Laptop computer Inspiron - C drive close to the full

Similar Questions

• Inspiron 15 laptop computer (Inspiron 3521) tried to tie the IPHONE with no luck?

  I went out of town 2 weekends ago. Because the WIFI in motels is poor, most of the time, I set up my IPHONE for tethering. Times

  I tried connecting with no luck. I could connect my iPad w/wifi and bluetooth. I have 2 HP. Dell & Toshiba computers laptops.
  I called ATT and worked for 2 1/2 hrs to connect to the laptop with no luck at all. LT Dell showed 5 bars but I still
  could not connect. It has capabilities both wifi & bluetooth but just does not connect to one. Any help, I have no problem connecting to wifi at home or in other places?
  I tried everything I can think of without success. Each of them connect to my wifi at home very well.

  Sorry I don't have right to you. I am 69 and I have a lot of things. I saw no response for the systeminfo scan but anyway on the Thur. I cut e McAfee firewall ight for 15 minutes and it connected immediately. last night I finally had it connects using bluetooth also. I tried even w / the Toshiba without success I'll try again later. I thank you very much for your time and expertise. I worked around the PC since I am a DuPont in 1998. Since that time, I learned a lot. Between AT & T, APPLE, Microsoft forums on 6 or 7 hours without having success. Yet once I thank very you much.

  Bob Kirby

• can not get the printer to work when sending my laptop computer that he used to work the printer is on and functional

  Can't get printer to work when sending my laptop computer that he used to work the printer is on and functional. Canon pixma MP180

  Hi NickManchisi

   

  1. for how long have you been faced with this problem?
  2. what happens when you try to print?
  3. do you receive any error messages?

  Method 1 :
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/308028

  
  Method 2:

  You can even perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time when you have not experienced the problem.

   

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Refer to the following help link on performing a system restore.
  http://support.Microsoft.com/kb/306084

   

  I hope this helps.

• I bought the design Adobe CS6 and premium and I need to download my product on my new laptop computer, however I don't have the CD came it with my purchase. How can I download my product without the CD files

  I bought the design Adobe CS6 and premium and I need to download my product on my new laptop computer, however I don't have the CD came it with my purchase. How can I download my product without the CD files

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• I have CS5 on my old macbook pro, I need on my new laptop computer. I can't find the css of the installation, but I have the code. Download somewhere? or transfer it from one computer to another?

  I have CS5 on my old macbook pro, I need on my new laptop computer. I can't find the css of the installation, but I have the code. Download somewhere? or transfer it from one computer to another? and I've never used a forum before, help!

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• HP laptop computer 635: need driver for wireless router

  Hello. I had to replace the hard drive of my laptop computer and a new operating system, Windows 7 Pro, after which it cannot connect to the wireless router. It's a router Westell A90-750018-07. I have a Tablet Android working on this particular router and want to download the driver on it and put it on the flash drive to reinstall on my laptop. Is that going to work? Where can I download it? FairPoint is now 14.99 an extra month of me now for a Support technique Premium. They are waiting for me to borrow a laptop to try to help him to do so. They seek to use the android on the phone, but it seemed to complicated with android as a third party. Will this work? Please if someone could help would be great. Thank you.

  You need the driver for the card installed in your 635 wireless. Problem is that you will know which card you have Ralink, Realtek or Atheros. The drivers are all posted on your support page:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5086540&swLangOid=8&swEnvOid=4059

  If you don't know what wireless card, you need to get the id of the hardware in the Device Manager. Right-click the network adapter, choose Proprietes.dans the window that opens click on the Details tab use the selector drop-down menu to choose the hardware id. After the first string of numbers - or at least the first half of the chain.

• Laptop computer donation should be deleted all the news

  I am donating my laptop and I want to delete all my info. but I don't know how please help!

  Reinstall Vista and back to the way you bought it.

  As we don't know what you have in the way of media/recovery partition, here's the General methods:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Have 2 pc windows 7 (desktop and laptop computer) and I want to use the password on the home network.

  I recently had to replace the hard drive in my desktop PC. After you have reinstalled, I set up the network to connect to my laptop. I created a password of the UAC on both computers.

  I activated ptected password sharing on two PCs.

  Now when I try to access the network on a pc, a dialog box asks me to enter the network password.  I walked into the UAC password erro and to get that connection is not valid.

  If I disable password sharing each PC is visible to another on the network.

  I prefer to use password protected sharing just as extra protection.

  I must have a parameter simple activation/deactivation.  Can anyone help.

  Hello

  You have a homegroup Setup?

  If you have a configuration of homegroup, I suggest that leave you the homegroup and set it up again.

  Create a homegroup

  http://Windows.Microsoft.com/is-is/Windows7/create-a-HomeGroup

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  I suggest you to change a homegroup password and check if it works:

  a. open homegroup by clicking the Start button, click Control Panel.
  b. type homegroup into the search box, and then clickhomegroup.
  c. clickchange the passwordand click change password.
  d. type the new password you want to use (or accept it suggested), click Nextand then click Finish.

  After you change the password, all connected to your homegroup will ask you to enter the new password.

  For more information, please go to:
  http://Windows.Microsoft.com/en-us/Windows7/change-a-HomeGroup-password

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way#section_1

• Laptop computer will not be connected to the internet.

  Never had a problem with my laptop (windows 8, toshiba) until today. It's only a couple of months. I tried to connect to two different WiFi my laptop disconnects and say that the network is 'limited' I have other devices connected and know the WiFi is fine. When I plug my laptop to charge it is fine and remains connected. This isn't usually the case. What can I do?

  Hello

  Don't forget to update the drivers of network, as indicated below.

  Check with support of the system, their drivers and documentation online manufacturer and ask
  in their forums on known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ---------------

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 2000: I have a Hp laptop computer 2000 I don't know the password for the bios the error I get is the following code.

  I have a Hp laptop, 2000 but I neeed to access the bios and I do not know the password the error I get is the following code.

  85280672

  Help

  Hello

  Come in:

  30188274

• I can't update my 7670M amd to my dell laptop computer inspiron drivers 5520

  So, as mentioned above, I can't update, he says always that this type of hardware found, but Dell drivers are supported on the work, the only thing is I want to update my drivers! can I do?

  Hi Afaran,

  Drivers available on the site are tested to work with the systems supported and only then released for downloads. These drivers on the support Web site are customized for Dell laptops and are always those recommended for the hardware on computers dell laptops.

• Computer does not start to install the full version of windows 7.

  I have a desktop HP Pavilion elite M9000T computer.  He is currently under Vista 32 Bit.  I'm trying to install Windows 7 64 bit. full version.

  When I restart the computer with the instilation disk in the CD/DVD drive I have a message to Press any key to restart with the CD/DVD drive. Hit any key does nothing and the computer starts his habit.

  (Go to boot at startup options does me not an option for the CD/DVD drive).

  Could you tell me how to get the computer to boot correctly to install the Windows 7 software?

  Clear the CMOS. Now start with the installed DVD and press the ESC key on the blue HP screen.  You get a boot device selection menu?

• for hp laptop d008se, boot usb drive not in the sequence of boot in the bios!

  I have purched a HP Notebook Laptop (HP D008se) model with Win 8.1 only language X.64 bits.

  I want to boot from a USB key, I went to the bios by(ESC+F10) and went to the boot order, but there is no USB drive

  only (hard USB, CD/DVD, network, the OS Boot Manager), ok. I did the last Boot order

  I put my USB Bootable and press ESC, but my Flah is not in the list.

  Please, could say one met my, what I can do to boot from My USB, and is this model not supported USB bootable... it will be a problem for me!

  Spoiler (Highlight to read)

  

  

  Press the power button then immediately press the ESC key to access the boot menu choose the F10 key to enter the BIOS. Click the System tab and then click start options.

  In the start options, enable legacy support option.

  

  

  Press F10 to save changes and your computer will restart.  Make sure that the USB is connected to a usb port. Now you should see the USB in the selectable start options if it is indeed a boot device.  If the USB was not bootable you still not see in the list.

• Using a LAPTOP computer and external drives to implement infrastructure ESX4 &amp; vsphere.

  Hi, people.

  Not been not not possible for me to acquire a robust and compatible to get by under ESX 4 Server (physical space at home, so many components niggle and not much more money to spend in), the only way that I would have to set up about 5/6 of the virtual machines in a field of messaging infrastructure running ESX4 in a portable high power (on the quad-core i3 / i5 or i7 processor) at least 6/8 Gb. RAM enough to satisfy my needs and requirements of the virtual computer.

  However, there is another parameter to be considered: external drives for execution of VMFS file systems, because modern systems (Sata, Pata, disks etc. interfaces) are not compatible for loading system; No virtual machine are taken care on them and, in case of, the performance will never good if each of them was running at the same time.

  The previous ideas must do some open and helpful (I'm sure they will) thoughts and advice:

  (1) has (or had) everyone feels with ESX4 in a processor of high power like the kind of I mentioned earlier? What has the vendor/model and material?

  (2) in the case of, how do you solve the question about to running 5 or 6 external drives for disc not computer usb virtual (AFAIK, ESX3 doesn´t support of USB drives)? NAS home (for example, LinkSys NAS200) is not enough to implement my desired purposes?

  (3) in my situation, the need of presentations good getting on ESX 4 and practice to get VCP certified, what has been your best idea in a hardware platform with space for?

  As usual, I'm very nice for your answers and advice.

  Andy.

  What you need to do is really not possible for a laptop - since it is a home network, I would look to get a whitebox - check-vm - Help.com or http://ultimatewhitebox.com/ sites dedicated to helping people like you looking for a box of cost effective to run reliable ESX -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• laptop computer Inspiron 7720 5720 motherboard

  I'm doing the repair of computers as a hobby of sorts and I recently had an inspiron 5720 to work on. After a few edits, that I have determined that the BIOS chip is bad, as if the laptop turns off then it takes repeated attempts to anything other than once the bios loads and get you into windows you are fine. Well the good guy gave it to me because I do so much work for him and I really like it, but I soon discovered the empty hard drive Bay, and how I couldn't use it and why (because the 5720 and 7720 use the same chassis). Well now, I want the 7720 and graphics from nvidia with the 2nd hard drive and I was wondering if I could buy a motherboard 7720 and put it in my case 5720. Can I do it? It will be just ' drag right into ' or will there be unforeseen problems? Someone at - it atteppted this? Any information would be appreciated.

  I'm glad that someone finally posted this info. I'm trying to return my board 7720 first because she would not engage in my 5720. I was hoping, and sure enough it's a bad Council 7720. Now I'm almost certain. Have you ever done 3D or 3D work? I wonder if it will fly on the screen of 5720 because there is a difference. Any other e advice? I have a 2.4 chip i3, but I think it should work for now. In any case thank you for the info and any updates would be great. ADMIN NOTE: identification of Email deleted by privacy policy >