Satellite A80 129 usb mouse problem

Similar Questions

• Problem of its satellite A80 129

  I bought the laptop Satellite A80-129 a few days ago. I decided to install Win XP Prof instead of Win XP Home, which came with the laptop. After installing all kinds of software, I noticed something weird. His knowledge was quite low.

  I checked all kinds of possible parameters of volume everywhere and it is set to max everywhere possible. Also, I checked the volume on the laptop dial and it is also turned to MAX I installed WM Player 10, RealPlayer, Quicktime and Winamp 5.08.

  After playing some of my music, I came across something interesting. While I was playing my music in Winamp, I also played a small video file in WM Player 10 and that's sound was really loud. Immediately I looked at which audio codec is used in this video and this is WMA 9 (64 kbit/s, 48 kHz stereo, (A / V) 1-pass CBR). When I stop the playback of this video, sound volume decreases again.

  I also tried sound in other software such as RealPlayer and Quicktime, and only after I read this audio video gets really strong in all players. Any suggestions?

  I would point out also that no matter if I play music (mp3, wav, audio CD..) or video (avi, mpeg, rm,...), audio is still low. Only after that I have play this specific video, the sound becomes strong to all players, playing music or video.

  I also have problems with energy saver. If I install it, everything I write in the world is so slow, it appears letter-by-letter although I already wrote the entire sentence. If I uninstall, then everything is back to normal. Why is this happening?

  I would really appreciate a response.

  Best regards, Kekec

  Hi Kekec

  It's very strange because that all tools & utilities should work fine using Windows XP Home and Professional. Have you had all of these problems at the beginning with OS preinstalled by Toshiba? The original operating system provided by Toshiba included SP2. Have you installed it too?

• Module Bluetooth for Satellite A80 129

  Hi all!

  Is it possible to upgrade my satellite A80-129 with a BT module or it is not possible at all?

  And if possible, what then is the right one for my laptop?

  BR, Kekec

  Hi kekec

  I found information that Bluetooth for A80 is not available. This means that there is no possibility of upgrade. In this case, the best advice is USB Bluetooth stick.

• Where can I find repair for Satellite A80 129?

  I want to find the service manual for the model satellite a80 129 because my screen is a little loosy.

  Hello

  In general, manual service Toshiba is not available for end users. Maybe you can find help on the net, but if you n t with experience, it will be best to contact a qualified staff in some laptop repair center.

• Satellite A80 129 No. wirless and Bluetooth internet

  Hi guys,.

  I have a laptop Toshiba I formatted yesterday is Satellite A80-129.
  After some googling I found the way to get the drivers for it, but those driver links two do not seem to work.

  Bluetooth stack
  Toshiba OS independent NA World Wide
  http://Support1.toshiba-tro.de/Tedd-files2/0/bltstk-20070724121132.html
  Wireless Lan driver
  Intel Windows XP s/o world wide
  http://Support1.toshiba-tro.de/Tedd-files2/0/wlesslan-20070716135646.html

  Please help me get my WiFi and bluetooth
  I really need to use it.

  THX

  Hello

  The laptop does NOT have Bluetooth!
  That's why you can not install the BT stack!

  Regarding the WiFi network:
  I'm not quite sure what you have but here the map Intel WLan is a beautiful m document how to find the right driver:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• Satellite A100-062 - USB mouse does not work

  Hello

  I have a Satellite A100-062.

  I've never been able to get a USB mouse to work with her.
  The OS is Vista Home Premium, whenever I have plug in a USB mouse, the operating system detects a device has been connected to the USB port, but eventually the message material has not installed successfully.

  So I have to rely on the touchpad, the problem seems to be limited to mice only, I've successfully used a USB webcam without incident.
  I tried several USB mouse with the machine exclude a problem with my original mouse.

  Has anyone else had similar problems?

  Thank you

  > So I have to rely on the touchpad, the problem seems to be limited to the mouse only, I have successfully used a USB webcam without incident.
  Looks like a problem with the USB mouse and not with the laptop or with USB ports
  I would recommend testing different mouse and using the other.

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• Satellite C660-28V - USB hub problem

  Hello

  1st of all I'm not at all English-speaking countries so forget all accidental that confuses a may (and I will approve me) write down.

  So, how do I write about this threat, I have problem with my usb hub that I try to explain what exactly past in my book but the 1st I have satellite model n. c660-28v part No. psc1ge-03j008cz running win7/64 and on Toshiba support article for this specific book cant find any generic hub driver usb or any driver related to USB in all the

  Some about 2 months I reinstall my OS not with recovery, but with clean OS and I have the problem since.
  Since then im not able to find or fix this something driver works but not all... some external drives, flash, mouse, keyboards readers work at all before re-installing everything works fine.

  Its not so bad, but sometimes it drives me crazy, especially in times when im in a situation of time when I have no time for disorders like that readers

  Book always telling me that I have the latest drivers even after uninstalling and rebooting.
  If this is not enough given just ask

  Thx for advice or support that u can give me

  Suzeline

  Hello

  I ve checked specification for your laptop and I can see your laptop was initially offered with Win7 64 bit so I do not understand why you do not use this original version.
  You can install the original recovery image and optimize it to your needs.

  OK, you may want to have the Ultimate version and your own installation of operating system should not be a problem because all the necessary drivers, tools and utilities that you can download drivers Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Of course, that we know not what you have installed and how it looks like when you open Device Manager. All hardware installed and registered correctly?

  In any case, I can say, is that all the drivers for Win7 64 bit, tools and utilities are available, and you must install all the.
  The right installation order is as follows:
  Windows 7 64 bit
  TOSHIBA Assist
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Flash Cards Support utility
  TOSHIBA Value Added Package
  Realtek LAN Driver
  Synaptics Touch Pad Driver
  Realtek card reader
  Bluetooth Stack for Windows by Toshiba
  Wireless LAN driver
  ConfigFree
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  TOSHIBA HDD_SSD alert
  TOSHIBA Service Station
  TOSHIBA Disc Creator
  TOSHIBA Media Controller
  TOSHIBA Media Controller Plug - in1.0.5.11
  TosVolRegulator_x64_1.1

• Satellite T110-107 - Touchpad / mouse problem

  Just had delivery of a new Tosh T110-107, I have to say is beautiful, however a problem. A startup the touchpad works ok, but as soon as I plug the mouse USB may not work - what makes the system unusable until I disconnects me restart and the mouse. So what have I so done for her?

  Uninstalled McAfee and Norton 360 addded and office (two originals) and that's the problem were found until everything has been done - as he came out of the box.

  Win7 Home Premium, never had any problems with Win7, but then not used on a particular laptop model. Can only imagine its software/config but straight out of the box? Tosh must know there is a problem-they have too, but sold it?

  Does anyone else have this problem?

  Answer to Ah my own question, mouse at fault, as soon as the wheel is moved all the works, but we must constantly move or it don't work. It turns out that the mouse was not part of the package, so apologies to Toshiba, but then, that's why I had to buy this machine of large model - deemed manufacturer - if and I would recommend it to anyone who is thinking about buying one.

• OptiPlex BIOS 990 - keyboard and usb mouse problem

  Hello

  During the start my keyboard works how USB is quite limited - only early work on a button, then more nothing so far in reconnecting the keyboard. This means that to access the BIOS, I have to press F12, unplug the keyboard, plug it in again, push, plug the keyboard, press down, reconnect the keyboard etc.

  When I'm in the BIOS, it's the same thing. Mouse USB in the BIOS does not at all, I see no cursor. In Windows and Linux, all usb devices work correctly. I'm starting in legacy mode.

  I disconnected all devices but keyboard, tried to connect it to 10 ports, the problem persists.

  I could not find the corresponding question in google search and this forum. Anyone know about this?

  Hi keiosweb,

  Thanks for joining Dell Community Forum.

  You can try this keyboard and mouse on another system or another set of keyboard and mouse on this system?

  Have you tried to update the drivers for input devices and BIOS of our Dell supports the site?

  Please click on my DELL-username and send me a private Message with the Service Dell number and your e-mail address.

  Note: Please don't mention the id of service tag or by e-mail on the public forum because it contains your personal information

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• I can't find a way to start Satellite A300 of USB

  Hello

  I need some advice please.
  I have recently updated from a satellite A210 - 1 c 4 to a Satellite A300-1BZ.
  The satellite launched from USB without problem.

  How to set the A300 to boot from USB?

  To boot from a USB on this machine, you only have to set the stick in a slot USB, power of the machine upward and when the Toshiba logo appears, press F12.
  Then a menu similar to BACK appears when the USB can be selected to boot from.

  Welcome them

• Device not recognized USB - mouse

  Hi - write a new thread that I raised in a previous which I suppose is not sought at the most. Mods - delete please if you always looked at the other thread.

  I started intermittently gel experience with my old USB mouse, so I replaced it, that to have my new mouse (Canyon CNR-MSL7) begin to experience the same problems. Intermittent at first, but it became unusable over time - error "USB device not recognized". I tried two mice in another PC and they work fine. I use Vista is said by the way.

  I had a hard disk separated on my laptop (Sony VAIO VGN-AR71S) failure so I sent away for repair. I advised the hardware failure Sony and my USB mouse problems - she is back with a new HD but they said they found no defects with the USB.
  the mouse worked for about 1 day before I started getting the error 'USB device not recognized' again.

  A system restore will obviously work for me because my hard drive has been replaced and I have the same problem I had before, despite the installation of the more updated version of vista to Sony.

  The laptop has the most until drivers date etc, but does still not more than 95% of the time. I went through different threads here and I checked that everything is fine with the USB etc hubs, but not joy.

  I checked the ports are feeding correctly and that they are.

  I tried power down, stop and remove the advice of battery given here that seems to have worked so well for people but it does not work for me unfortunately.

  Is someone of MS can advise if it is sought in order to create a solution that works for those of us who does not work for the option "disconnect"? I tried all the solutions to this problem listed on the various threads on this subject in this area and other forums. Or can someone tell me if there is anything I can buy to remove the problem? Equipment etc? I thought that an upgrade to windows 7 could help, but I've seen a lot of discussion here that clearly show the same problem that appears for people who use it.

  Another new mouse like the ticket to me if you have hardware problems (and this is
  my best bet).

  Rob - bicycle - Mark Twain said it is good.

• USB mouse will not be in service to initialize the top when used through Dynadock on Satellite Pro U200

  The USB mouse not is won't boot on initialize top when used through Dynadock on Satellite Pro U200. If the mouse is reinstalled on the Dynadock it works fine. I use a Kensington Valuoptical USB mouse. I tried the alternative kensington mouse and had the same problem. Can someone tell how to fix this?

  Hi Jeremy

  Unfortunately I don't have a solution to your problem, but it can also be a technical limitation. I'm also interesting to buy this docking station and I would like to know if there is the same problem with memory external HDD or USB sticks.