Laptop keeps overheating after the last update
I run Windows 7 Professional 64 bit on a laptop Toshiba Satellite M505D. I went about four months without any serious problem; But starting yesterday my computer started to overheat. The fan does not turn to cool the unit until it heats up a lot (I would say between 80 and 90 degrees) and then must blow the hot air outside to cool the unit down. Restart the computer to reset the fan, but then after an hour or two the problem returns. I don't have this problem with Windows until the most recent update, which I believe was able to change a setting, there should not be and messed up my computer ACPI.
No idea how can I fix?
(And what if all you say is "check for dust accumulation," except for someone else.)
It is unlikely that an update can change the settings for the fan. This is something which is controlled by the driver provided by Toshiba and you will need to contact Toshiba on this subject.
The reason for the change in behaviour is probably a increase your processor load. Make a right click the taskbar, start the Task Manager, click the processes tab and click the button "show processes for all users. Process that consumes the largest percentage of time processor? How much is? What do you see when you click on the performance tab?
_________________________
If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.
Tags: Windows
Similar Questions
-
Phone keeps restarting after the last update
After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
HELP ME GUYS!Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data
Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformattingIf you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP
-
Monitor flashes after the last update of Windows
I use a newer computer that already had Windows 7 pre-installed. After the last update my monitor started flashing. It didn't happen in Mode safe and I could not diagnose any systemic changes that can occur. He also doesn't seem to be a problem with the refresh rate.
I ended up coming back to a restore point from before the update. The problem occurred after the following updates have been installed: KB2719857, KB2735855, KB2736233 and KB2741355. Someone knows that could have caused the problem, and if so do I really need?
All updates have been classified as '' Important '' that's why I didn't question them.
However, it seems that my monitor was kaput. It happened to be a coincidence that he begins to not just after a Windows update.
I thank everyone good help. I'll keep updating in mind suggestions, in case something strange happens in the future.
-
After the last update (December 15, 2015) to Photoshop CC (2015), at startup, the little splash screen comes up for a few seconds, then closes. Photoshop just never came up, and there is no error message from Windows (8.1, fully patched) or Ps. I look at startup in the Task Manager, I see Photoshop.exe come during these few seconds, then disappear. While the splash screen is in place, and briefly showing the msgs little progress, happens to one that says "shared components... Initializing." "whereupn it closes. Everything was working fine yesterday (before the update), and the update process actually all went well for a change, with no error message it is. The platform is a Toshiba Qosmio laptop, and as far as I see it, there is no update for the graphics drivers, etc. All other programs (including Ps CS6) work very well. Suggestions?
Hi kimmersly,
Greetings.
- Right-click on the icon and click on run as administrator, see if it works
- If it does not, then try reinstalling PS CC 2015
- Restart the computer, and then check again.
Concerning
Rohit
-
After the last update, the start photoshop it gets for minutes flashes.
After the last update or after you install the "fuse" CC, the start Photoshop it gets during the minutes flashes. You can't do anything until it stops flashing. It is impossible to work with him. Because there are times that even after you have opened the file it is as if I had something working and takes too much time to perform any operation. And displays an error message. keeps flashing and press 'ESC' to stop and get something. But still, he said, showing the cursor how had tried to open something in the background. One of the moments where I started Photoshop appeared to show two fields seemed 'user' and 'password '. I tried to remove and reinstall and nothing... still the same thing.
I installed a previous version of the application to not stop working. I expect a solution to the problem to reinstall the latest version.
S.O.: Windows 10
Hardware: Dell Inspiron 5421 - i7 / 8G RAM / Nvidia GT 730 M 2 G
Thank you
L.Roma
I don't think that's the problem. I solved the problem by using an earlier version, while the youngest is not corrected.
To install an older version I do the following:
1. open a creative cloud application
2. in front of 'Find Apps more' I click on "Applications" and change to "show other version."
3. I have local "Photoshop" and I click on the 'Install' button and chose an older version, in my case, I prefer "CC (2014).
4. wait for install and now I work normally.I hope this has helped.
Kind regards
L. Roma
-
It's a huge problem for people like me who work as a Publisher!
Just after the last update, first crash whenever I try to open it.
I have a mountain of laptop:
16 GB of ram
NVIDIA GTX 670MX
Intel I7 3630QM 2, 4 GHz
WINDOWS 7
If anyone has an idea please tell me...
At the moment I just uninstall first and will intall again through Adobe Cloud but I fear he will do the same.
Thank you
I reinstall first cc, but it did not work!
I've finally updated my graphics codec and windows 7 and it worked...
I guess it was because of the graphics card.
Thanks a lot for your answer.
-
How to remove Code condition on iwatch after the last update
How to remove Code condition on iWatch after the last update?
Hello
On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.
-
After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.
Hi Cbella, YouTube is generally used with an HTML5 player, who is a player who does not use a plugin video in MP4 format (for example, it does not use the Flash plugin).
Now, I based this assertion on Windows, Mac may vary.
Could you do two tests for me?
Test #1:
To verify which player you see (which does work), try a right click or Ctrl + click on the YouTube Player and check the "context menu" that rises. If it's the Flash, there will be a menu short, referring to the Flash on the last line. If you do not see that, if you get a regular menu of Firefox, it's probably the HTML5 player.
Are what player you?
Test #2:
If you open the following test page, which videos to play?
http://www.quirksmode.org/HTML5/tests/video.html
- The video "H.264/MP4" play?
- The video "WebM" play?
Thank you.
Also, you can check if your Flash plugin is up to date? You can use the site Mozilla Plugin check for this (please ignore the other plug-ins page wants you to update at the moment avoid making the situation more complicated):
-
Java plugin for Oracle hangs after the last update
As part of the requirement of the Oracle, we run JRE 1.7.60
To update firefox this morning and now the plugin is constantly crashing.Hello
Thanks for your reply, but I doubt that flash player is related to do with Java.
And the Java applet crashing in my browser, I guess, should not be linked to my graphics driver, especially since the only update that took place was an update of firefox.
In any case, Firefox for some reason any launches 2 additional tabs when executing the Java Applet (IE does not work). In the past, I'm used to close the first tab, since it contains nothing except an Oracle logo.
However, it seems that after the last update of firefox, if this tab is closed, it cause Java to crash.Therefore, do not close the additional tabs by the Java Applet. However, this has never happened before, do not know what has changed in the latest version of Firefox to make it happen now?
Thank you
-
After the last update of Fire Fox, made today, the 36.0.1, the "Keyword.URL Hack 0.4.0' version will stop working.
I tried to update the url pirate, but there is no new version...Hi reoz, could test you with the two "features Google" keyword search Options page: I'm lucky and search by name. Perhaps one of those is the specific method you need instead of Google generic.
-
users on android like me are reporting that Firefox crashes after the last update 35.01
BONES of Firefox crashes on android, after the last update 35.0.1 can you fix with a update guys please I use Hudl 2
Yes, sorry about that. Now, that should fix, we have released an update. Your device was basically downloading a generation for devices Android ARMv7 based instead of the Intel x 86 version.
-
After the last update on Wnidows 7 Firefox opens just a blank screen (black).
After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.
Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.
You can check if there is an update for your graphics display driver.
Try to start Firefox in Safe Mode by holding down the shift/Options key.
Disable hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
You will need to close and restart Firefox after enabling/disabling this setting.
-
Single-pass does not work for Web sites after the last update of firefox
Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.
Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.
You may need to exit Firefox and start it again before it takes effect.
A little luck?
-
New tab doesn't seem to work after the last update. Please fix this
After the last update, I was not able to open a new tab (if using the menu FILE > new tab or by pressing CTRL + T). I use windows 8.1 SL 64-bit. When I restore the old version, the new tab feature seems to work.
This problem may be caused by an extension that is not working properly.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.
I tried to reset firefox and search for similar problems, unfortunately found nothing.
It is also weird empty space before the address in the address bar
other extensions and addons seems to work very well.
Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.
Any difference?
Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.
Maybe you are looking for
-
How can I change the language of the system?
Hello Installation of the system, I chose the wrong language (in English) Now, I want to change in German. Thanks for any help René
-
I am able to LEFT click search and automatically open them in a new tab?
I know I can do this using the RIGHT click but wonder if there is any way to do it with a single click.
-
ThinkVantage System Update fails to install updates
Hello everyone I use the update system (SU) in Windows 7 x 64. I tried to update the drivers with it, but after downloading all packages without problem (with SU) and try to install, I get the message that no updates have been installed (SU displays
-
Question about Windows MultiPoint Server with VNC
Hello I work in a research laboratory and our scientists are running a large number of simulations with MATLAB image processing. What we all buy a computer powerful user and set up so that, up to 3-4 users remote access to the computer at any time a
-
Media Center works with Comcast (PACE) DC50Xu?
I use Windows Media Center on Vista with a tuner Hauppauge 1950, with a kit remote control Windows Media Center with a DC50Xu of Comcast (PACE). While I can see the TV via Media Center, I can't have the Media Center to learn the codes for the Comcast