Laser Jet Pro 200 Color MFP: cannot scan from 10.8.5 OSX system preferences

Similar Questions

• Laser Jet Pro 200 color MFP m2: yet another scan inaccessible victom!

  Like many people here, my HP Lj200 M276 Scan software decided to stop working. I have installed and reinstalled the software, running printing HP Scan doctor, arrested and and started WIA and practically everything else except the reinstallation of the operating system, but I stll get THIS...

  

  When I run the HP print and Scan doctor, I get the following results when you try to fix the scanner...

  

  What the HELL am I supposed to do now? I have already started, stopped and reset the WIA and depedant services without solution.

  Well well, after much experimentation, installation/uninstallation of drivers and to change network configurations, I found the solution.

  Do not use wireless!

  Going back through the history of my network, I realized that the last time that my scanner was working is when I got the printer connected to the router with a cat5b ethernet cable. So I released a port on my router, disabled the function the printer wireless and cable.

  Down and behind, the scanner software works! I can scan with the 10 Windows scanning program and the HP scanning software.

  The only explanation I can come up with, is the different network speeds, that my router supports. The wired devices run at 100Mbit, while wireless devices can be executed at 50Mbit. When I on the printer wirelessly, my computer has been connected to the router.

  When the software is run, he tried to scan, I could hear the scanner run. But to halfway through its operation the error jump upward. When I used another wireless device to scan from the printer, in this case a laptop, it worked without problem. Now that the printer is connected to the router matches the speed of the network from my computer and the printer and everything is good.

  Also, the laptop works also, so this suggests that software was delay due to the faster connection, before the printer to finish as long as the speed of connection of printers is half that of the computer.

  This is just speculation, but with everything that I've tried that sounds plausible. In addition, it's not like Support HP offered no solution, then this is the best I can find. Whatever it is, my scanner and the software works.

  Speaking of the HP support.

  Good on ya' guy to show once AGAIN how USELESS you are!

  Not a suggestion on one of the many posts I have contribited to how solve my problem. WHat than a forum of support if you do not have FICHUS ANSWER YOUR CONTRIBUTORS MESSAGES?!

• HP Laser Jet Pro 200 color MFP m276nw

  How do I change of printer cartridges?

  Here is a link that will help and guide you to replace the toner cartridge.

  http://support.HP.com/us-en/document/c03416779

  Let me know if you get it to work successfully, thank you.

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• Laser Jet Pro 200 M2 MFP color: stopcock on printer laser jet pro 200 alerts

  How to stop printing alerts "beep".

  Hi DerekNCR,

  Thank you for explaining that to me.

  I don't know why the printer is beeps sounds every time that you try to print. The printer should just do normal noises when printing or treatment, but not a beep sounds.

  You have the printer connected to a UPS power?

  I heard of this printers causing to make beeps sounds. Weird I know!

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  The printer has only Fax sound volume in the options screen to change. If you have a fax cable connected to the printer, unplug it to see if it is the culprit.

  • The alarm volume
  • Ring volume
  • Phone line Volume

  Please hold me.

  Thank you.

• HP Laserjet Pro 200 Color MFP: hp scan not installed (MFP HP Laserjet Pro 200 color)

  Hi all

  My "HP Scan" desktop icon has stopped working.

  HP 'Pring & Scan Doctor' might find the software on my laptop.

  As a next step, I uninstalled the software (scan).

  HP Smart install, I reinstalled the printer.

  However, the installation does not have the applicaktion scanner.

  How can I return to the scanning application?

  The printer works fine when it comes to printing.

  I use a wireless connection for my printer.

  Grateful for all the good advice!

  Hi @TobySweden ,

  I see that you are having problems with the scanning application not install via the wireless network. I want to help you solve this problem, but I will need some additional information to provide appropriate measures.

  What is the name and the product number of your printer? How can I find my model number or product number?

  There are a few models of Laserjet 200 series.

  Meanwhile, I would uninstall the printer software, download the latest drivers and software for Windows 8.1 and install it this way without the Smart Install.

  Have a wonderful day!
  Thank you.

• Laser jet pro 200 M276NW MFP: enlarge a picture on multiple pages

  I need (copy) and enlarge an image and make it so the image will be printed on additional pages instead of print on one page only, and ending up with only part of the picture. Is there a way to do this?

  Hello

  You will need to scan, save the picture, blow up and print, it will be printed on multiple sheets.

  Kind regards.

• LaserJet pro 200 color mfp m2: scan to email help

  I'll have one creating problem scanning the e-mail account where I type in his or her email account information get where the person can go to the all-in-one machine and scan a document that comes from the e-mail account of the person.  Both we have a g-mail account and I have mine set up without problem, but can't seem to set up account of this person correctly. He said, there is a problem of name and user password (which it does not exist... or I do not think there is...) I mean I've logged on to this account with the same information and it allows me to this account g-mail without problem. I even deleted the information and he re-admitted) where it says there is a problem of smtp.

  What I'm typing:

  Your email address: I type in the e-mail [email protected]

  Full name: I type the name of the user

  SMTP server: smtp.gmail.com

  SMTP PORT: I tried a lot of different numbers.  Mine has worked with 25, but I also tried 587 and 465.  I do not know how to find the person's e-mail accounts that SMTP port number.   I also leave the box blank.

  SMTP user ID: I put only in the first part of the e-mail address, the omission @gmail.com

  SMTP password: enter the password for the e-mail account

  Any ideas on how to solve this problem? I do not understand how mine worked and this one does not.

  Hello
  Gmail recently changed several security options that can block the printer to connect to their servers.

  First, open the following link and ensure that you are connected to the same account that you define for the printer.
  https://myaccount.Google.com/

  Within the signature in section check that '2-step audit' is defined as 'Off', so make sure that 'Access to less secure applications' is defined as 'Authorized', otherwise, the verification fails.

  Within the activity recent section click on "Devices", if you see a blocked the connection attempt (it will be highlighted in red) click Yes, and then follow the steps in allowing access for insecure applications...

  Once you are running a test for the outgoing user profile and check if the problem resolved.

  Kind regards
  Shlomi

• Laser jet pro 100 color mfp software m175nw will be not install

  In preparing to install the scene until I connected the printer, I get 85% on the blue bar of extraction: ERROR, a problem occurred during the preparation install the software on your system. Restart your computer and run this installer again. If the problem persists, please visit the product support for your product.

  I've been through the suggestions, including the download of the latest version of the software, verify that the printer spooler is running and in automatic mode - nothing works. I ptinting urgent jobs to do and it's frustrating!

  Hello

  I had this problem just today. It took me awhile, but I did the job.

  First, I changed the manual print spooler (in services.msc).

  I then ran msconfig. Went to the services tab and check the box to hide all Microsoft Services and then I disabled ALL of the remaining services, saved and restarted.

  I ran the software as an administrator and it worked.

  I think that the essential is the stage of msconfig, but I did everything I listed above.

  I'll install it and then change everything back to normal.

  Hope this helps

  Douglas

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.

• Laser Jet Pro 200 M251nw Passw: Laser Jet Pro 200 M251nw password

  Laser Jet Pro 200 M251nw password can help you please, I tried all the known password I know but I still does not work. can you please help...

  DD955

  Hello @DD955,

  Thank you for showing your interest in the HP Forums! I see that you need the password to reset the printer. I can help you.

  I can send you this information in a private message.
  In the forum next to your name to handle just click on the envelope
  to see it.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• Urgent: HP LaserJet Pro 200 Color MFP M276

  Heeeeeeeelp! Urgent!

  I am looking for the software and driver for HP LaserJet Pro 200 Color MFP M276.

  To the HP Web site, there is no download available.

  Who can help me with a link downlod?

  [Personal information]

  Hello

  Download the software on the HP site is fully accessible, I downloaded it without any problem at all right now.

  The following lik select your operating system and click on send, and then click Download for the full feature software and drivers:

  http://support.HP.com/us-en/product/HP-LaserJet-200-color-multifunction-printer/5097648/model/5097653/drivers

  If you have problems please specify what operating system you are using.

  Shlomi

• HP LaserJet Pro 200 Color MFP: HP LaserJet Pro 200 Color MFP M276n: low memory

  Hello

  my new M276n printer has memory problems. Printing over two pages are stopped with a notification of "memory". I searched this forum and found a 'temporary' solution (reset printer to default settings) and a stage of 3 mysteriously missing (deleted the message). This does not in the long run because after only 4 more printing, I have the same problem again. I don't print many, mainly Amazon returns labels and information. Reset or not, the information page shows 127MO 256 MB available memory. What is the other half serving?

  Issues related to the:

  1. is there a solution?

  2 can it help if I disable unnecessary features (fax)?

  3. can I disable fax? (If Yes: how?)

  4. is there a solution?

  Thank you!

  Restore the default settings is not usually serve the memory of a printer.  You need a cold reboot to complete this procedure.

  Cold Reset as follows:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-cold-reset/TD-p/5060955

  The video at the bottom of the first page is very useful.