Laptop works fine but too slow. In Windows XP Safe Mode I get error "" multi (0) disk (0) rdisk (0) partition (1) \... "." ».

Similar Questions

• multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\DRIVERS\isapnp.sys

  My laptop does not start correctly.

  In a normal boot, the screen flashes the dell logo then turns off.

  It will start using the f12 key for a menu that gives the following options: drive HARD internal, CD/DVD/CD-RW drive, configuration of the BIOS, Diagnostics

  OR to the Windows Advanced Options Menu:

  If I select Safe mode it tries to start then stalls on which seems to be to halfway through the config/sys.  The last element that appears is:

  multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\DRIVERS\isapnp.sys

  I can hear the fan, ect always on and the screen is black with half of it filled with data as above and the but no activity.

  OK, when I run the "diagnosis" in the dell boot menu, it passes all the tests.  At the end a popup appears: "Dell Diagnostic Utility Partition boot" "Press any key to continue."  When I press on it all disappears them text and I get the blue screen.

  I'm online on my desktop now if I can respond immediately.  Thanks in advance for any help

  Maybe one day the "ask a question " of forums XP dialog box will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  This symptom often means that your system is of a malicious software.

  If you choose to start safe mode, and the last thing you see on the screen looks like this:

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\DRIVERS\isapnp.sys

  If your system hangs in Mode safe on the isapnp.sys file, you will need to search for a driver of zero-byte length file in the following folder:

  c:\Windows\System32\Drivers

  Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

  If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have, make a CD of bootable XP or Hiren Boot CD Recovery Console and do not forget.

  There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  Then you can access the folder and check to see if there is such a suspicious file and take action.

  Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

  c:\Windows\System32\Drivers

  Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

  If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

  dir *.sys

  Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

  If you use the Mini Mode XP a Hiren s boot CD (which works as Office XP), just navigate to the folder of the my computer desktop icon and locates the suspect files.

  You really want to delete the suspicious file once you get running and you run some scans for malware, but if you are not sure what is the suspicious file, or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

  For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

  Rename zigxrtml.sys zigxrtml.bad

  Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

  The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

  Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

  Reduce the risk of malware by running some scans.

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I use Lightroom 4.4 on windows 8. Less than 500 photos on the catalog and the catalog size is currently at 2.16 GB. Lightroom works fine, but I'm taking a risk by leaving the catalog to grow beyond 2 GB?

  I use Lightroom 4.4 on windows 8. If I have less than 500 photos on the catalog, I do a lot of alterations and cleaning of the images and therefore the size of the catalogue is currently at 2.16 GB. Lightroom works fine, but I'm taking a risk by leaving the catalog to grow beyond 2 GB? Should I close it and start a new catalog? Thanks for your suggestions.

  Many local adjustments (brush strokes, spot healing) can have a huge impact on the overall size of the catalog because they are all saved as stages of the individual history and so I wouldn't worry - there is nothing wrong with your catalog. See my thread here since a few years back: which affects the size of the Lightroom catalog file? where Rob Cole usefully thought of it for me.

  You could delete the history if you wanted and that I'd be willing to bet that the size would be reduced considerably. That said, my catalog file is larger than 10 GB (as I do a lot of local changes as stated in the thread I linked to) and it causes no problem at all, apart from resulting in a backup of slow catalogue (my previews resume another 30 GB or more). I have not yet felt the need for the history of the Reformation, but doing so probably would increase my catalog to about 1 GB, so it's an option if size becomes a problem for me.

  My advice: continue anyway and don't worry in this regard.

  M

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014

  I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I pay for CC2014 I would use it. I tried to rename the "sniffer" to "snifferold" as bobmiller4002 has suggested, but the problem is not resolved. Lightroom works fine.

  Update your driver from the website of the manufacturer of the GPU video card to pick up the bug fixes that you are missing...

• Internet Explorer works fine, but other programs may not connect to Internet

  I have problems on my PC where, in updates of programs and windows try to connect to the internet, I get an error saying that I am not connected to the internet.

  My laptop works fine if my internet connection is not the problem.  Internet Explorer works fine however when I launch a program like steam, or when I try to download a patch to Warcraft or even Windows Update I get error messages saying that I can not connect.

  I tried to turn the Windows Firewall and antivirus off but still no joy.

  Run the Norton removal tool and see if that helps. Autour Googling shows a lot of links by using the keyword "uninstall Norton broken Internet Vista". Some people report success after you run the removal tool.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  MS - MVP - Elephant Boy computers - don't panic!

• I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error.

  I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error. I tried everything I could but to no avail.

  Hi Sheryl,

  more information is needed for a better response from the community.

  Here's a generic convenience store to try:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  B Eddie

• No sound on HDMI, image works fine but in the sound Manager tells me not connected HDMI

  Hello

  I have a 1050ez tm2 and having problems with my HDMI port.

  When I connect the screen gets automatically duplicated and everything works fine, but when I try to play a movie with vlc for example I get not all sound through the TV, only on the tablet.

  Of course, I went into the sound Manager, because I suspected that you specify the tm2 where to play the sound, but to my surpise, he said that the HDMI cable is not connected?

  I was able to make any changes to the default output device...

  Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged in and out several times without success.

  I hope someone can help me on what precedes, I already searched the net for several hours but havn't seen a similar problem, the more problems it shows as connected cable...

  Thanks in advance!

  Geen

  I wanted to just let know you it worked!

  I reinstalled the drivers, has not worked since the beginning, when I plugged the cable while the laptop was running, but after a reboot, everything worked fine. The hdmi port was automatocally standard value and disconnect after all is back to normal.

  Rgds,
  Geen

• I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. How can I solve this problem.

  I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please advise...

  I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for RDP

  I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
   
  2991 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  1:34:27.0000 03/01/2016 Z ServerTime
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
   
  2943 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  16:52:38.0000 02/01/2016 Z ServerTime

  
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  This issue is beyond the scope of this site which is for the consumer to related issues.

  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer

  http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home

  http://social.msdn.Microsoft.com/Forum

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

• router, still seems to work fine but cuts 2 - 3 times a day... losing attentive point when I unplug taken nd in it works again

  router loses acess piont 2 - 3 times per day... router works fin but have to disconnect and then return to work

  Hello

  If you are referring to a wireless connection to a wireless router, try this.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.