LAN driver, incomplete or damage in the registry, how to fix?

Similar Questions

• upper and lower filters in the registry how ca I get it back

  in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized

  Hello

  You are not absent from these filters, you do not want in most cases.

  This is for Windows 7 and Vista is very similar.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• on my key board when I try to type a letter that has a number or a symble on it it type the number or the symble how to fix this?

  on my key board when I try to type a letter that has a number or a symble on it it type the number or the symble how to fix this?

  Make a lot of assumptions here...

  Keyboards only I know who have numbers/symbols on the letter keys would be a laptop or netbook without a numeric keypad.  Assuming that this is the case, the most likely cause is that you have the 'digital Locks' active.  To return to a regular keyboard, you must disable the NumLocks.  On a laptop, how to do varies from a Builder (in other words, if that doesn't work, download or consult the manual of your computer)... but usually this is done by pressing the "FN" key at the bottom of the keyboard while pressing the 'Num Lock' key, which is usually on the box at the top right of the keyboard.

  HTH,
  JW

• Printer DELL3115cnB328 FC - Says PS in paper when there is paper in the tray, how to fix?

  Printer DELL3115cnB328 FC - Says PS in paper when there is paper in the tray, how to fix?

  Contact the Dell printer support. It is highly unlikely that there is a Microsoft fix for your problem...

  http://support.Dell.com/support/index.aspx?c=CA&l=en&s=Gen

• When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  Hi Giovannil27088677,

  If you're still having trouble installing it, please refer to the following thread Photoshop CC install hangs at 48%

• In InDesign, manual kerning using text with Option + left/right just stopped working. The clues how to fix?

  In InDesign, manual using text with Option + left/right kerning. just stopped working. The clues how to fix?

  Hello Curry,

  I wanted to say thanks for trying to help figure this point. Believe it or not, it turns out that the culprit was the keyboard itself. Option key was fried. Go figure.

  Best,

  Kim urban

  Urban design

  [personal information deleted by Moderator]

• Do the payment plan, on 1 November, and still do not have access to the plan, how to fix this?

  Do the payment plan, on 1 November, and still do not have access to the plan, how to fix this?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• I have a C drive and a drive of F, F being the slave, how to change where to save downloads to?

  I have a C drive and a drive of F, F being the slave, lately, all my downloads went the F drive and now it is overloaded, how can I get downloads to go automatically on the C drive? and how can I transfer some of the overload from F to C?
  Thank you

  Hello

  When you start a download you can change the disc, folder and name of the download file
  as you wish. So, no matter what the default value is fixed you can modify as you wish. Notice the
  the path back to the top when you start a download.

  You can change the default value.

  Set the Internet Explorer default download path.
  http://www.tweaklibrary.com/Software_Applications/Internet-Explorer/27/set-default-download-path-of-Internet-Explorer/10153/

  How to change the Internet Explorer default download directory
  http://www.windowsreference.com/Internet-Explorer/how-to-change-the-default-download-directory-for-Internet-Explorer/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• printer 1815n lazer said paper when there is paper in the tray, how to fix

  I don't know what has changed, the printer was working fine and then started saying out of paper. I tried to put more paper, less paper, to take it in and out of the status bar.  Turn on the printer and restarting. I'm not savy with this printer, I recently bought, 2nd hand. Can anyone give me a suggestion, what else to try?

  Hello

  This happens to you while I try to print a file in particular?

  Step 1: Check the media and print settings

  1. when the printer is turned on, remove the power cord at the back of the printer, wait 30 seconds and then connect the power cord to the back of the printer.

  2. If the printer is not already on, turn it on by pressing the power button.

  3. replace any paper that is torn, dusty, wrinkled or folded. If the paper is curved, sketching paper, folding gently in the opposite direction of the one who rolls up or replace the paper.

  NOTE:

  Use plain paper in the unit until the problem is resolved.

  4. check that all the papers are the same size and type.

  5. press on the stack of paper on a flat surface to align the edges.

  6. check that the stack of paper to load into the device contains between 10 and 25 sheets of paper.

  NOTE:

  Do not load too much paper into the printer.

  7. Insert the stack of paper into the printer and then gently push the paper guides comfortably against the paper.

  8. set the paper settings in the print driver. The paper in the printer driver settings must match the paper settings for at least one of the installed paper trays.

  a. open a document in the application in which it was created.

  b. click on file.

  c. click print.

  d. click on Properties. The printer properties dialog box displays.

  e. click on the paper/quality tab.

  f. in the drop is size , select the size of paper loaded in the device.

  g. in the drop type , select the type of paper loaded in the device.

  h. click OK.

  NOTE:

  These changes do not change the default print settings. The print settings will revert to the default print settings the next time the application is opened.

  9. in the print dialogue box, click OK to print the document.

  10. try to print again. If the problem persists, continue with the next section.

  NOTE:

  If the problem is resolved and you want to print on a different type of media, change the paper in the unit and repeat steps 2 to 7 for new media.

  Step 2: Clean the rollers

  1. turn off the product and unplug the power cord.

  2. open the access door for access to the rollers. According to the model, this is usually the rear access door. See the user guide for more information on the location of the rollers.

  3. clean the rubber with a non fluffy cloth rolls, slightly impregnated with water.

  NOTE:

  Distilled, filtered or bottled water is recommended for cleaning the rollers. The tap water may contain contaminants that can damage the rollers.

  4. make sure that the rolls of paper based on the feeder, which lie behind the reels back, is cleaned. A cotton swab slightly moistened with water, may be necessary to achieve these rolls.

  5. close the access door and plug the power supply cord.

  6. try to print again. If the problem is not resolved, continue to the next step.

  Step 3: Repair the unit

  If you have followed all the steps and you are still experiencing a problem, service your product.

  Cause

  One of the following problems may cause the error message:

  ·    The paper is curved.

  ·    The printing side, or shiny side, the paper is not loaded in the feeder upside down.

  ·    The paper can not be engaged with the feed rollers.

  ·    The width of the paper guide is adjusted too tightly against the stack of paper.

  ·    The paper tray is not completely inserted in the product.

  ·    The paper in the printer driver settings do not match the paper loaded in the paper tray.

  ·    The driving rubber rollers are covered with dust.

  NOTE: You can also contact the manufacturer of the printer as it can also be a problem with the printer settings.

  Step 4: Turn off bidirectional printing and search for the issue.

  Here's how:

  a. click the Start button > click on Printers and faxes.
  b. right-click on the printer icon, then select printer properties.
  (c) in the Properties window, click the Ports tab.
  d. clear the check box for enable bidirectional support.
  e. click on the OK button.

• Satellite P10-304: bad sectors on the disk - how to fix?

  My drive HARD drive bad sectors developed and replacement needs, does anyone know how to do this?

  My model is a P10-304.

  In addition, Windows will not start upward in my old HDD because of bad sectors and the drive is protected by Norton and back, does anyone know how to bypass or disable round trip

  Hello

  I found these tips how to disable the Norto Go Back tool.
  You can uninstall it from your computer, disable GoBack to your laptop press 'space' GoBack screen button and select the option "disable" GoBack.

  Follow these steps:
  1. reboot your computer.
  2. when the Norton GoBack splash screen appears, press the SPACEBAR.
  3. in the Norton GoBack boot menu, click on disable.
  A message informs you that disable Norton GoBack erases history and you will not be able to run the hard drive or hard disk restore advanced restore until Norton GoBack is turned back on.
  4. click on Yes.
  5. click on continue.
  Your computer restarts automatically, and Norton GoBack is off
  After restarting the laptop, I recommend once again using the following key: CTRL + ALT + G.
  Immediately press on and hold the keys Ctrl + Alt + G after restarting the laptop you. A message you giving the possibility to force the removal of GoBack master boot record. Press F to force the removal of GoBack master boot record.

  If failure of keys Ctrl + Alt + G in the first time then try this again for three or four times until you get the prompt to remove the master boot record of GoBack.
  Finally, restart the computer.

  To fix bad sectors on the HARD drive, you could boot from the XP CD to use the console of "repair".
  And then use the CHKDSK /p command to repair the bad sectors.

  Good luck

• my computer screen has spilled on the side how to fix

  How to fix my computer screen when its upside down on the side

  How to fix my computer screen when its upside down on the side

  With control panel display screen resolution Orientation.

  If your computer is a Tablet you only to rotate or find that there a button or function key that she will turn 90 degrees at a time.

  BTW this issue may have been better asked in a forum for your operating system on its user interface.

  HTH

  Robert Aldwinckle
  ---

• Portege R500 - Bad optical drive delays the start - how to fix?

  The Portege R500 has recently begun does not start. Initially there not some time later, frequently. By chance, I discovered that if I left alone for a minute or two, he will continue to start. That and the noise coming from the optical driver, made me suspect the problem was not with the HARD drive, as I feared at first, but with the optical driver.

  I read in the thread below that other people had this problem. MrBear mentions * I pulled it out again and pushed on the Ribbon connecting the CD-ROM to make sure they were safe. Turned on again and he pulled up without problem! *

  Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=43300&tstart=0]

  Could someone clarify in what ribbons must be treated? Only those who are visible by opening the drive? Or it is necessary to open the notebook?

  Furthermore, if I booted into Windows, it stopped again, for a minute or two, while Windows is loading. With Ubuntu, there is no such problem. Perhaps Windows tries to communicate with the optical driver for some reason any.

  Tnaks for any help!
  Leonardo

  Hello!

  Is your laptop still under warranty? If so I put t understand why you try to solve the problem by yourself. Go to the nearest EPA and ask a technician for help. These guys are very useful and they have the most experience on laptop repairs.

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  And the problem with Windows, it is difficult to tell why Windows stops for a minute. Maybe it s a software problem so disable all programs that you start n t need in msconfig.

  Good bye

• Want to use ReadyNAS as a shared drive for all computers on the network, how do I do this?

  Nevermind - figured it out

  Hi Axulus,

  Welcome to the community!

  You can also consult these articles for reference.

  How to map a network drive (Windows XP, Vista, 7, 8, 10, Mac OS X)

  ReadyNAS with access using Windows Explorer

  To access the ReadyNAS using MAC OS X

  Kind regards

  BrianL
  NETGEAR community team

• need ORIGINAL 60 GB hard drive for HP mini 1035NR; Oh, and how to fix the hinge? (maybe)

  Hello everyone, I know you don't have care not Hello but rather than the problem at hand. anyway I need another hard disk of 60 GB for the mini I have because it gave me the blue screen of death and also in the BIOS told me that my HARD drive is in BAD condition, Ann developed it will say warnings for writeback failed on some things, and also ive noticed that when I play Halo sound not as fast as it has been as well as many other things and ive tried system restore also and still will not make much difference. I have not explored the jungle with her, but sometimes sometimes I fall on my desk, it's a reason very likey. Everyone ant to help out by allowing me to know if there is a place on earth that will transport a HDD specially for my mini? Another note, it's that I DON'T want an SSD. as I have my laptop on my desk, 95% of the time it is not necessary.

  carbonfibreguy wrote:
  Hello everyone, I know you don't have care not Hello but rather than the problem at hand. anyway I need another hard disk of 60 GB for the mini I have because it gave me the blue screen of death and also in the BIOS told me that my HARD drive is in BAD condition, Ann developed it will say warnings for writeback failed on some things, and also ive noticed that when I play Halo sound not as fast as it has been as well as many other things and ive tried system restore also and still will not make much difference. I have not explored the jungle with her, but sometimes sometimes I fall on my desk, it's a reason very likey. Everyone ant to help out by allowing me to know if there is a place on earth that will transport a HDD specially for my mini? Another note, it's that I DON'T want an SSD. as I have my laptop on my desk, 95% of the time it is not necessary.

  1. it is still under original factory warranty?  If so, call the HP Technical Support for replacement under warranty.

  2. you can buy the disc OEM HP here.