Phone keeps restarting after the last update

Similar Questions

• Laptop keeps overheating after the last update

  I run Windows 7 Professional 64 bit on a laptop Toshiba Satellite M505D. I went about four months without any serious problem; But starting yesterday my computer started to overheat. The fan does not turn to cool the unit until it heats up a lot (I would say between 80 and 90 degrees) and then must blow the hot air outside to cool the unit down. Restart the computer to reset the fan, but then after an hour or two the problem returns. I don't have this problem with Windows until the most recent update, which I believe was able to change a setting, there should not be and messed up my computer ACPI.

  No idea how can I fix?

  (And what if all you say is "check for dust accumulation," except for someone else.)

  It is unlikely that an update can change the settings for the fan. This is something which is controlled by the driver provided by Toshiba and you will need to contact Toshiba on this subject.

  The reason for the change in behaviour is probably a increase your processor load. Make a right click the taskbar, start the Task Manager, click the processes tab and click the button "show processes for all users. Process that consumes the largest percentage of time processor? How much is? What do you see when you click on the performance tab?
  _________________________

  If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

• Creative cloud in a perpetual state of restarting after the last update

  Since the update of the creative cloud desktop application it has been time and again reboot on its own

  The activity stream and the Apps page have a loading icon until you restart the application

  I use

  Win7 Pro

  Intel i5-4430

  Here are the screenshots and a GIF of the error happening

  

  Hello

  I'll give you a few steps, you can try those and can also see the link below

  (1) uninstall Adobe Creative cloud application. https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  (2) go to public services, delete the folders of cloud (if not removed during the installation of the United Nations) Adobe Application Manager and Adobe Creative.

  3) go to the library to the user, delete the folder AAMUpdater and OOBE. (~/library/application support/adobe) (C:\Users\username\AppData\Local\Adobe)

  4) go to the library system, remove the folders AAMUpdater, AAMupdaterInventory, and OOBE. (/ Library/application support/adobe) (C:\Program Files (x 86) \Common Files\Adobe)

  (5) reinstall Adobe Creative cloud application. DOWNLOAD Adobe Creative Cloud apps | CC free trial Adobe

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

• After the last update on Wnidows 7 Firefox opens just a blank screen (black).

  After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

  Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

  You can check if there is an update for your graphics display driver.

  Try to start Firefox in Safe Mode by holding down the shift/Options key.

  Disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• After the last update of FF13, I double click on the bookmark button and the window does not open, so I can edit.

  When I double click the bookmark (star) button a window still down so I can change the bookmark or place it in the folder I want. Now, after the last update of FF13 (June 2012), I can click once and the page is a bookmark in the "home" folder, but when I double click nothing happens. (1) I restarted FF, did not help 2) I rebooted the computer, did not help.

  You just click on the star once if the star is high already turned on to indicate that a site is bookmarked. Normally, you would click once to bookmark the current site, then click once, if you want to change the new bookmark. If you double-click and you open and close the pop-up edition.

  After you enable hardware acceleration can cause problem with edit op - up doesn't work does not correctly, so in case of problems, you can disable hardware acceleration.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• iPhone 5 slow work after the last update

  My iPhone 5 works much more slowly after the last update (iOS 9.2.1).

  Increased delay time after pressing an application, multitasking is too slow.

  Applications like Facebook pull a little longer to open now.

  The 'Phone' application is slow processing, including a shift before recent update.

  Autonomy is greatly reduced and wears out quickly on 3G or wifi.

  I would ask if it is the same with each i5 user, making it a common problem or is it just with my camera?

  Also if there is a solution to this problem...?

  You must wait for the next update for iOS

• Faded voice and echo on calls after the last update

  After the last update that was available from the 11 calls the volume of calls is now low on the end of receivers and they also get an echo in. I called the help line and they suggested that I run a repair I did reset my phone, but that still has not solved the problem. They'll call back me Monday to see if the repair worked.

  What happens if you turn off the microphone noise suppression?

• Windows 7 Ultimate 64 bit freezes on startup after the last update.

  I think I have updated a major problem with the latest update from microsoft.

  I've been running windows 7 ultimate 64-bit for over a month now, as I received it for a launch party I was the host.

  That's all works fine but a few nights ago, he just stopped from upward, it just hangs at 'Starting Windows' screen, the windows logo does not yet appear.  He would not go into safe mode and startup repair couldn't do anything.

  This happened right after that I had installed a windows update, but I thought that nothing of all this at once, but one of my friends mentioned that their windows vista pc did the same thing after the last update, still, I don't think not that it was bound.

  I had no other way to get the things on my hard drive, so I tried to reinstall windows on top of the old, it does not work either.

  I gave up, I formatted the hard drive last night and just reinstalled.
  Microsoft Windows 7 Ultimate 64 bit,
  NVidia graphics driver
  Microsoft Security Essentials,
  Microsoft Office 2007 Ultimate,
  Apple's iTunes and Quicktime.

  The computer worked so very well, so this morning I came back to it, it was working fine, there was a box saying that a windows update was waiting to be installed, I clicked it, it was of course a big one because it was the first for this new install to get.  When he asked me to restart, I did, he went through his usual routine and now, as I sit typing this, I am facing screen "starting windows" frozen again.

  My processor is an Intel Pentium D
  I have 4 GB of RAM.

  There is obviously something wrong dangerously with the last update of windows, were there any other reports of this?

  Too, I recently had problems with Win 7 freeze on me. After you have uninstalled all the updates I had installed on 24 December 2011, 1 update could not be uninstalled and it was the update to sp1 of windows 7. After you have uninstalled all updates (except SP1 cause could not be uninstalled) I tried to play again the media and my system hang or aka freeze for a few seconds, and this happened even when I was gaming.  I had a lot of problems after that update, including any media type of videos to play just thrown music windows media player. After restoring my computer to a previous state (before that the updates have been installed) now my computer works normal again. So, for those of you having problems with windows and your way of thinking too yourself Uggghhh, why he did this? Well this is the service pack 1, windows now, I don't know any alternative to restore your computer to an earlier date before the updates took place, and if you don't have a win 7 is pretty smart and im sure they have a restore to the factory settings. These are the only options that helped me get rid of my system hanging up. I hope this helps some people and I'm sorry I can't guide you threw it and the steps how to restore your comp because of parameters factory all the comps are different.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Monitor flashes after the last update of Windows

  I use a newer computer that already had Windows 7 pre-installed.  After the last update my monitor started flashing.  It didn't happen in Mode safe and I could not diagnose any systemic changes that can occur.  He also doesn't seem to be a problem with the refresh rate.

  I ended up coming back to a restore point from before the update.  The problem occurred after the following updates have been installed: KB2719857, KB2735855, KB2736233 and KB2741355.  Someone knows that could have caused the problem, and if so do I really need?

  All updates have been classified as '' Important '' that's why I didn't question them.

  However, it seems that my monitor was kaput.  It happened to be a coincidence that he begins to not just after a Windows update.

  I thank everyone good help.  I'll keep updating in mind suggestions, in case something strange happens in the future.

• Bridge is no longer starts after the last update

  Hello

  After the last update of CC 2015.5 bridge will start is no longer. I get the window that shows that "Adobe Bridge CC unexpectedly quit' almost immediately. Of the window:

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x000000000000000c

  Note the exception: EXC_CORPSE_NOTIFY

  Have uninstalled and reinstalled. preferences ransacked without success. I am running the latest version of the operating system. CC of other apps that I use (PS, I, ID) seem to work. 5 Bridge works fine.

  Any help would be appreciated.

  Thank you

  Ted

  Hi all

  We published a new version of Adobe Bridge (CC 2015) on July 19, 2016. This update is available via the Adobe Creative Cloud application.

  We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

  If you are not able to locate the bridge (CC 2015) on the creative cloud application, you will need to update the creative cloud application and restart your computer.

  Thank you

  Deepak Gupta

• CC of Photoshop (2015) now closes to the boot after the last update (December 15, 2015)

  After the last update (December 15, 2015) to Photoshop CC (2015), at startup, the little splash screen comes up for a few seconds, then closes.  Photoshop just never came up, and there is no error message from Windows (8.1, fully patched) or Ps.  I look at startup in the Task Manager, I see Photoshop.exe come during these few seconds, then disappear.  While the splash screen is in place, and briefly showing the msgs little progress, happens to one that says "shared components... Initializing." "whereupn it closes.  Everything was working fine yesterday (before the update), and the update process actually all went well for a change, with no error message it is.  The platform is a Toshiba Qosmio laptop, and as far as I see it, there is no update for the graphics drivers, etc.  All other programs (including Ps CS6) work very well.  Suggestions?

  Hi kimmersly,

  Greetings.

  • Right-click on the icon and click on run as administrator, see if it works
  • If it does not, then try reinstalling PS CC 2015
  • Restart the computer, and then check again.

  Concerning

  Rohit

• After the last update, the start photoshop it gets for minutes flashes.

  After the last update or after you install the "fuse" CC, the start Photoshop it gets during the minutes flashes. You can't do anything until it stops flashing. It is impossible to work with him. Because there are times that even after you have opened the file it is as if I had something working and takes too much time to perform any operation. And displays an error message. keeps flashing and press 'ESC' to stop and get something. But still, he said, showing the cursor how had tried to open something in the background. One of the moments where I started Photoshop appeared to show two fields seemed 'user' and 'password '.  I tried to remove and reinstall and nothing... still the same thing.

  I installed a previous version of the application to not stop working. I expect a solution to the problem to reinstall the latest version.

  S.O.: Windows 10

  Hardware: Dell Inspiron 5421 - i7 / 8G RAM / Nvidia GT 730 M 2 G

  Thank you

  L.Roma

  I don't think that's the problem. I solved the problem by using an earlier version, while the youngest is not corrected.

  To install an older version I do the following:
  1. open a creative cloud application
  2. in front of 'Find Apps more' I click on "Applications" and change to "show other version."
  3. I have local "Photoshop" and I click on the 'Install' button and chose an older version, in my case, I prefer "CC (2014).
  4. wait for install and now I work normally.

  I hope this has helped.

  Kind regards

  L. Roma

• How to remove Code condition on iwatch after the last update

  How to remove Code condition on iWatch after the last update?

  Hello

  On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.

• After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

  After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

  Hi Cbella, YouTube is generally used with an HTML5 player, who is a player who does not use a plugin video in MP4 format (for example, it does not use the Flash plugin).

  Now, I based this assertion on Windows, Mac may vary.

  Could you do two tests for me?

  Test #1:

  To verify which player you see (which does work), try a right click or Ctrl + click on the YouTube Player and check the "context menu" that rises. If it's the Flash, there will be a menu short, referring to the Flash on the last line. If you do not see that, if you get a regular menu of Firefox, it's probably the HTML5 player.

  Are what player you?

  Test #2:

  If you open the following test page, which videos to play?

  http://www.quirksmode.org/HTML5/tests/video.html

  • The video "H.264/MP4" play?
  • The video "WebM" play?

  Thank you.

  Also, you can check if your Flash plugin is up to date? You can use the site Mozilla Plugin check for this (please ignore the other plug-ins page wants you to update at the moment avoid making the situation more complicated):

  https://www.Mozilla.org/pluginCheck/