Language change has no effect...

Similar Questions

• the APEX api call, change the repository, in the context of the application has no effect

  Hello

  I call APEX api stored procedures manipulate the repository (such as apex_lang.update_translated_string, apex_lang.publish_application or apex_instance_admin.set_parameter) pl/sql by setting apex_util.set_security_group_id (< workspace_id >) following this example indicated in the documentation of the api of the APEX:

  Start

  --

  -If running SQL * Plus, there set the environment

  -for the workspace Application Express associated with this schema. The

  -call to apex_util.set_security_group_id is not required if

  -you are running as part of the Application Builder

  - or an Application Express application.

  --

  C1 in (select workspace_id from apex_workspaces)

  loop

  apex_util.set_security_group_id (C1.workspace_id);

  "exit";

  end loop;

  -Now, actually create the mapping of the language

  apex_lang.update_translated_string (p_id = 123456789 >)

  , p_language = > 'nl '.

  p_string = > "says is a test");
  

  commit;

  end;

  /

  Call it the SQL guest (or Toad) everything works fine.

  But when trying to call apex_lang.update_translated_string from an application (with or without the security_group_id) APEX, nothing happens. No error message, the process is complete, but the string in the filing of the translation has not changed. Same effect for other api call that I mentioned. I tried the different authentication scheme in my application: DB account, users of the APEX, custom.

  An idea or a clue on what I'm missing here?

  Kind regards

  Christian

  Dear Mr. Rokitta,

  I tested myself on apex.oracle.com just now, and I had no problem using your anonymous PL/SQL block to update the chain of my filing of translation.  It worked successfully to these two SQL commands in SQL Workshop and also inside an APEX application running.  I also looked at the underlying code, and it's so simple - also long the security_group_id is set correctly, the specified ID is valid and the language code is the code of language of the APEX_APPLICATION_TRANS_REPOS chain, the update should go ahead.

  If set you a test on apex.oracle.com case where this would have been does not work, I would be happy to take a look.

  Merry Christmas.

  Joel

• Cannot disable new message sound in 31.3.0: prefs checkbox has no effect

  After you install this update, I was surprised to hear a beep at each arrival of a new e-mail message. The related checkbox (General::Play sound) has no effect. I get the sound if the box is checked or unchecked. After you change the setting stop and restart the application has no effect.

  Mac OS 10.9.5

  I wonder if it's line in unix versions where the system / Thunderbird. After all the OSX is a descendant of BSD unix. Make sure that OSX is not set to beep.

• Why the text size option has no effect?

  Hi, the text is really small. When you browse display option settings and make the text bigger using the a button has no effect on the actual pages. The text is still tiny. I tried do download 'no small text' but do get the message that it is incompatible. Is there a solution? Thank you.

  I have version 29.

  It is difficult, but that the Office font size change affects only 'some optimized Desktop Web sites '. It is really misleading.

  There is no way to adjust the font size on websites mobile optimized, which I assume you are trying to adjust.

• I want media files to play in outdoor applications. Media.Windows - Media - foundation.enabled has no effect for me.

  So ridiculous that something changes unexpectedly. I run a recording studio. This is how to make money to eat. I could always click on a wav/mp3/etc. and choose Save or open with an external drive. I have to do this a lot. The only way I seem to be able to do now is save it somewhere and then open it from there. Thank you. Twice the work. Media.Windows - Media - foundation.enabled = everything that has no effect for me. I want to say what I really think, but I'll bite my tongue.

  Edit: Are you kidding me? It is required to install a software to be able to post this question? Still bite my tongue...

  Try the media.directshow.enabled pref set to false.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Photosmart C4585 display language changed in Japanese

  The display on my C4585 language changed in Japanese (in English).  I got the printer over a year and it has been great so far.  I have consulted with the built-in web server, but there is no tab 'Settings' which is apparently what I need to access the 'languages '.  Any ideas?  Thank you, Ian

  Hi Ian,

  You will probably try to reset the printer.  This would be with a semi full reset.  I can help you with that, but you have to accept to not publish the steps.  I would like to send you via private message.

  If successful, the printer should be reset back to the factory settings.  When the printer starts initialization, you will be asked to select a language.  Once you have completed the installation process, you should be good to go.

  If the printer is on a wireless network, it could be removed from the network, and you need restore the link.  You must know the network name and network password.  Anything is in memory would be erased.  Let me know if you want to reset.

• Maxx Audio does not work on Inspiron 5520 Win 7 64 bit (start-up Maxx Audio has no effect)

  Hello

  I am running Windows 7 Professional 64 bit on my Dell Inspiron 5520. I have installed audio drivers available for this product (http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/inspiron-15r-5520?driverId=X8MPY&osCode=W764&fileId=3075592661) and the installation was successful. (i.e. no error displayed during installation)

  However, there seems to be no effect on the audio whenever I have switch between MaxxAudio modes or turn it off completely! (using the control panel Audio Dell). Pressing the quick set button shows the audio mode has been changed, but it has no effect on the audio.

  Really appreciate any help to understand what the problem is.

  Thank you very much.

  Hi mluvis,

  Welcome to the community.

  I suggest you to update the chipset driver and BIOS. Please click the below mentioned link which will take you to the site of pilots:

  http://Dell.to/QjjZDA

  Enter the serial number of the computer and choose the operating system installed on the computer. Please upgrade to the latest version of drivers and BIOS for your PC.

  In addition, you can click on the direct link to the drivers from your system:

  http://Dell.to/TvHqK6

  NOTE: Make sure the battery is more than 30% of load and the power adapter is connected during the BIOS update.

  Once the BIOS and chipset driver is installed, restart the system and install the audio driver.

  If the problem persists, perform the restore of the system for the date, that the audio was working properly. Please click the below mentioned link to perform a restore of the system:

  http://Dell.to/VRG2ad

  NOTE: The system restore will remove all applications installed after the restore point.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Sale of adblock for unknown buyer has an effect on Adblock Plus?

  Sale of adblock for unknown buyer has an effect on Adblock Plus?

  No, AdBlock Plus is a completely different extension.

• How can I disable gifs completely when image.animation_mode = 'none' has no effect whatsoever?

  I'm really sick of gifs. They are distracting and unnecessary. I want to turn them off completely. I tried image.animation_mode = none; This has no effect whatsoever. I looked for extensions. None of them work. I'm really irritated by this. Can someone please help me to completely disable the gifs?

  Thank you.

  This preference works for me with the gif and png in Windows images.

  One way to investigate the format used is the Panel of the Page Info Media dialog box. You can open the Page Info using either:

  • Right click on a zone empty of the and select View Page Info > media
  • (menu bar) Menu Tools > Page Info > media
  • Click the icon of padlock or globe to the left of the address of the site > additional information > media

• Why the gradient tool has no effect?

  OK, so I figured out how to rub the head and tail of a piece with the marquee tool - why must you select Tools twice?  Why are there two selectors side-by-side? - and now, I'm trying to get the Fade tool at work.  After selecting the Fade tool (twice!), I can highlight the region at the end that I want to disappear, but he does not draw a fadeout, and it has no effect whatsoever.  The documentation says to just drag and they appear.  And Yes, I have a zoom of the track at the bottom of the screen, I work with (where I select the Fade tool (twice!) once again).

  Is there something about this program that is intuitive and logical, or it should be hostile user?  Laughing out loud

  TIA,

  GEO

  Bleaching works fine here...

  

  The tool the leftmost is the tool of the left mouse button, the Center is what the mouse pointer becomes when you hold the key, command key, and the right is assigned to the right mouse button.

  

  You can exchange this behavior for other behaviors here:

  Logic Pro > Preferences > General > edition

  

• Switching screens has no effect of movement. Is this a bug?

  When I open an application or go to the home screen, the screen zoom back to pass. I know that if I turn "reduce the motion" on, then it will have a fade effect. I don't know why, but sometimes there is absolutely no effect and he will jump between screens as if there's a problem.

  For example, I would be something looking on Safari and want to return to the home screen. Instead of having the effect where it zooms in on the app and transitions, it is has no effect. There is no transition. He jumps.

  It does not really with anything. The problem goes away when I restart my phone, but I would like to know if anyone else runs into this problem and if there is a fix for this. I don't know if it's because of the recent update (iOS 9.3) or if it's just my phone.

  What phone do you use?

  Also have you tried to restart the phone?

  It's just a matter of processor which should be resolved after restarting the phone

  Try it and let me know

• Intel GMA - disabling access keys rotation has no effect

  I want to use ctrl + alt + down, alt + top and ctrl in some application, so I want to disable these access keys. I did it in Intel Graphics Media Accelerator Driver for Mobile settings but it has no effect: these key combinations are always turning my screen. The parameters are properly remembered.

  I tried on the administrator and normal user account. Someone knows how to fix this?

  Hello

  As I see in the hot key settings each entry listed for the purposes of the action may be disabled separately.
  Click on each combination of shortcut keys and choose the option Disable.

  Please let me know if it works.

• Windows 10 - speaker volume slider Audio settings has no effect

  I don't know which version of Skype broke this setting or if it actually happened on the upgrade to win 10 and I didn't notice. However, since a few months now, the audio signal coming on a call is much too hard. Open the Audio settings and the speaker volume setting has no effect. I can't find any reference to this in aid of Skype or in the community. Does anyone have the answer?

  The question could be discussed here:

  http://community.Skype.com/T5/hardware/my-microphone-volume-is-automatically-adjusted-by-Skype/m-p/4...

  Recently what happened to me once or twice, and what helps is to clear the track record.

  http://community.Skype.com/T5/hardware/my-microphone-volume-is-automatically-adjusted-by-Skype/m-p/4...

• If I delete a song in the list of duplicates itunes, it has an effect on the existing playlist?

  If I delete a song in the list of duplicates itunes, it has an effect on the existing playlist?

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > view > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning toback up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  With this many files, it might pay to break down the problem into smaller pieces.

  TT2