Laptop HP 2000: Please help with code

I have a hp and asked power on password or password administartion. The disabled system code is 55614723

Try entering the following unlock code:

40772305

Tags: Notebooks

Similar Questions

  • I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

    I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

    You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

    Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

    Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

    Gene

  • Please help with download. ?

    Please help with the download?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

    Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

    Please refer to

    Error 207 to "install Adobe".

  • HP paviilion 15 laptop: screen brightness please help ASAP

    Hi guys, my display brightness is not adapt a day ago not used for theres no etc system restore and when I press f2 or f3 theres no increase or decrease it please help im really in urgent need all my software are average date until

    Hi @DylanL,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15 HP Pavilion Notebook and brightness does not properly. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options.
    Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Sometimes just changing and selecting apply it and change it back solves this problem.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 8.  Please restart the laptop twice to make sure that all updates are completed!

    You can also try:

    In Device Manager, click the arrow next to display adapters to expand this category
    Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
    Select search automatically for updated driver software.

    The laptop must find and automatically install the updated driver
    Once the installation is complete, restart your laptop.

    Please let me know how it goes.

    Thank you.

  • Laptop HP 2000-365DX / rebuilt with Windows 8 / not able to connect to internet

    My son has filled our mobile home of all known viruses of human, and so I had to give up everything and reload the operating system.  I reformatted the laptop with my copy of Windows 8 (64-bit) on the computer and now I am unable to connect to wireless internet.

    When I go to the list of "other devices" in Device Manager, see the following (with the yellow exclamation points):

    • BCM20702A0
    • Ethernet controller
    • Network controller
    • PCI device

    So I guess that the drivers for network cards, etc. are not loaded (for some reason any), but when I try to install the drivers from the HP site, nothing happens.  I can't access the Internet for Windows to automatically update everything.

    Any help would be appreciated.

    Hi qkershner, welcome to the Forums of HP. When you reinstalled Windows, you use HP Recovery or have you installed on a different disk from Windows? If you did a cover of HP it would have installed all the drivers automatically. You would also have the opportunity to restore the drivers using this method: use of the Recovery Manager to restore the software and drivers (Windows 8)

    If not, the drivers for laptops, would be located here: Drivers of laptop HP 2000-365DX
    You will need to download the drivers from another source and bring it to the computer (ie. the thumb drive) to install. When you get your network drivers work, you can try the HP Support Assistant, which hopefully will automatically find the rest of your drivers: HP Support Assistant

    If you install the drivers, and you have problems with them grateful, you can delete items in Device Manager by clicking on them and remove them. Then on reboot I hope to be recognized.

  • Please help with javascript

    Hi all
    In my application, there is a colujmn in a table with the date field (calendar) and 2 other fields. The user is not allowed to enter later in the date field, I used a javascript script and it worked fine, but later I discovered that this works only for the future date, (not months or year) assume that, if the date is November 15, 2010, the error is thrown, otherwise if the date is October 15, 2010, error is thrown , for dates like December 10, 2010, December 10, 2011... error is not thrown, that is to say in the coming months and the year is NOT thrown.
    I used the code below:
    < script language = "JavaScript" type = "text/javascript" >
    function test (SAVE)
    {
    for (var i = 1; i < = 30; i ++)
    {
    "" var i1 = i + "";
    if(i<10)
    I1 = '0' + i;
    var datval = document.getElementById("f04_00"+i1).value;
    If (datval! = null & & datval > ($v ('P10_FUTURE_DATE')))
    {
    Alert ("You entered at a later date that is not valid.");
    document.getElementById("f04_00"+i1).value = ";
    document.getElementById("f05_00"+i1).disabled = true;
    document.getElementById("f06_00"+i1).disabled = true;
    counter ++;

    }
    on the other
    {
    document.getElementById("f05_00"+i1).disabled = false;
    document.getElementById("f06_00"+i1).disabled = false;
    }
    }
    if(Counter==0)
    {
    doSubmit (SAVE);
    }
    }
    < /script >

    If the incorrect date is selected, the first value in the column is disabled and the other columns fades.
    Another problem I'm facing here is the calendar does not close when you selected the value, I have to close it manually.

    Please help me with the code!

    Hello

    OK - you should check the settings on the report and the process.

    For each column in the report, check that reference parameters owner of the Table, name reference Table and column name of reference are executed correctly. Note that the reference column name must match the name of the column or the name of the alias, as defined by the SQL statement.

    For each process, make sure that the owner, Table and primary key column name are executed correctly - it should be the same for all processes in the form of tables.

    Andy

  • HP Pavilion P7-1110: Please help with editing after scanning

    I know how to analyze an element, but after that I scan I do not know how to edit. I have Micro Soft Word 10 and my scanner is a HP Officejet 4630. If you can please help and thank you.

    Hi Tadpolegreen,

    Thank you for answering my questions!

    I would recommend going by there how to scan guide Scan in Windows 7 with full functionality software HP for HP Multifunction printers. Select how to scan with the HP software and how to scan in the form of editable text (OCR), follow the instructions.

    I hope this helps!

  • Please help with my reader prs 505

    Hi thr,.

    Please help me on my prs 505 reader, the display got very light canoe even read the words correctly, what's wrong with it, please help

    Thank you

    Jeevani

    Hi Jeevani,

    Welcome to the community of Sony!

    Sony Electronics apologizes for any question, you have met with your product. A small number of E Ink devices, with specific display panels, can become sensitive to the discoloration of the display when a page is turned while watching in strong direct sunlight. Clear the display is only temporary and can be corrected by adjusting the angle of the camera to avoid direct light from the Sun and then a page turns.

    Also, try the steps on the below technical support article:

    http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1008817

    Thank you for your message.

  • Please help with if, then formula

    I'm having troble with so and so, please help. So here's my question, if E is less than or equal to 30, then multiply K by 12% and specify the amount of 12% at Mr. Merci for your help and please show me the formula.

    Do you mean something like this?

    The formula in the column N:

    = IF(E≤30,K*12%,"")

    You do not specify what you want if the value of E is > 30, so the formula here is nothing.  If you want something, then replace ' ' to the desired value.

    SG

  • Very slow Macbook Pro (2012), please help with report EtreCheck

    Hi all

    My Macbook runs very slowly, I tried a number of things suggested online but none worked. I recently went to a repair shop and they suggested it could be to do with the dataflex (not sure if this was exactly, but I remember it sounding similar.) They described as a hard drive to another internal component connection, sorry for the inaccuracy.) I have me am replaced, but this did not help either.

    I downloaded the software EtreCheck and I was wondering if someone could help me to make light of the report on possible solutions? I have the feeling that it could be the hard drive needs to be replaced, but have no evidence of that. Verification has been run for the problem of "Beachballing" and got the sub report, please let me know if more info would be helpful. I hope it's telling in a way!

    Thank you for the pointers.

    EtreCheck version: 2.7.8 (238)

    Report generated 2016-01-26 22:56:56

    Download EtreCheck from http://etrecheck.com

    Duration 10:23

    Performance: Poor

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Beachballing

    Hardware Information: ⓘ

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [Warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 420 - SN = 9G22603YVD3MB

    Video information: ⓘ

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    Software: ⓘ

    OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour

    Disc information: ⓘ

    Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

    EFI (disk0s1) : 210 MB

    Macintosh HD (disk0s2) /: 499,25 go-go (248,48 free)

    HD (disk0s3) [recovery] recovery: 650 MB

    OPTIARC DVD RW AD - 5970H)

    USB information: ⓘ

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information: ⓘ

    Apple Inc. Thunderbolt_bus.

    Guardian: ⓘ

    Mac App Store and identified developers

    Launch system officers: ⓘ

    [failure] com.apple.maspushagent.plist [details]

    Launch system demons: ⓘ

    com.Apple.Security.syspolicy.plist [failure]

    Launch officers: ⓘ

    [loading] com.google.keystone.agent.plist [Support]

    [loading] com.oracle.java.Java - Updater.plist [Support]

    Launch demons: ⓘ

    [loading] com.adobe.fpsaud.plist [Support]

    [loading] com.google.keystone.daemon.plist [Support]

    [loading] com.oracle.java.Helper - Tool.plist [Support]

    Items in user login: ⓘ

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Other applications: ⓘ

    [ongoing] com.etresoft.EtreCheck.85920

    Plug-ins Internet: ⓘ

    FlashPlayer - 10.6: Version: 19.0.0.226 - SDK 10.6 [Support]

    QuickTime Plugin: Version: 7.7.3

    Flash Player: Version: 19.0.0.226 - SDK 10.6 obsolete! Update

    Default browser: Version: 537 - SDK 10.9

    o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Support]

    googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Support]

    JavaAppletPlugin: Version: 25 check the version of Java 8 update

    3rd party preference panes: ⓘ

    Flash Player [Support]

    Java [Support]

    TeXDistPrefPane [Support]

    Time Machine: ⓘ

    Time Machine not configured!

    Top of page process CPU: ⓘ

    6% update_dyld_shared_cache

    4% WindowServer

    3% kernel_task

    mdworker (3) 2%

    1% launchd (4)

    Top of page process of memory: ⓘ

    508 MB com.apple.WebKit.WebContent (4)

    502 MB kernel_task

    Safari of 283 MB

    Finder 197 MB

    152 MB softwareupdated

    Virtual memory information: ⓘ

    988 MB of free RAM

    3.03 GB used RAM (750 MB cache)

    Used Swap 0 B

    Diagnostic information: ⓘ

    26 January 2016, 21:59:30 self-test - spent

    Hello mrdivorce,

    It looks like of course as evidence of a hard drive failing for me. Hard drives 2.5 "in the MacBook Pro tend to fail after 2-3 years. Judging by the date on your MacBook, I think that your time is up. Maybe try to find a different repair store. Looking for Service Center authorized Apple (https://locate.apple.com/).

    I suggest upgrading to an SSD and increasing your RAM too. Then you have the hardware to run the last OS X 10.11.

  • Please help with reset the time lock

    We have problems with our computer to lock if we are online, etc.  We need to connect back with our password to see what we were reading.  If the mouse is still for a few minutes, the computer will automatically lock the computer mode.  Can someone tell me how to set this time around so that it does not lock the computer after a minute.

    Thank you!!

    Hi jomabe,

    Thanks for posting of answers.microsoft.com with respect to this application.

    According to the information provided, it can be either parameter must be changed or the option of power setting could be revised in order to help you with this problem.

    For a change of setting screen saver, click on empty place on the desktop and select PERSONALIZE / screen saver - check if the waiting period is set for a time relevant to your operation or if it needs to be revised.  In addition, if the Logon Screen summary view is checked, it will ask login during the resumption of the activation of the screen saver.

    Another area that may be the result of what is living could be in the power Plan options.  To check if the power management options contribute to the problem, follow these steps to customize a diet plan to check whether components that can be going to sleep can be adjusted to your needs.

    How to customize a diet plan

    To customize a diet plan, follow these steps:

    1. Click Start
      type Power Options in the start search box, and then click Power Options in the list programs.
    2. Click on change settings for the plan under the plan.
    3. The parameters of change for the plan page, select the display settings and parameters of sleep that you want your computer to use, or click on change advanced power to change additional settings.
    4. Click OK, or click on save changes to save the changes.

      Ensure that the plan of the power that you want the computer to use is selected in the Power Options page.

    Pasted from http://support.microsoft.com/kb/935799>

    Make sure to consider change Advanced Power settings selected in the context of your current power plan to check if a network card, hard drive or other component can go to 'sleep '.

    Please let us know on this issue if it helps with the determination or help.

    Kind regards

    Debbie
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Please help with the problems of Vista SP2

    So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

    I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

    I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

    The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

    I tried to stop and restart all services BITS, etc. no luck.

    I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

    Help, please... I'm hopelessly lost and can not spend more money on this thing.

    Thank you!

    If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

  • Help with code 800401154

    I can't get my updates? all I get is error code 800401154 Please HELP

    Hi, Ray MrJoesmokeyBailey,.

    1. the updates you are trying to install?

    Step 1:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    Step 2:

    If you're still having problems, then try to run you can also try running the system update readiness tool and check if you can install the update.

    What is system update readiness tool?

    Hope this information is useful.

  • Please help with microphone and yahoo messenger

    my microphone does not work on yahoo messenger. any ideas please help thanks

    Hi razzle5150,

     

    We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

    1 when was the last time it was working fine?

    2. the microphone works with windows?

    You may need to set up your microphone for speech recognition. Please visit the link below to set up the microphone.

    http://windowshelp.Microsoft.com/Windows/en-us/help/c1f5740d-2b4b-4656-b8ee-c2b95264ebf21033.mspx

    Check that the microphone input level is set correctly, check out the link below to check if the value is correctly:

    http://windowshelp.Microsoft.com/Windows/en-us/help/dca6513b-B68C-400C-b786-dcfaaf956f7d1033.mspx#ECD

    Hope this information is useful.

    Let me know if it worked.

    All the best!

    Thank you, and in what concerns:

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for