language of performance alerts

Similar Questions

• Performance alert

  I had an alert recommending that I have uninstall Intel
  Graphis kernel mode driver igdkmd32.sys dated 26/04/2009 and I found in programs and did. My clarity was great. When I started my computer today, there were two installed on my computer as of April 2009 and yesterday but the progam did not appear in my program list. So I went to a restore point to get the program on the list and once again uninstalled, but two of them are still there. Another report on the performance was about resolution and transparity of the computer. I can't fix that either. When I go to email or homepage there is yellow! in the corner with these errors. Please tell us how to do this thank you.

  Hi Jeta1234,

  A. you still get the performance alert on your computer?

  B. you see an exclamation point in Device Manager?

  C. you use internet explore browser?

  You have exceeded the graphics drivers on your computer. You can download and install the latest graphics driver on your computer that will correct problems resolution as well.

  On web pages yellow exclamation point may be due to some incorrect settings in the browser. If you use internet explorer, then you can try to reset your internet explore.

  Install the drivers

  1. click on start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. the Device Manager opens.

  4. see if you can find a yellow exclamation next to the graphics card.

  5. If you find one then right click on the driver and the Uninstall it.

  6. go on the Intel site and download the latest display drivers and install it on your computer.

  Optimize internet Explorer and see if you are able to get rid of the yellow exclamation.

  Open the link below and click on the cue, he touches.
  http://support.Microsoft.com/kb/936213

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• . How can I change the language of recovery media to English

  How can I change the language of recovery media to the English. When I tested the lead recovery media in the page was in an unknown language, probably french or Spanish. Sony Vaio SVE15123CDW

  Have you bought the recovery discs or you created it?

  You will get the possibility to change the language while performing the recovery by using the created disks.

• Message error "language could not be determined. How I put it to English in Windows XP

  My disc had to be rebuilt and now I get "Language could not be determined" at startup and when I try to restore my system Retore disc drivers.  Where I put the language option.  I looked at clock/calendar, but did not see an option for the language.

  Hello

  To open the regional and Language Options perform the following steps:

  a. Click Start.

  b. click Control Panel.

  c. click on Date, time, language and Regional Options.

  d. and then click regional and Language Options.

  See:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_mui.mspx?mfr=true

• I have laptop with XP Professional SP3. I need ti change to the U.S. version of the language, help, descriptions... ALL THE

  I use an American program and who wants to egliish (USA) language perfect performance.

  I changed the look of the amounts (1,000.00) in the United States, glance (1,000.00) and date/time and now

  Outlook express checks my German text against engish! But not all, thast U.S. program

  He wants everything in style USA.

  Hi Peter,.

  ·         You have the German version of Windows XP installed?

  ·         You want to change completely in English?

  You can install the Windows XP Service Pack 3 MUI Pack Update and change the display language.

  Download details - Microsoft Download Center - Windows XP Service Pack 3 MUI Pack update

• Please help me to restore the HP Laser jet M1522 English language

  Unfortunately, has always been the default language on Spanish and I don't know any Spanish to get that back into English.

  I bought this new product to off the shelf and have always thought that I have would mess with it later... now that I'm playing with it - I have no idea how to get the English here? Help, please!  Thank you!

  To change the display in English language, please perform the following actions on the control panel of the printer:

• I need to convert PDF into Word Document, so it can be edited. But grateful text options do not have the language I need. How can I convert the file in the desired direction of my language?

  I need to convert PDF into Word Document, so it can be edited. But grateful text options do not have the language I need. How can I convert the file in the desired direction of my language?

  The Acrobat application provides no ability to language translation.
  If you locate the language for the applications from the OS, MS Office, Acrobat, etc. to the desired language try again.
  Alternative: transfer a copy of the content in a web site based in PTE (Bing or Google offers a free service).
  Transfer the output in a word-processing program that is localized in the appropriate language.
  Perform the cleaning.

  Be well...

• Satellite M70 - lost the keyboard layout

  Hello

  Yesterday, all of a sudden my keyboard has stopped working properly. I checked all keyboard configuration and they are correctly set to Portuguese, but when I try to use symbols (absolutely necessary in my language) they perform different tasks, for example, when I press 'a' the cursor goes to the bottom of the page, as if I had pressed "Page Down".

  When I press "BACKSPACE", it erases the previous letter, but it goes at the beginning of the line (as if I had pressed "Home").

  I have re-installed the controller and all, but I do not understand what is happening.

  When I connect an external keyboard, it works perfectly.

  Can you help me?

  Thank you
  Carina

  Hello Carina

  Have you noticed the same behaviur using different applications such as notepad, wordpad or some office applications?

• Why do I have a Spinning beachball when waking from sleep?

  When I wake my OS X 10.6.8 iMac 21.5 "sleep it was very slow and he was/is a spinning beachball before it starts to work.  Thinking that I might have a HD II etresoft failure to evaluate it and got "excellent" condition while speeding up considerably my action of firefox, but the beach ball is still there.

  I read mac extremely slow (at random), memory full, fine CPU

  Then I ran the etresoft and checked my Console to find several notations like this:

  28/01/16 22:52:10 firefox [14441] Set intl.ime.nstextinput.enable to true in topic: config to the difficulty of entry.

  28/01/16 22:58:10 [0 x 0-0x3d43d4].org.mozilla.firefox [14441] 1454050690890 addons.update - checker clearly WARN of update for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain a property of updates

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x1003d8980 NSCFDictionary autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x1003dc160 NSCFArray autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x1003bd6c0 NSCFDictionary autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x11accb6f0 NSCFData autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): 0x11c2a9940 of class __NSFastEnumerationEnumerator autoreleased object with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x11c2dcfc0 NSCFNumber autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x118cba2b0 NSConcreteValue autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x11ac785e0 NSCFNumber autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x118cba310 NSConcreteValue autoreleased with no pool in place - just a leak

  29/01/16 03:36:46 firefox [14834] * __NSAutoreleaseNoPool(): object of class 0x11c2931c0 NSCFDictionary autoreleased with no pool in place - just a leak

  29/01/16 03:36:47 firefox [14834] * __NSAutoreleaseNoPool(): 0 x NSCFNumber autoreleased object of class 100373880 with no pool in place - just a leak

  29/01/16 03:43:21 [0 x 0-0x3e93e9].org.mozilla.firefox [14834] vector smash protection is enabled.

  29/01/16 03:44:44 [0 x 0-0x3e93e9].org.mozilla.firefox [14834] Performance alert: Async off animation because (1325, 9183) image size is larger than the viewport (1508, 801) or the visual (1325, 9183) rectangle is larger than the maximum allowed (17895698) [div]

  29/01/16 03:44:50 [0 x 0-0x3e93e9].org.mozilla.firefox [14834] 0

  29/01/16 03:59:53 [14859] Bulletin Board Bulletin Board: launched from NoticeboardUpdateOperation

  29/01/16 03:59:54 [14859] scoreboard scoreboard: NoticeboardUpdateOperation finished with a request for an opinion to show: (null)

  29/01/16 03:59:54 [14859] Bulletin Board display: no notification to show. Closing.

  29/01/16 04:22:33 Silverlight preferences [14894] could not connect to the SetGPUVideoDecodeEnabled action: the target of the PrefsPaneController class

  29/01/16 04:23:21 [0 x 0-0x3e93e9].org.mozilla.firefox [14834] 0

  29/01/16 04:23:55 firefox [14834] Set intl.ime.nstextinput.enable to true in topic: config to the difficulty of entry.

  29/01/16 04:36:23 firefox [14834] Set intl.ime.nstextinput.enable to true in topic: config to the difficulty of entry.

  Could be my problem?

  Hi, Goldenbill.

  Please visit Apple support communities.

  I understand that your computer stops responding when waking from sleep.  Be sure to quit all open applications that are not in use before placing your iMac in mode 'sleep'.  The article below describes how to leave applications for Yosemite, but the measures also apply to the 10.6.8.

  OS X Yosemite: Quit apps

  The next step would be to go through the following troubleshooting information.

  If your Mac does not wake up when you plan

  Your Mac can to pause a few seconds before he wakes up. If she does not wake up at all, check these possibilities:

  • The brightness of your screen may be refused.
  • If you use an external monitor, your screen can be disabled.
  • Your Mac may be safe sleep. For to wake up the safe sleep, press the power button.
  • Find a light sleep, if any, and make sure that your Mac is not turned off.

  If the previous steps do not work

  These additional steps can help identify or resolve the problem:

  • Reset the SMC.
  • Reset the NVRAM.
  • Disconnect external devices other than your Apple keyboard, mouse, and screen. If that solves the problem, gradually reconnect your devices, testing each time until you find the device that interferes with sleep. And then check the documentation that came with the device or contact the manufacturer of the device.
  • Start in Safe Mode to see if the problem is related to startup items not Apple, login items or kernel extensions.
  • Try to isolate the problem by using a different user account.

  If your Mac does not sleep or wake up when expected

  See you soon

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• I started using a video converter. To convert YouTube to Mp3 Music. Is that going to be a problem for my computer somehow? I have Norton Anti virus.

  The only thing that makes me think it would be a problem. Is that my Norton Anti virus has arisen with a high use of the computer. I know I've read online others with this nuisance with NAV. It worries me just because of what I do.  :)

  Hello

  Sorry for the inconvenience. I'm Vineeth and I Support of Norton team.

  You will receive this alert from the Performance of your Norton product alert feature. Your Norton product monitors the performance of your system. If it detects an increased use of system resources by any program or process, it warns you with the performance alerts. Performance alert informs you with information about the name of the program and the resources that the program uses excessively.

  If you don't want to use this feature, you can disable it in settings. For more information, read:I receive alerts on high of the processor or the use of the high memory of my Norton product

  Thank you!

  Vineeth
  Norton support

• Can I remove ping.exe and how do I do it?

  My computer overheats frequently - that tells me is a lack of basic in Slimlines design - but I wonder if withdrawal ping.exe could help at all. I did a Norton scan and it's using at least 100% of one CPU. I am running Windows Vista and get a range of answers when I googled If yes or no it is fine to remove

  Full path: c:\windows\system32\ping.exe
  ____________________________
  ____________________________
  Developers Microsoft Corporation
  Version 6.0.6001.18000
  Identified 22/12/2011 at 09:45:59
  Used last 12 22, 2011 at 09:54:49
  Startup Item No.
  ____________________________
  ____________________________
  Reliable
  With a conventional use, this program very rarely crashes.
  ____________________________
  Many users
  Millions of users in the Norton Community have used this file.
  ____________________________
  Mature
  This file was released 3 years 9 months ago.
  ____________________________
  Trust
  Norton gave a confidence rating to this file.
  ____________________________
  Source file:
  Ping.exe
  ____________________________
  Performance
  Moy. Resource use: Heavy
  Average CPU use: Heavy
  Moy. Memory use: Heavy
  ____________________________
  Performance alert
  Time:
  2011-12-22 09:54:37

  Process ID 6124
  CPU 100% of the CPU at least one.
  Normal memory
  Handles Normal number
  Disc normal activity
  Disk writing activity
  ____________________________
  Network
  ProtocolRemote ConnectionPort

  ____________________________
  File-print - SHA:
  4e0f2e966f9aa547a4e52ef2e122e63ad51dd2bc0cf069ab49b51e27e5664cb3
  ____________________________
  File-print - MD5:
  015e1f472a5633520903353375f7e69d
  ____________________________

  Hello

  -Don't you make changes to your computer before the show?

  Ping.exe is a Windows core system file. It is a Microsoft signed file. The program has no visible windows.

  Some malware camouflage themselves as ping.exe, particularly if they are located in the folder c:\windows or c:\windows\system32. So check the process ping.exe on your pc, be it on the pest

  I suspect a malware problem. I would have you use the Microsoft Safety Scanner and check if the problem persists.

  Note: You may lose some data infected while the malware is being eliminated.

• 59 9 with Internet Explorer 11 error code

  I was a problem with widows 7 IE 11 slow and received messages from some sites that my browser is obsolete.  I installed IE11 and still had problems, so I installed IE 10 and most of my problems went away. Then, I tried to reinstall IE 10 and IE11 and got a 9 c 59 error code. I tried the fix he progrm with no luck. I have all that I can do to reinstall IE 11 here or should I switch to windows 10?

  Original title: Impossible to reinstall IE 10 or 11

  Hello 

  Welcome to the Microsoft Community Forums.

  I understand that you receive 9 c 59 error code when you try to update Internet Explorer 10 for Internet Explorer 11.

  Please answer these questions to better understand the issue and help you:

  In order to to upgrade to IE 11, you must have service pack 1. So a check, it's this computer is on service pack 1?

  Install the Windows updates pending on the pc to check if that helps.  Updates are additions to software that can help to prevent or fix problems, enhance the operation of your computer, or improve your computing experience.

  This problem may occur if the preconditions of the computer will not meet for Windows 7. I suggest you to see the following link for the Windows 7 pre needs.
  http://support.Microsoft.com/kb/2818833

  Try to solve the problem of Internet Explorer was updated by following suggestions:

  Method 1:

  You can try the knowledge base article troubleshooting steps and check.
  Troubleshooting a failed installation of Internet Explorer 11
  https://support.Microsoft.com/en-us/KB/2847882

  Method 2:
  You can download Internet Explorer 11 of the link and save it to the desktop.
  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-11-worldwide-languages

  Perform a clean boot. Once in clean boot mode, retry the installation of Internet Explorer 10
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: After the adventures of shooting set the computer to start as usual by performing step 3 from the Knowledge Base article.

  If you need help with this issue or other issues related to Internet Explorer 11, keep us informed. We will be happy to help you.

  Thank you

  Er.Mayank Chadha

• How can I get CF CAL to advance month in IE9

  I'm at my wits end. I built a portal around the CF calendar only to discover that in IE 9 the CF_Cal will not advance the month. Below is the tag that displays a popup calendar to select the date. In IE9, by clicking the back or next button does nothing. Any help would be appreciated.

  < cftry >

  < cfif parameterexists (attributes.target) EQ 0 >

  < cfthrow message = "NoTarget" >

  < cfelseif parameterexists (attributes.formname) EQ 0 >

  < cfthrow message = "NoTarget" >

  < / cfif >

  < name = "cfparam attributes.date" default ="#Now () #" > "

  < name = "cfparam attributes.image' default '0' = >"

  < cfoutput >

  < script language = "JavaScript" >

  var months = new Array ("January", "February", "March", "April", "May", "June", "July", "August", "September", "Octo bre", "November", "December")

  totalDays var = new Array (31,28,31,30,31,30,31,31,30,31,30,31)

  function openCalWin_ #attributes.target # () {}

  Stats ='toolbar = no, location = no, directories = no, status = no, menubar = no,'

  his stats += 'scrollbars = no, resizable = no, width = 300, height = 250'

  CalWin = window.open ("","calendar", his stats)

  var calMonth = #DateFormat (attributes.date, "M") #.

  var calYear = #DateFormat (attributes.date, "YYYY") #.

  Subsist = new Date (calYear, (calMonth - 1), 1)

  buildCal_ #attributes.target #(theDate)

  }

  function buildCal_ #attributes.target #(theDate) {}

  var startDay = theDate.getDay)

  var printDays = false

  var currDay = 1

  var rowsNeeded = 5

  If (startDay + totalDays [theDate.getMonth ()] > 35)

  rowsNeeded ++

  CalWin.document.write ("< html > < head > < title > select a Date < /title > '")

  CalWin.document.write ("< STYLE TYPE =" text/css">" ")

  CalWin.document.write ('A {color: # 000000; do-family: Arial, Helvetica; do-size: 14pt; make-weight: bold; text-decoration: no} "")

  CalWin.document.write (' Hover {color: red ;} ""} ")

  CalWin.document.write ("</style > < / head > '")

  CalWin.document.write ("< body > < a name =" this"> < / a > ')

  CalWin.document.write ("< table align = Center height = 100% width = 100% border 2 = black cellpadding = 0 cellspacing = 0 bordercolor = > '")

  CalWin.document.write ("< tr > < th bgcolor = purple colspan = 7 > < of police = Arial color = white > ' + months [theDate.getMonth ()] + ' ' + theDate.getFullYear () + '< /polices > < /th > < /tr >'")

  CalWin.document.write (' < tr bgcolor = "# D18FD3" > < th > < font = Arial color = white > Su < /polices > < /th > < th > < police = Arial color = white > MB < /polices > < /th > < th > < font = Arial color = white > you < /polices > < /th > < th > < font = Arial color = white > us < /polices > < /th > < th > <) Police = Arial color = white > Th < / fonts > < /th > < th > < police = Arial color = white > en < / font > < /th > < th > < of police = Arial color = white > her < / fonts > < /th > < /tr > ')

  for (x = 1; x < = rowsNeeded; x ++) {}

  CalWin.document.write ('< tr >')

  for (y = 0; y < = 6; y ++) {}

  If (currDay == 1 & &! printDays & & startDay == y)

  printDays = true

  CalWin.document.write ("< td align ="center"width=14.28% >")

  If {(printDays)

  CalWin.document.write ("< a href =" javascript:opener.placeDate_ #attributes.target # (' + theDate.getMonth () + ',' + currDay + ',' + theDate.getFullYear () + "") "> ' + currDay ++ +"< /a > < table >"")

  If (currDay > totalDays [theDate.getMonth ()])

  printDays = false

  }

  on the other

  CalWin.document.write ("< table > '")

  }

  CalWin.document.write ("< /tr > '")

  }

  CalWin.document.write (' < form > < tr bgcolor = "# D18FD3" > < td colspan = 7 align = "center" > < input type = "Button" size = "2" name = value "Back" = "< <" onClick = "opener.getNewCal_ #attributes.target #(-1)" > < font = Arial color = white size = "1" > use the arrows to navigate through the months. < /polices > < input type = "Button" size = "2" name = value "Forward" = "> >" onClick = "opener.getNewCal_ #attributes.target #(1)" > < table > < /tr > < / form > ')

  CalWin.document.write ("< /table > < body / > < / html > '")

  CalWin.document.close)

  }

  function getNewCal_ #attributes.target #(newDir) {}

  If (nouveau_repertoire ==-1) {}

  theDate.setMonth (theDate.getMonth () - 1)

  If (theDate.getMonth () == 0) {}

  theDate.setMonth (12)

  theDate.setYear (theDate.getYear () - 1)

  }

  }

  Else if (nouveau_repertoire == 1) {}

  theDate.setMonth (theDate.getMonth () + 1)

  If (theDate.getMonth () == 13) {}

  theDate.setMonth (1)

  theDate.setYear (theDate.getYear () + 1)

  }

  }

  CalWin.document.clear ();

  buildCal_ #attributes.target #(theDate);

  }

  function placeDate_ #attributes.target # (monthNum, dayNum, yearNum) {}

  dateString var = (monthNum + 1) + "/" + dayNum + ' / ' + yearNum

  document #attributes.formname #. #attributes.target # .value = dateString

  CalWin.close)

  }

  < /script >

  < cfif #attributes.image # NEQ 0 >

  < a href = "javascript:openCalWin_ #attributes.target # ()" > < img src = "" #attributes.image # "border = 0 > < / a >"

  < cfelse >

  < a href = "javascript:openCalWin_ #attributes.target # ()" > [C] < /a >

  < / cfif >

  < / cfoutput >

  < cfcatch type = "Any" >

  < script language = "JavaScript" >

  Alert ("you must provide a value for the attributes FORMNAME & TARGET!")

  < /script >

  < / cfcatch >

  < / cftry >

  Rick,

  Have you tried loading the page using "Compatibility Mode"?  If so, the control works properly then?

  Keep in mind that the ColdFusion UI tags are based on 3 party JavaScript libraries (ExtJS probably, but some use YUI) and Flash (as in the case of CFCalendar) widgets.  The underlying JavaScript libraries have not been updated by Adobe in a while and there are several versions behind.  There are likely more modern versions of browser compatibility problems.  Tags expose the features of these underlying libraries.  For these reasons, there is a general in the ColdFusion community feeling that these tags UI no longer serves.  Instead, people should develop applications using JavaScript UI libraries directly and not depend on abstraction of these libraries ColdFusion or Flash.  There are several implementations of JavaScript calendar out there to choose.

  Hope this helps some,

  -Carl V.

• TUNING METHODS

  Can someone please tell me in simple language on performance tuning methods. Please do not give online as reference doc.

  904298 wrote:
  Can someone please tell me in simple language on performance tuning methods. Please do not give online as reference doc.

  Watch an action (for example, a SQL statement), determine the duration of this action, identify what part of this time is spent waiting for resources and what part is working actively towards the completion of the action.

  Performance optimization is simply minimize the waiting time for the resources and make more effective, active work in will not affect anything else in the environment.

  In other words: find out why it is slow, came up with some ideas how to speed up, try the ideas and duck when others cry out that their role is now slowing down.

  ... Simple methods: use all the tools available to determine the component/length of time and then use the tool between your ears to determine possible solutions. It is based on experience.

  Published by: Hans Forbrich on March 8, 2012 12:41

  Moreover, the experience begins by reading. Reading specific manuals. :-)