a list of the files that I could download: disc 01 - Core Software (Windows) disk 02 - Core Software (Windows) disk 03 - Core Software (Windows) disk 04 - Core Software (Windows) disk 05 - Module FPGA, Xilinx additional Compilation disc 06 - LabVIEW Professional Edition Tools (MacOS 10.7.0 or later / Linux) disk 07 - device drivers OR so I downloaded disk 6 , which was a file named lv-spring-2014 - d6.iso and mounted. The mounted image is named 2013FPGAXILINX. It contains folders 'Linux' and 'Windows', which seem to have install files for FPGA compile worker. Is there an installer for LabView Mac. It seems that my University could have mixed with the disc/labelling order and what I downloaded is actually disc 5. Should I try to download the other disks and see if they have the installer Mac - but that would take ages? How should I proceed?

  When I worked for a University and had similar problems, I ended up calling the boss of the person responsible for the management of software and the physical disk Moose should be directed to me.  They could never get it directly online.

  Your idea to download other disks may be the fastest thing to try. You probably have enough bandwidth that you can download all Gladden of disks that you cannot understand who the responsible person (ir).

  Good luck!

  Lynn

• I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find that it has Photoshop on

  I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."

  Download the files to install cs4 design premium and install ps to use them,

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to develop the final application exe file that will work on PC not installed labview

  Hello

  I developed a labview application (I request manufacturers/builders and professional license).

  I generate the final exe file by the tools of-> built Application exe of VI-> fact file

  But this the application exe file runs only on machines installed labview. His works do not on the other PC.

  For the execution of the other PC I have to do.

  Hello Ramji,

  As you said, EXE is created by you and its nning ruou fine on the PC where you created such as LabVIEW is present there.

  So for LV CE, please create an installer and Add Installer/additional software required by your EXE.

  Look at the link for reference.

  http://www.NI.com/white-paper/5406/en

  Kind regards

  Leila

  CLD

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• Receive error message when you install Windows 7 "Windows Setup cannot find a location to store temporary installation files.

  * original title - Windows Setup is unable to find a place to store temporary installation files. To install the winds make a partition on your startup disk has at least 686 MB free space *.

  Current operating system: Windows XP SP 3

  Windows 7:32 - bit Premimum Family Pack upgrade

  Hardware: Dell dimension 3000

  I read a number of different solutions for this problem.  None have worked.  I have 25 GB of free space on my C drive.  I formatted a dvd using the tool to download Windows 7 USB DVD.

  I ran sfc/scannow to repair system files

  I ran the suggestion to start installing from a command using D:/setup.exe /tempdrive:c window - it did not work.

  Does anyone have any other suggestions on how to perform this upgrade?

  Try these suggestions:

  Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade.  You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

  BTW, for your references, I found similar questions:

  Windows could not create a required installation folder. Error code: 0x80070005
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

  "Cannot create file" error when you try to install Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

  Error 0 x 80070005 when upgrading to windows 7 from vista
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

  CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP