BlackBerry Application descriptor error!

Similar Questions

• BlackBerry World: "application setup error".

  I made a simple program called "Custom dice. When I launch from the NDK BlackBerry on my Dev Alpha, it works fine. However, when I try to install my application on BlackBerry World, I get this rather vague error message: "application setup error". Is attached a screenshot of this error. I have absolutely no idea what could cause this error. Someone has any advice how to solve this problem, what I could do to find the cause of this error? Thank you!

  I can confirm that the application now installs fine. What gives some help apparently contributed time

• error in updating the BlackBerry application

  Portal provider gives me an error, when I try to download the new version of the blackberry application. Please see the full error message given below.

  ("BAR file ('GacDirectory - 1_0_0_4.bar)") was rejected. The BAR ("gYABgJ0Jom3WzADM0b1yBmjVa20") package ID does not match ID of the application ("gYABgIm1QEDmkg7Fk2PIbALvRcA") Package. »

  little research, I just understand that my song of code blackberry key is different from the old as well as certificate of author. application support native blackberry API level 10.1 +.

  These old code signing key and certificate are no longer available and development environment (computer) has also been changed.

  However, I have access to the supplier portal and I can generate the new file bbid (csk). I am in a terrible situation, help me please update the new version of the application.

  Application name: GacDirectory

  Vendor ID: 36071891

  If you have more code access keys to sign your signature request, you can contact the BlackBerry World of the vendor management support to clear the flag of your application ID, allowing you to update your application.  However, note that if you do this your upgrade of the application appears as a new separate downloading BlackBerry World application.

• "Manifesto of the error: Invalid application descriptor or"

  Hai guys

  l have problem, when l has create download link cod and jad, and when l try to download "Error Invalid manifest or application descriptor" the "MIDLET-Version 'attribute is not a valid version number."

  all guys the solution?

  Thank you

  OnAir

  Hai Jhon

  It works now and thanks for your help

  Thank you

  OnAir

• Error: Invalid manifest or application descriptor

  Hey,.

  I have problems to install an OTA application.  I get the error message:

  Error: Invalid manifest or application descriptor

  The 'MIDlet-Version' attribute is not a valid version number.

  This is the JAD file:

  Manifest-Version: 1.0
  MIDlet-Version: 1.0
  MIDlet-Jar-Size: 110544
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Jar-URL: AppName.jar
  RIM-COD-Module-dependencies: net_rim_cldc, net_rim_bbapi_invoke, net_rim_bbapi_menuitem, net_rim_bb_framework_api
  RIM-MIDlet-flags-2: 0
  RIM-MIDlet-flags-1: 3
  RIM-COD-Module-name: AppName
  RIM-COD-size: 48912
  MIDlet-name: AppName
  RIM-COD-creation-Time: 1282082618
  MIDlet-2: AppName, gui
  MIDlet-1: AppName,resources/icons/icon-27x27.png,background
  RIM-COD-URL: AppName.cod
  MIDlet-Description:
  RIM-COD-SHA1: 3 b 89 bb d6 3 c 1f a0 52 b3 19 96 7B 7th 8F 56 cf 15 2d af 4 c
  Microedition-profile: MIDP-2. 0

  Can we see something wrong with that?  Also, do you know how easly test installation OTA?  I don't have a url to download from, it is from a paid site and they don't seem to have a way to test the installation of the OTA.

  EDIT

  I figured out how to test the OTA installation but I always encounter the same error.  I have another point of entry, don't know if that matters.  The version number allows you to v1.0 but I changed because I thought the v could be the cause of the issue but still no luck.

  Thank you.

  I thought about it, I think it was the version in my other entry point is inccorect too.  If anyone runs into this problem make sure your version number is as so:

  Major.Minor [.] Micro] (X.X [.]) X])

  Where the number of microphone can be omitted for example:

  1.1.0
  11.1.0
  1.11.1.
  etc.

  Make sure that there are only numbers and. in it also.  Here's a good link:

  http://developers.Sun.com/mobility/MIDP/questions/version/index.html

  Also, try to remove the .jad files and cod.  I kept problems where it is not up-to-date.  I had to remove and re - building several times before that has worked.  Hope that someone else who saves the trouble that I have lived.

• Air App for Android - error 301: application descriptor missing

  Greetings!

  Have built in Flash for a while, I am brand new to mobile development.  I am currently creating my first app Android, a very simple game called '302 saves the Galaxy '. I don't intend to sell the game.  I'm really just trying to learn my way through the process of publishing for future projects.

  I was able to get to the last step in creating the apk file and I get this error in the command line process-

  "Error 301: Application descriptor missing/cannot be opened.

  Here is a screenshot of the window from command line-

  

  Here are some other details on my process-

  • In Flash, I chose to publish to Air 2.0, because it's the only option I had (IE, no Air 2.5 option)
  • I checked three times and all spellings seem to be correct in my command line syntax

  I don't know I'm missing something here obvoius.  Any suggestions?

  Thanks in advance!

  Joel

  Hi Joel,

  Command, xml application should precede the swf.

  -Pahup

• Flex Builder error: Namespace 2.6 in the application descriptor file must be equal to or greater than the minimum version 3.1 required by Flex SDK.

  "2.6 Namespace in the application descriptor file must be equal to or greater than the minimum version 3.1 required by the Flex SDK kit."

  what it means?

  to run the application

  (1) I need lower version 3.1

  (2) I need a newer version than the 3.1

  I'm confused.

  You can change the project xml file. I solved like this.

  

• Namespace 0,0 in the application descriptor file must be equal to or greater than the minimum version 3.1

  Hello everyone

  I followed the link to create app Hello world for the playbook using Flashbuilder 4.6.

  https://developer.BlackBerry.com/air/documentation/ww_air_getting_started/Create_your_first_applicat...

  and I get the following error

  Namespace 0,0 in the application descriptor file must be equal to or greater than the minimum version 3.1 required by Flex SDK. AirHelloWorld-app.xml/AirHelloWorld/srcUnknownAIR application.xml problem.

  Any ideas or suggestions?

  Thank you

  I solved this problem.

  A PC restrated it is resolved.

  Thank you

• Unknown USB device (device application descriptor failed) Code 43

  my internal cam has stopped working, I worked on almost everything what I found in the internet

  disabled drivers and restarted

  uninstalled the usb ports on the Device Manager and rebooted again

  I get this error message in the Manager of devic

  name:

  Unknown USB device (device application descriptor has failed)

  Device status

  Windows has stopped this device because it has reported problems. (Code 43)

  A request for the USB device descriptor has failed.

  Geographical area:

  Port_ #0001.Hub_ #0004

  Status:

  Device USB\VID_0000 & PID_0002\6 & e2f2cee & 0 & 1 had a problem starting.

  Driver name: usb.inf
  The class GUID: {36fc9e60-c465-11cf-8056-444553540000}
  Service:
  Lower filters:
  Upper filters:
  Problem: 0x2B
  Status: 0x0

  Hi waly,.

  Thank you for the information. I suggest that you unplug all USB connections and refresh your laptop. Then try to use your webcam. I think that the problem with the USB connection that gives you the error and not your webcam. Here is a document on how to update your PC to solve problems (Windows 8).

  If you are still experiencing a problem with the webcam and then one of the documents in the previous post should help now. Any stage of document Windows 8 will be the same for Windows 8.1.

  I'm also including this document how trouble Code 43 errors that will help determine which USB product causes the error to appear.

  I hope that this information help, please let me know how it goes.

  Good luck and have a great day!

• Extremely confused with the extremely complicated presentation of BlackBerry applications

  Please help me, I'm very confused with the extremely complicated presentation of BlackBerry applications.

  I made an app, the name is "App", I got signed and downloaded the App using the emulator Ripple, with the word 'HelloWorld' signature (password not true of course).

  Now, I do another application, with the name of the App (B) I CAN'T use the same HelloWorld signature password because the emulator Ripple said "Oh, Snap!" Build request failed with the message: [ERROR] error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again. »

  Now, I don't understand and I am EXTREMELY confused with the presentation of the model of application for Blackberry.

  I should first request, for an another RDK and COMINCO files create a new signature for App B password?

  Or should I just increment the bundle version? the problem is when I tried it on Blackberry server seems to give narrations of error message that the APP ID is already used.

  Okay, I'm officially stuck and I don't know what to do. Can any developer of blackberry here or the official employee blackberry tells me what I need to do?

  Thank you.

  I do not use ripple either but can see what the problem is (nothing to do with the ripple)

  Open your file config.xml for the new project (probably copied 'App A'?)

  In the widget section, change the id to something different, for example com.example.AppB

  Save - reload the ripple and make sure you have the new ID in the Config-> Widget

  All sorted

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• BlackBerry Smartphones BlackBerry Bold 9700 error 507

  I was updating my blackberry put new software on it and while it was going on my computer stopped mac and the 507 error came to my phone. I tried reaconecting of blackberry desktop software to repair. but as he begins to repair it not to do it, he says that he can't do. I need help ASAP please

  Hi Shawn_virk

  Welcome to the Forums of the BlackBerry Support

  Error 507 means that there is no OS on your device, follow this Knowledge Base to load the software on your device:

   KB19915 : perform a clean reload of software applications smartphone BlackBerry using BlackBerry Desktop Software on a Mac computer.

• TTIMDB connection problems: cannot resolve a non optional application descriptor property [DSN]

  Hello

  We currently have the plugin TTIMDB 11 g deployed in our instance of EM10g without a problem and you want to migrate to 12 c.  Us have deployed/installed the 12.1.0.2.0 plugin in our instance of EM12c and it deployed to the agent of the 12cR3 on our dev TTIMDB server.

  When you add the target TTIMDB in the same way that it is deployed in 10g, fine tested connecting to the DB, however the target shows down with the following errors...

  1. supervised > all measures, we get this... "The TimesTen database is declining: [name of the source/db data] is not loaded '

  2. under the target Configuration > Monithat test us the connection and if Configuration connection test when fTSRI Configure the plugin has worked it is now failing... "
  Response; Cannot resolve a non optional application descriptor property [DSN] (DSN).

  
  

  Any thoughts on what may cause these errors?

  
  

  Thank you

  Steve

  
  
  

  Hi Steve,.

  We are talking about the same thing. When I check to see if the TimesTen database is loaded into memory, I mean make sure that the database is running.

  By default, a TimesTen database is loaded into memory (start) during the first connection to the database. When the last connection to database stops, it will automatically unload the database of memory (close).

  As it is recommended to change this database startup behavior by manually changing the setting of strategy of the RAM .

  That is right I've proposed a ttIsql to connect to the database during the EM test. This will ensure that the target database is in place and running, so EM can connect to it.

  If you can stay connected to the database target using ttIsql and EM reports again that the database is down, then Yes, there is another problem.

  I suggest recreating the target and try again.

  Simon

• 2.6 Namespace in the application descriptor file must be equal to or greater than the minimum version

  I imported a project mobile fb fb4.6, but this error:

  2.6 Namespace in the application descriptor file must be equal to or greater than the minimum version 3.1 required by Flex SDK.

  Is there a quick fix for this?

  you need to replace http://ns.adobe.com/air/application/2.6 "> to http://ns.adobe.com/air/application/3.1" > inside *-app.xml file. ""

• Why open links in Firefox causes a "Server error in ' / ' Application Runtime Error" but not in "Internet Explorer"?

  When I click on certain links in an e-mail message (and Firefox is the default browser), I get the following error:

  In the Application Server error ' / '.

  Runtime error
  Description: An exception occurred while processing your request. In addition, another exception occurred during the execution of the custom for the first exception error page. The request was interrupted.

  If, however, I follow the same links (and Internet Explorer is the default browser), I get no error and the good content of the link is displayed.

  What is causing this error? As I prefer Firefox, how can this problem be fixed?

  Windows 7 Service Pack 1 operating system
  Firefox Version 32.0.1
  Internet Explorer Version 11.0.9600.17280

  Thank you for your help.

  First

  When you look at the address in the address bar, it seems to coincide with the e-mail?

  It seems that Firefox has sent the server something it was not expected. Sometimes this can be caused by obsolete or damaged cookies - assuming that you have visited the site before. It could also result in changes of standard information sent to servers such as the string 'user agent' that specifies your version of browser and operating system.

  To clear cookies for a site, while displaying a page on the site, either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.

  Then try to reload the page. Who help me?