for hp laptop d008se, boot usb drive not in the sequence of boot in the bios!

Similar Questions

• USB drive not readable on the Satellite A665-13W

  Hello

  I have the following problem. I have Kingston DataTraveler HyperX 64 GB (USB 3.0) by car and it is perfectly readable on other PCs without worrying if I connect it to the USB 3.0 or USB 2.0 ports.

  The device is detected in Windows 7 64-bit on Toshiba Satellite A665-13W and I see it in Device Manager. He invites me to open the disk E: (NTFS volume), but it looks empty when I open it in Explorer Windows with a certain delay when Explorer seems to scan drive.

  I see some errors in the event viewer such as:
  Event ID 11: driver has detected an error in the controller on \Device\Harddisk1\DR2

  But when I connect for example Patriot 8 GB USB drive it works without problem. When I boot Windows 7 in safe mode, the Kingston DataTraveler HyperX 64 GB drive is connected, and I can read it.

  What should I do to make it readable without going into safe mode?

  I have the latest BIOS 2.30, I tried to enable/disable USB legacy support, I tried the fast/normal startup, I tried to install the latest Intel Chipset drivers, I tried all USB ports, including one that can be used as eSATA port, but without success. I also uninstalled the recognized device driver and let Windows detect the device again and reinstall the driver, but also without success. I also disabled power management option to disable device, without success.

  When I start in normal mode, I can't read NTFS volume. When I boot in safe mode I can read. The USB works on other PC in normal mode. Old USB 2.0 USB key works in normal mode. Strange. It must be a firmware problem or driver in my opinion. If it is a hardware problem or device the device would not work in safe mode!

  Are USB 3.0 64 GB of storage devices that are compatible with Toshiba laptops with USB 2.0 ports?

  There could be a problem of compatibility between the USB controller and the USB key.
  This compatibility questions aren't unusual.

  But I m wondering if you could try to fix this in the other direction:
  First check to see if the USB flash memory stick would appear in disk management

  Panel-> management-> disk management computer

  Here you will see all the partitions on the HARD disk and the USB connected.
  Check if you can format the USB key once more.

  If the USB does not appear here, try this method:
  Start the console by typing CMD
  Then type the command: diskpart and press enter
  Now, type command: automount enable and press enter

  Now, close all windows and restart the laptop.

• USB drive not appearing is not in the T610

  I got a USB standard with some of the files it contains.

  The image that I use on the T610 is the last image (6.1.7601.279)

  In administrator mode, I am able to save and display the files on the USB key. In user mode, the driver installs successfully but I can't display the USB when I click on computers. I don't see the Z disk.

  I searched and found that I can turn on USB storage media or off in the registry. The value of the key is set correctly (3).

  Now I don't have what I can do to get this working.

  Any advice?

  Thanks in advance

  The user account has political explore to lock the profile - including what readers are visible.  In this case, the NoDrives policy is configured to allow only Z:.  Load the user registry hive, NoDrives to include the drive letter of your USB drive and unload the hive for the user.

• I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

  I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

  Please try to use different CD or simply remove the CD then insert again the installation request for the files.

• I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  Usually, by unplugging the USB device and plug it in then that she return to should force Windows redo the settings.

• Got a laptop as a gift do not have the disk that came with it. I I get it?

  Got a laptop as a gift do not have the disk that came with it. I I get it?

  On Saturday, July 19, 2014 17:26:38 + 0000, Ramiboca wrote:

  Got a laptop as a gift do not have the disk that came with it. I I get it?

  Probably no disk came with it. Instead, you have a recovery partition.
  For information on how to use it, read the instructions or watch on the
  web site of the manufacturer.

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Windows95 CD-ROM - game Need for DCC Speed-No. pieces found - can not install the game - please help. ___

  Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.

  ------------------

• When you connect 1 or several external USB drives, why is the letter a * shoot?

  When you connect 1 or several external USB drives, why is the letter a * shoot? Referencing external drives through library (Windows V7) becomes a really shiny, totally useless feature without consistency of drive letter. Or unnecessary to be a design goal? I almost had it still works but who finally to 3 minutes). What it will take to make useful new features?

  Windows assigns the first available on the first hard drive connected and one drive letter to another and so on.  Always has, always will. What will help sometimes (but), is to open disk from an elevated command prompt management and adversely affect permanent a letter from your external drive which is much higher than the letters in use.  This will often allow the will to keep a letter.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• Satellite L310 - I can not enter the Bios settings

  Dear team,

  I have a toshiba that is always on warraty.
  Is there anyway you can help me.

  It ceased to operate effectively. It does not exceed the Bios.
  By that I mean you reach the Bios screen, but you can not enter the Bios settings.

  Details
  model: toshiba Satellite L310

  What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
  The BIOS is secured by password or what?
  You see a splash screen of Toshiba for short time?
  Is it possible to start the Windows operating system or to recover the laptop?

  Please publish more details!

• My sm bus controller and controller USB driver not there (read for detailed explanations)

  I have a laptop, it was windows 8.0 and I upgraded to 8.1, I didn't like it at all so I lowered it to win7 because it was laggy and the displayed text was fuzzy. I knew that something was wrong with the installation of windows 8 and even after a clean full format, he would not return to normal. I went and he downgraded because I had enough and know that windows 7 would be faster for this pc (which it was), I said yaay sound much smoother and faster with no problems.  Then I installed all the wifi, bluetooth drivers, mouse etc... only 2 things that I couldn't install was the bus controller SM and USB bus controller driver (USB). And my usb slots were not working other than port 3.0 I had a plugged usb of decommissioning...

  I know its something to do with the bios and since the update of the bios is 8 - 8.1 windows only I don't know what to do... I have a .wim file recovery and I don't know how to use it. I also forgot to put my product key of my pc of win8 before I went down I had no knowledge of what happen and don't think it would be a problem...  Now I can't connect more than 1 thing at a time. I went on the microsoft forums and they fixed a problem (ethernet driver) and told me to come here and I hope you can fix the rest.

  Thanks to adnvaced for your help

  The laptop is HP Pavilion Sleekbook 14-b006au
  Serial number: 5CD2490Y40
  Product number: C7D41PA

  Please can someone help me I really want to stay under windows 7 is it possible that someone could get an update of the bios manual for that laptop or something like that. Except that everything works fine!

  Here's a linnk to MS32 (computers)

  http://1drv.Ms/1u6Z6DP

  Hello:

  Here are links to the drivers you need.

  1 SMBus: Downloand unzip and manually install the driver for smbus controller I have attached under attachments below.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  2 USB3: Download and install both of these drivers and restart.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_137148_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Laptop HP 15-r033TX: did not find the driver wifi for my laptop to windows 7 64 bit

  Hello

  I need help. I did find the driver wifi for my laptop for windows 7 64 bit. Can you send me a useful link.

  Thank you

  Hello:

  Here is the link to the wireless card driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0005

  You will also need the bluetooth driver...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• El Capitan - Ext. USB Drive not mounting

  Since the upgrade to El Capitan, I have not been able to access my external USB drive. I read the other posts about this problem and none of their solutions worked for me. Through repeated trial and error, I came across a solution that allowed me to access my USB drive in El Capitan. By attaching a USB hub to USB port and your device your drive should become accessible. Depending on what type of car you join you may need a powered hub. I enclose a mSATA drive to a hub powered and well.

  Hi Bob, there.

  Looks like you're having connect your USB drive to a hub so that it works with your computer. I would reset your PRAM then your SMC in this order:

  How to reset the NVRAM on your Mac.

  Then:

  Reset the management system (SCM) controller on your Mac.

  If the problem persists after that I have would then start in safe mode to clear some system-level caches and perform a disk check and repair if necessary:

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  Once you log in safe mode, reboot normally and try again the reader. Thank you for using communities of Apple Support, let us know how it goes.

• Satellite L300D will not recognize USB drive, except if the WIFI is disabled

  I have a venerable L300D Satellite under Vista SP2. I also have a Fujitsu 40 GB SATA HDD of my old laptop in a USB2.0 caddy, with double USB plugs to require more current.

  I can sign in successfully caddy USB to my laptop Windows 7 via a simple USB port on a USB 2.0 so I know it works.

  On the Satellite L300D, it implements the Generic USB drive in Device Manager, but does not record the 2 disk partitions in the storage of files in Windows Explorer. In fact when you try and expand the COMPUTER in the Explorer it times out.

  I noticed that the WLAN (Realtek TL8187B) is on the same USB 2.0 controller, so I disabled it. It turned off my wireless, but immediately the Windows Explorer was shot in life and I could access partitions (D:, and G :) may even run the check disk (no failures) and Defrag. As soon as I turn ON the WLAN driver disc fails to register.

  I've updated the Realtek drivers on the Toshiba web site but I want a solution that allows me to use the disc AND the WIFI network at the same time.

  Someone at - it ideas?

  Hello Colin

  Have you started using your laptop with the original version of Vista that you got with your laptop?

  I use Toshiba laptops for a long time now but I've never noticed this issue although I use external hard drives and USB keys quite often.
  Since when did you notice this kind of behavior? To be honest, I can't imagine that this problem persists since the day where we as original recovery image is tested and something like that should not happen. Maybe some updates may be responsible for this.

  Trying to remove driver WLAN, reinstall the chipset driver and reinstall WLAN driver. After doing this test he has once again please and send feedback.