Laptop computer will not be connected to the internet.

Never had a problem with my laptop (windows 8, toshiba) until today. It's only a couple of months. I tried to connect to two different WiFi my laptop disconnects and say that the network is 'limited' I have other devices connected and know the WiFi is fine. When I plug my laptop to charge it is fine and remains connected. This isn't usually the case. What can I do?

Hello

Don't forget to update the drivers of network, as indicated below.

Check with support of the system, their drivers and documentation online manufacturer and ask
in their forums on known problems.

Toshiba - Forums
http://laptopforums.Toshiba.com/

Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

Toshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

Toshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

---------------

Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.

--------------------------------------------------------------

Control Panel - Network and sharing Center - solve problems

References to Vista also apply to Windows 7 and Windows 8.

Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?

Actually try updating your driver and disabling the network logon.

Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

Drivers and Microsoft - Windows 8 - Hardware
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Microsoft - Windows 8 - why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Microsoft - Windows 8 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

Download - SAVE - go where you put it - right click – RUN AS ADMIN.

You can download several at once however restart after the installation of each of them.

After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).

Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.

------------------------------------------------------

Make sure you know the details of connection to your wireless router - SSID and password.

You lose connection when you do and have to redo your logon.

Control Panel - Network & Sharing Center - set up a new connection or network

-----------------------------------------------------

And:

TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

Microsoft - Windows 8 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

Microsoft - Windows 8 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

-----------------------------------------------------

Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

Microsoft - Windows 8 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

    After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

    We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

    Can solve you?

    Sorry for my English.

    Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

  • PC will not stay connected to the Internet in the evening.

    (Moderator note: title was "network programs network networking Internet Web site Site Web Web Site URL")

    My Dell laptop that was purchased in March, 2012, had no problems to connect to the internet until recently.  Now it connects the morning, but stop connection from about 18:00.  Why is happening.  My router is Lynksys.

    Margaret,

    I guess that your laptop will connect to your wireless router.

    If your laptop loses connectivity each day at roughly at the same time (18:00), then the problem could be due to the interference of the networks your neighbor's wireless.

    There is a setting in your router for the channel to use for traffic wireless (channel 0 to 11).

    If you can find this setting, then change it. The best channels to use (with less interference) are 0, 6, and 11. Your router is probably set to one of these three (but can be assigned to any channel between 0 and 11). Change the string parameter (and try 0, 6 or 11... that we're different from the one that is currently in your router).

    If you can't control the settings of your router, try to do a google search on the brand of your router (linksys), model and word settings... you should be able to find a description on how to change the settings.

    If you want to get into more technical details, use the free utility called inSSIDer... it can be used to see exactly what interference your wireless router is your neighbors... to help see you in the selection of a channel which is not used by your neighbors.

  • iPhone will not stay connected to the internet?

    * Posted on MacRumors forums but no answers *.

    So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

    Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

    I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

    Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

    I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

    I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

    I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

    One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

    Hi pinkdolphins0400,

    Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

    The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

    If your iPhone, iPad or iPod touch connects to a Wi - Fi network

    Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

    Recommended settings for the WiFi routers and access points

    For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

    The backup of your iPhone, iPad and iPod touch

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    Restore your iPhone, iPad or iPod touch from a backup

    See you soon!

  • Computer will not stop connection at the start of the neighbor

    I just build myself a new computer a week ago, and for some reason it keeps any connect to my network neighbors whenever the computer wakes up or is turned on.  I tried several times to remove the network of my favorite networks and I have it configured to automatically connect to my network.  But still, it connects to theirs.  I did not have this problem on my old computer, any suggestions?

    Right-click on the connection and say 'forget this network' so he knows no more.

  • Windows 8 will not automatically connect to the internet

    Have a new laptop with Windows 8, and although all of the checkboxes are checked for connection automatic wifi to internet I always have to do it manually.  Reset the computer laptop back to factory settings and started from scratch but still the same problem.

    Has been of any help.

  • The computer is not automatically connect to the printer

    Sorry, I don't know exactly where to put this question, looking for any help I can get.

    Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

    Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

    Original title: thing of strange network printer

    Hello

    Method 1: Run the network troubleshooter, and see if it helps.

    Using the network troubleshooter utility in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    I suggest you perform the steps described in the article:

    Printer in Windows problems
     
     

    See also:

    Why can I not print?

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    I hope this helps.

  • Windows 7 (pro?) will not be connected to the non - Internet

    Summary: We do a workshop where we have set up a private network that is not connected to the Internet. We have a fleet of laptops (11 of them) that connect through an open wifi router. The router provides DHCP, and there is also a web server and database on the network server.

    We have laptops with Windows XP and Linux, as well as the Chromebook and Macs. Connect regularly and reliably. However, we had three different Windows 7 laptops of three completely different companies with the same problem. They will connect at first, but then get into a never-ending display of 'limited internet access' cycle, disconnection and reconnection.

    All three of these laptops work very well on all other wireless networks. One of the laptops is Win7 Ultimate 64-bit (not sure the others). Now, this laptop used to work perfectly, but still has this problem. Some other Windows 7 laptops have worked in the past.

    Computers portable Win7 will connect and work very well with a wired connection.

    Then... It is not a problem with the router or the network, since any computer non-Win7 laptop works perfectly. The router is started fees at each workshop, and the problem persists, but * only * on some Windows 7 laptops.

    It is probably not a problem of drivers or virus, given that laptops work fine on other networks.

    We tried to adjust our network "Preferred" and "Connect automatically" in Win7 - no joy.

    Windows 7 has a certain logic that causes the disconnection of a wireless network if he does not have an Internet connection?

    Hello

    Thanks for posting your query in Microsoft Community.

    Your question is about the web and database servers, I recommend you to post your question in the Microsoft TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

    TechNet Forum

    Hope this information is useful.

  • WiFi problems; laptop computer will not hook up to interenet wifi enabled ping any other past failed test

    laptop will not hook up to wifi interenet is active ping test has not everything past idk what to do please help!

    If this problem started since the recent Win7 updates then: -.

    The KB2705219 update could be the cause and uninstall that solved the problem for some users.

    But...

    In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

    I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

    I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • Old computer reinstalled XP cannot connect to the internet. Could not find the iexplore

    I have an old computer.  I reinstalled Windows XP on it about 30 days ago.  I can't connect to the internet.  I bought 2nd hand computer and I bought my own version of XP directly from Microsoft.  I can't activate.  I can not even find iexplore.  Any suggestions?  I installed a driver for the ethernet card and still nothing.

    I've never dealt with XP MCE, but from what I've seen, you can get ambiguous messages during the installation process.  MCE was never intended for installation by end users; It came normally pre-installed on computers that have the necessary equipment to support additional features 'media '.

    It seems to me that if you have to start over.  First of all, you should get a prompt for "Windows XP Professional CD2" - who wants to have the second of the two CDs.  Then you should get a prompt for "XP Professional Service Pack 2 CD." In response to this prompt, insert the CD first back in.

    Assuming that work better than before, right-click on desktop and select Properties.  If the display shows service pack 2 - which I believe it will be - you only need to install sp3.

  • DV6Z will not Auto-Connect to the Wi - Fi connection

    HP Pavilion dv6z
    Windows 7 Home Premium

    When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

    Thank you!

    GP_01 wrote:

    HP Pavilion dv6z
    Windows 7 Home Premium

    When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

    Thank you!

    You don't need any software HP Connection Manager or Assistant wireless HP as for automatic wireless connection. Uninstall it reboot and you connect to the network using Windows network and sharing Center...

  • HP desktop computer will not automatically connect to wifi

    my hp desktop computer recently refused to connect to my wifi automatically, although he did years before. I have two laptops, an ipad, a blackberry bold and an ipod touch that ALL connect automatically. what the hell is happening?

    Hello

    1. don't you make changes to your computer before the problem?

    Follow these steps and check if the problem persists.

    Step 1:
    Update of your wireless cards and see if the problem still occurs.

    Step 2:

    In addition, you can uninstall and reinstall the Device Manager wireless network card to be a safer side.
     
    To uninstall the wireless device manager,
     
    a. Click Start, type device manager in the search box of start and press ENTER.
    b. Locate the network adapters and expand the same.
    c. Select the wireless connection, right click and choose uninstall.
    d. restart the computer, if prompted.
     
    Pilots should settle automatically after the computer restarts.

     

    Now you can install the latest wireless drivers and check if this solves the problem.

    See also:

    Why can't I connect to the Internet?

  • The new update will not be installed. I get an error message saying the validation could not do to not be connected to the internet, I'm always on the net about other applications.

    LLE iOS not install, get error message says that me due to the EIB Internet posting had no place. I'm always connected to the Internet with my phone in wifi. I tried just using the data in the cell and the same message occurred. I have this problem a wide and is there a fix in the works

    It is a known problem because Apple has released the iOS 9.3 update.

    You have to wait for Apple to release a new version of iOS.

  • HP 15 laptop: If my system is connected to the internet and I use it for 5 minutes it will reboot.

    I really need solution to this urgent problem that gave me concern for some time, once I connect to the internet and I don't use my PC for like 5 minutes, it restarts itself and I will lost all my unsaved files and sound very bad I tried to scan I find the error, but in vain , so please I need a solution to lastin' to this... Thank you in advance. SaiTech.

    I'll be happy if this has been solved, e-mail: [personal information]

  • Computer seems to be connected to the internet but cannot access web pages

    It says its connected to the internet and it can download the automatic updates, but when I open internet explore or mozilla or browser accesses a web page.

    The problem does not change if it connected to a hard line or wireless.

    The computer is a Latitude D620 on windows xp, if that helps.

    What happens when you try?

    Have you tried resetting IE?  (Tools |) Internet Options | Advanced...)

    -B-
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

Maybe you are looking for

  • frequency DAQ USB issue (6211)

    Hello I'm a newbie when it comes to NOR and data acquisition. I bought a NI USB 6211 and connected a resolver with 400 Hz and ai1, ai2 (CSR) (sine and cosine signals). I also have the reference of the power supply connected to ai3 (differential) of s

  • Low yield after Win7Pro dv5-1125nr install possibly due to driver problems?

    After installing win7pro on dv5-1125nr with 2.1 for AMD turion g RM72 only get 1.9 cpu on the performance of the game. Active Device Manager and get the following: 1 (yellow bubble) unknown unknown device Device under other devices. Location: On brid

  • Need to download SP1 / SP2 from the web

    redone with windows installation disc * original title - I had to redo vista updates work, but have not shown any service pack 1 or 2. I can upload them to the site? *

  • Touchpad HP Pavilion DV6-6110us problem

    After a recent update, I can no longer use the square in the upper left corner of the touchpad to turn it off.  How can I re-enable this feature?

  • Cannot install MSUpdates automatically or manually

    I ran a FixIt MS to fix the component of windows update. It was found components Widows Update need to be repaired. I found myself with - where Windows Update stores data needs to be changed. How can we change Windows Update to the default Windows se