Similar Questions

• How to make a small virtual machine

  I have two virtual machines created with VMWare Workstation, which I'm running on another computer using VMWare Server. I need to send a colleague virtual machines, so it can debug problems that I pointed out, but virtual machines are simply too large. Each compressed (zipped) folder is 12 GB. I checked and the virtual disks are not previously affected - it says on the VMWare server. Change the disk option: "disk space is not preallocated for this virtual disk. Content of the virtual disk is stored in a single file. »

  I need to download the virtual machines and the process takes forever - I compressed the individual files and I'm trying to download the / 3GB zips one at a time, but it is still too slow.

  I checked the VMWare Tools | Tab Shrink and who is disabled with the message "Shrink is disabled for this virtual machine. Shrink is disabled for linked clones, parents of clones related, préalloués disks, snapshots and other factors. »

  Is it possible to do all of the smaller virtual machine file? I just want to share the virtual machine so that the problem can be reproduced and debugged... Best way to do this?

  Any help will be appreciated!

  I did this and was able to add the virtual computer to my inventory, start it and run "Shrink" of VMware Tools.

  He ran on the disks withou any error, however, the vmdk file size is the same as before you run Shrink: 16 GB. Is this correct? Does this mean that I can't not smaller than that?

  Assuming that Shrink in VMware Tools under VMware Server worked as it is supposed to...

  According to the vmware.log file disk hard virtual is a disc is 16 GB monolithicSparse (single growable file) and assuming that you used the option t 0 and not of t 2 when using vmware-vdiskmanager then if after a shrink operation is 16 GB in size at first thought I would say that the disc was full however consider what follows.

  How much free space is reported when you look at the properties for the C: drive in Windows Explorer (to the breast of the guest)?

  In General, the amount of used space is the size, it should be after a shrink operation.

  There are a few thing that can be done to help reduce the final size before shrinking...

  IIRC in Windows Vista, the system restore default to 15% of the size of the hard drive so purging the Restore Points could save as much as 2.4 GB on a 16 GB drive.

  Purge the cache of the browser (I.e. the temporary Internet files in Internet Explorer).

  Delete the contents of the file folder and C:\Windows\Temp.

  Disable Hibernation and delete the C:\hiberfil.sys (hidden by default) file because this file is the size of the amount of RAM to the virtual machine is affected.

  There is more that can be done which has already been mentioned however covers the main sectors that can decrease the shrunken size of a virtual hard disk.

• Best way to split the large partition to few smaller

  Hello

  I have Oracle 11.2 EE on Redhat 5.9 and I need to solve the problem with partitioning.

  A few tables of some system has been prepared for partitioning a few years ago. But no partitioning was done and all these tables / global index have only one partition for all data.

  Now, we have a lot of tables and indexes with a single partition (with limit MAXVALUE) for all data. I would like to divide this large partition to smaller partitions more by quarter of the year.

  Example:

  Existing partition that d0201_2008_1q must be split at D0201_2008_2Q, D0201_2008_3Q... MYTABLE_2014_4Q of column DATE/NUMBER

  I tried to generate a script for sharing partitions

  ALTER INDEX I_D0201 CHANGE DEFAULT TABLESPACE INDX_2008_1Q ATTRIBUTES;

  ALTER TABLE SPLIT PARTITION D0201_2008_1Q AT (1000456) D0201

  INTO (PARTITION D0201_2008_XX TABLESPACE DATA_2008_1Q, PARTITION D0201_MAX1) 16 PARALLELS;

  ALTER TABLE D0201 CHANGE THE D0201_2008_XX REBUILD UNUSABLE LOCAL INDEX PARTITION;

  ALTER INDEX I_D0201 CHANGE DEFAULT TABLESPACE INDX_2008_2Q ATTRIBUTES;

  ALTER TABLE SPLIT PARTITION D0201_MAX1 AT (1000547) D0201

  INTO (PARTITION D0201_2008_2Q TABLESPACE DATA_2008_2Q, PARTITION D0201_MAX2) 16 PARALLELS;

  ALTER TABLE D0201 CHANGE THE D0201_2008_2Q REBUILD UNUSABLE LOCAL INDEX PARTITION;

  ALTER INDEX I_D0201 CHANGE DEFAULT TABLESPACE INDX_2008_3Q ATTRIBUTES;

  ALTER TABLE SPLIT PARTITION D0201_MAX2 AT (1000639) D0201

  INTO (PARTITION D0201_2008_3Q TABLESPACE DATA_2008_3Q, PARTITION D0201_MAX3) 16 PARALLELS;

  ALTER TABLE D0201 CHANGE THE D0201_2008_3Q REBUILD UNUSABLE LOCAL INDEX PARTITION;

  ...

  It separates great score to two new partitions. One of them is the next quarter and secondly will separate again.

  Some partitions have a few GB and splitting takes a long time (hours for a split partition) and big disk space is also required.

  New partitions will be smaller, but first 2008_1Q partition size will be unchanged, and I'll need to reclaim the unused space somehow.

  You have a better/more rapid solution of ideas?

  Cardel wrote:

  I used DBMS_REDEFINITION once for the change not partitioned to partitioned table. But now, I have an existing partitioned table with a single partition and I want to do a simple process to divide.

  DBMS_REDEFINITION or EXPDP/IMPDP may be faster for execution, but a lot of time for preparation. I have aprox. 60 tables with some clues the and global.

  with DBMS_REDEFINITION, you have no downtime.

  ORACLE-BASE - Table online redefinition improvements in Oracle Database 10g Release 1

  DBMS_REDEFINITION.sync_interim_table

  ----

  Ramin Hashimzade

• How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send

  How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send.

  Hi kristieann,

  ·         What version of the operating system is installed on the computer?

  You can search for any third-party application, using your favorite search engine to split the recording file.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Icons on the homepage are larger than normal, how can I make it smaller. __

  my desktop icons are larger than normal, how can I make the smaller

  Right click on the desktop and click on views and there should be three options for selecting the size of the icons.  If they are too big, choose one of the smaller options and see if it suits you better.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

  I get the error message, well known in the VM library window "Bundle" & lt; pathname & gt; "" / Boot Camp/%2Fdev%2Fdisk0/Boot partition.vmware.vm Camp "is damaged and cannot be opened."   However, my problem is not solved by the solutions proposed elsewhere in this forum.

  At the bottom of this post, I listed my host config and invited desired config.

  Here is a brief history, followed by what happened when I tried the solution of WoodyZ published here.

  • I had Windows XP Pro SP2 on my Boot Camp partition, but somehow ended up 'inaccessible' SigmaTel audio device and the Leopard installation DVD could not repair it.  I imported this partition to Boot Camp in the Fusion as a virtual machine.  This virtual machine is now stored on the external hard drive in "/ Volumes/ExternHFS/_CCCnonBackup/virtualMachines/Boot partition.vmwarevm"+ Camp.»  This virtual machine still works when loading in the merger, but the sound does not work, nor made a called M-audio Transit USB connector.  That's why I decided to create a new partition in Boot Camp with a SigmaTel audio device cool.

  • There are Kubuntu and NetBSD virtual computers stored in another default folder: yangguizi/Users / / Documents/Virtual Machines /

  • Using wizard Boot Camp in Leopard, I erased my Boot Camp partition and then recreated with a new installation of Windows XP Pro SP2.  (By the way, I've formatted this partition in NTFS.)  This Boot Camp partition is the device of SigmaTel installed and accessible from the control panel.

  So I wanted to make a virtual machine of the new Boot Camp partition.  When I opened the merger, I highlighted the new Boot Camp partition down and clicked on the arrow of comments are starting to the right.  A window saying "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. "That window remained open for 45 minutes.  Finally, I closed merge by clicking the choice of menu to quit Vmware Fusion.

  Thereafter, whenever I opened the merger, I saw the message "Bundle" / Users/yangguizi/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmware.vm "is damaged and cannot be opened.' " next to the new Boot Camp partition.

  When I highlighted this new Boot Camp partition in the VM library and you press the delete key, absolutely nothing changed, that I could see.  Right click on the list of this score showed that the menu choice 'delete' is gray.

  Then I closed the merger, and then manually moving the file to the trash "/ Users/yangguizi/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp / '.

  The next time I opened the merger, a new icon for the Boot Camp partition has been displayed at the bottom, with the subtitle "Powered Off".  When I clicked on the icon start Guest, a new folder/Boot Camp / was created in the same place, and the never-ending open window showing "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. " Blah, blah, blah.  If the cycle turned up.

  I am at a loss what to try next.  Here are three assumptions about the problem:

  1. Fusion has been confused by the three communities during which I virtual machines.

• Fusion has been confused by the fact that I have, potentially, two virtual machines called "Boot Camp partition".  The older is actually a virtual machine hard disk external.

• When I installed XP in the Boot Camp partition, the external Firewire drive was running. Then installing Windows saw much more of partitions on which XP could in theory have been installed.  This may have confused merge somehow, even if I successfully installed XP on partition C, which was 32 GB.

Did fix you this problem?  Even if you haven't, what do you suggest me I try next?

Thank you, Yang Guizi

Host hardware: 17 "MacBook Pro; 2.33 GHz cpu; 3 GB of ram; Boot Camp 32 GB partition formatted in NTFS. external hard drive with Firewire 800 interface, partitioned in an HFS volume + and an NTFS volume.
Host software: OS X Leopard 10.5.5; running VMware Fusion 2.0.1 build 128865; Tracks of partition Boot Camp newly installed Windows XP Pro with Service Pack 2.
Software comments: I would like to convert the Boot Camp XP Pro SP2 in a VMware virtual machine.        Running VMs with Kubuntu and NetBSD since the hd internal.

You can just get rid of the all/Users/lincoln/Library/Application Support / directory / Machines/virtual VMware Fusion; It should all be recreated. The virtual machine to help naos is than the pretreatment of Boot Camp. You don't want to get rid of all the of them, the only one in the specified directory. For example, there is a blank template in Applications/VMware Fusion.app whence that of your home folder.

• How can I make the smaller page content that I can see all this?

  When the screen appears on my screen I have the bars scroll left and right and up and down to see the page... How can I reduce to see at the same time?

  Hello
  Have you tried the Firefox zoom feature? This initiative will increase the size of the web pages.

  • To make things bigger, press Ctrl and + at the same time.
  • To make things smaller, press Ctrl and - at the same time.
  • Pour reinitialiser to reset the size of return to normal, press Ctrl and 0 at the same time.

  You can also use the NoSquint. Add on to change the zoom level by default for all websites at the same time. After setting your overall zoom level, you can still adjust the zoom on different sites.

  With the help of NoSquint:

  1. After installation of NoSquint, make sure you have the add-on bar displayed:
     • Click the new tab button ("+") or a box empty bar tab to the right of the item and choose the module bar on the shortcut menu.
  2. Click on the % in the bar of the add-on call site preferences, then click the global settings button, then the zoom tab.
     • You can experiment with sizes greater than 125%, but it is not recommended that you will more than 150%, unless you have a large screen high resolution.

  If there are sites that are still a concern, feel free to post their URLs.

  Please let us know if this helped you!

  Thank you.

• Help make the smaller Editor window

  I just installed items 12 andwhen I open a photo in the Editor window is too large, that vertically and mask the tool on the background options, so much so that I can't use the diagonal arrow move the tool in the lower right.  How can I make the smaller window? I can make the smallest window of horizontally but not vertically.

  What is the resolution of your computer screen?

• When I attach a picture to an email, how to make it smaller?

  Rather than send the image in General, I would like to make it smaller, so you can see the whole image on the screen, instead of having to scroll up and down.

  You use an image editor and image size before attaching the file. Use the right tool for the job. Thunderbird is an email client and not an image editor.

  There are several editors free image out there. IrfanView is a good.

  http://www.IrfanView.com/

• Make a small change to an old project - how can I know which versions of drivers and RIO etc. has been used for the last good generation?

  If I want to make a small change to a legacy project for years before, I would limit my risk using the same exact versions of LabVIEW, etc. NOR-RIO.  So I check the project from the repo, but I do not know how to check what versions have been used when the last know good generation was carried out.  I don't want to introduce questions by recompiling mass to the latest version.

  What is advised in this case?  I could, before every posting of repo, take a screenshot of the tree of MAX software and save it in the project file.

  Any ideas?

  Rather than create a screenshot of MAX: MAX can create a report for you. You can take all the information expected of her.

• Is anyway to create fifth partition and keep the basic hard disk?

  Hi, my laptop is g7 1207se Pavilion and the and HP has made 4 partitions (C for windows) and the other 3 for system files and recovery, I want to create a new partition for my files (so I can recover my system without losing them) or install other operating systems, but apparently if I want to create fifth partition I have to convert my hard drive in Dynamics by the practice that I won't be able to boot from any partition but the C, which means no recovery and no other operating system.

  Is anyway to create fifth partition and keep the basic hard disk?

  Hello

  See the excellent guide of Daniel_Potyrala on the link in this regard.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/TD-p/742019

  Kind regards

  DP - K

• I'm not able to merge the partition not used to the local disk partition

  I'm using windows xp service pack 3 and I have deleted my partitions from disk 2, but im not able to merge the partition not used to the local disk partition, what should I do?

   
  Original title: HELP ASAP!

  Hi Joseph.

  Suggestion of PML in the thread below, can be very useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-do-i-merge-two-partitions-in-XP/d2a7fa28-b2dc-41F6-9cd3-2c2beb6c6865

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• bought a bigger screen & screen is stretched. How can I make it smaller?

  bought a bigger screen & screen is stretched.  How can I make it smaller?

  Hello

  I suggest you to adjust the screen resolution.

  Here is the link:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

• Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Computer is a 32-bit Dell XPS * SP2 Windows Vista (Home Premium), Internet Explorer 9 Panda anti-virus

  Nothing new and NO change has been made.

  Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Even when I hide the taskbar I always can't NOT see the background.  Thanks in advance for any help. It drives me crazy.

  Set your resolution to be higher.  Right click on your desktop, go to personalize, then choose the resolution down.  Set it to the highest setting.